Automatic playback of QuickTime problem

Similar Questions

• Videos automatically go to Quicktime player and I see the video, but have no sound... HELP trying to set up a wedding that I just shot!

  I'm having a problem with when I upload a video, it automatically goes into Quicktime and then when I go through the video that had been shot, there is no sound, I can't transfer the file... nothing. I'm extremely frustrated... Please, any advice would be wonderful. I'm working on a Windows Vista with many programs to try to choose and all I get is the Visual and no sound. I tried everything known to man on the audio part and etc... help please check

  What is the brand and model of your camera?

  I'm guessing that when you say that you "load video".
  you mean that you are copying from your camera?

  Files are not checked in a media player like
  QuickTime... it is simply a viewer. The file must be
  saved somewhere on your hard drive... no doubt
  in the folder of your video.

  The following article explains how to change
  the association of file... that's what dictates that
  the program is launched to display a certain type of file.

  If the video file format (extension). MOV
  QuickTime is the appropriate viewer.

  Windows Vista - change which programs Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Hello

  I suggest you to try the steps in the following Microsoft Help article and check if it works.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen?

  Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen? Thank you!

  Not that