Automatic analysis of the problems of common places

Similar Questions

• With the help of "common places" find iPhone

  Hello

  I think I know the answer but I will ask anyway.

  Is the data stored in "Common places" on the iPhone storied nowhere else, let's say the cloud?

  My phone turned off and is lost so I can't use "find my phone", but if I could use frequent places I might be able to find

  Thank you

  Eric

  When when setting up 'find you my IPhone' on the settings, this would probably use frequent places; There is a setting where you could turn 'send my last location' that sends the last location that your phone has been seized has been disabled. But you can not access "common places" remotely.

  I recommend you turn off lost mode so when someone lights up, they can contact you.

  XbLADE72

• for a week and the victory like 7 and mse will be automatically updated and the problem is not repeated on my copy of licened end clean to stall

  I installed clean several times to offer since the victory of 10 factory restore was deleted in July 2016 none of my operating system of windows and MS security essentials error code 0 x 80004004 were able to auto update via windows update.

  I used the stand-alone version and which do not work Ive used all update patches, they do not work ive not done reference also with the cmd no results at this stage, the problem is not on my end, so the problem seems to be in the Microsoft server ends that would be true?  net internet connections work on my end

  Windows 7 update problems? First read this.

  :)

• Analysis of the problems after the installation of Adobe Reader DC

  Hallo,

  I have a PC, 64-bit Windows 10, Fuji Xerox printer model CM205f.

  Until that I installed Adobe Reader DC, everything worked well, including scan from the printer to the PC by direct USB connection.

  After you have installed Adobe Reader DC, I can print files, but the scan from the printer to the PC (by direct connection of USB, no hub) no longer works.

  Fuji Xerox printer has a Chief Express Scan that defines which drive/folder scanned files should be saved. I ran the Express Scan Manager to renew the bond, but always scanning does not work.

  The problem started after installing Adobe Reader DC, I approach this forum to ask for solutions.

  Hi oemlegoem,

  Please see this KB doc for help: issues in Adobe Acrobat troubleshooting scanner and check if it solves your problem.

  Let us know if problem still persists.

  Kind regards

  Meenakshi

• ScanJet 5470c: analysis of the problems with Scanjet 5470c

  Hello

  Maybe you folks could be useful.

  When scanning photos, negatives and slides on various

  resolution levels (usually 300 dpi or 1200 dpi), I find myself

  with bars horizontal color in the picture or portrait

  "moir' effects on the whole of the scanned image.

  The machine is now 12 years old and works perfectly in

  all the other erspect.

  I usuallu use the auto setting but have also tried various

  other settings to no effect.

  Any ideas would be appreciated thanks.

  Hello @tascan.

  Welcome to the Forums of HP's Support. I understand that you have found horizontal bars of color when scanning. I would like to help.

  I could not find any troubleshooting documents online. It may be that this has to do with the age of the scanner. Have you tried to reset the scanner?

  Important: when you perform this step, close the lid of the scanner for a calibration OK scan.

  • Lift the scanner cover and then remove the paper from the scanner glass.
  • Close the scanner cover.
  • Press the power button to turn on the scanner.
  • With the printer, unplug the power cord from the back of the scanner.
  • Unplug the power cord from the wall outlet.
  • Wait at least 15 seconds.
  • Plug the power cord into the wall outlet.
  • Reconnect the power cord to the scanner.
  • If the scanner does not automatically turn on, press the Power button to turn it on.
  • Try to copy, fax or start a new search.

  This give a try. I will continue to look for other possible solutions.

  If this solves your problem please click on accepted Solution so that other people with the same problem can find the solution faster.

  If you have any questions, please let me know.

  If you with to say thank you, feel free to click on the button of congratulations.

• analysis of the problems with PSC 1510

  I've had this all-in-one printer for several years now without any problems. I don't remember the details but I had to uninstall and reinstall the software for this machine - with poor results. It seems to be without capacity to scan now. I went into the folder program files and searched for a .exe for scanning file without a bit of luck. What I am I missing is a separate installation of the scanner software software? I can't find anything related to the analysis of software for download on the site and I have a disk of the machine set in my possession. I don't know what to do. Thanks in advance for your help.

  Oh I'm sorry I was not able to explain it clearly.

  After inserting the installation disk

  Open my computer. You will have the D: / drive where he had the HP for your PSC disc. Right click and explore it and follow the instructions above

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".
  (Although I am employed by HP, I speak for myself and not for the HP)

• Analysis of the problems with C309G (wireless) and Snow Leopard 10.6

  iMac with OSX 10.6 (Snow Leopard)

  C309G-M put in place on the WIFI network

  Latest drivers installed

  Scanning does not work with preview or Capture of Image or the HP-Scan utility. Overview analysis always selects a portion of the A4 page even when the option is not checked. Is this a bug in the driver, or is there a workaround?

  You can try to uninstall HP in this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

  Hello world

  My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

  I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

  Now, the challenges:

  1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

  2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

  If someone had the same problem, and if you have, how you go about it?

  Thank you.

  

  Hello

  HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

  You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

  You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

  Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Then, try to scan using HP Easy Scan and check if it works.

  If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

  Kind regards

  Shloi

• Analysis of the problems with the new HP OfficeJet 8500 all-in-one

  I recently purchased HP OfficeJet Pro 8500 A and the scanner does not work properly. After 8 hours (really) on 'chat' with HP I was told that I have to upgrade Windows XP to Windows 7. I also have some old Acrobat 6 on my laptop. Two questions: will be updated to Windows 7 remedy problems scanning or do I also have to upgrade to Acrobat? Thank you.

  Hello

  I don't know why HP would recommend the upgrade to Windows 7 when there is XP drivers available for the printer, if it's the right model:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3752459&

  Install all the drivers/software listed for their printer, and then try again.

  Check the troubleshooting steps provided in the article below.
  Slow / no response from the scanner
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=53195&tmp_task=solveCategory&LC=en&DLC=en&cc=us&site=null&product=3752459&key=null

  Also, here is the link for Windows 7 as for Acrobat 6 compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Adobe%20Acrobat&v=Adobe&UID=6&l=en&pf=0&PI=0&s=Acrobat%206&OS=64-bit

  Refer the article to upgrade to windows 7.
  Upgrading to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

• analysis of the problems since installing windows 10 / Office 2016

  I have just instaled Windows 10 and office 2016 on a new machine of HP. I have a HP2540 printer. The scan option no longer appears and I had to go through a complicated process to locate it. There must be an easier way?

  Secondly, when I scan a document I want to keep it as a pdf, but this does not seem to be available. Help please!

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system?

  Hope this is the correct printer:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-2540-all-in-one-printer-series/5295960/model/5295961#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Editable table automatically updated after the entry line

  Hello

  JDev 11.1.2.4

  In a table of clickToEdit, the editable line has several selectOneChoice and inputText. When the user changes a value in the editable field, the line is automatically updated. The problem is that if a user changes the first field and press tab, because the row is updated, the focus is lost.

  Why the whole line is updated?

  Thnaks

  Go to pageDef and iterator ChangeEventPolicy value = 'none '.

• When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem just occurred, was not there before.

  Curiously, an error just for me that was not there until tonight (I have nothing new installed on my firefox). When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem, no matter whether on gmail on an email, facebook or a web page regular when I try to select my browser text is now scroll upward on its own literally as soon as I'm going to highlight, that means I end up selecting everything on the page when it scrolls upward. Can anyone shed some light on how I can solve this problem suddenly?

  Thank you

  I am pleased to learn that you have been able to solve your problem of Firefox.

  I reported this problem to the addon developer, in the hope that they will be able to patch the issue soon.

  Please use the Mozilla Support Forums. We hope that you will continue to sail with us.

• MI iPhone 5s come, turn the changes when I place my finger close to her. How to solve the problem?

  Its been almost 9 months since I bought the phone. the problem started a few months back, but it was not frequent it. Whenever I take my finger near it or place it on the ringer switch, it changes abruptly from his State to ringtone and then go back to vibrate. It is very annoying when I have to play games in landscape mode.

  It seems that your switch as expected. Do you mean the physical switch is so loose? He doesn't have to show the orange line up to be turned on/off in order to remain silent?

  Another suggestion would be to return your phone and hold it so your index finger is on the side of the iPhone which has no switches or buttons. You can return your phone either in landscape mode.

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?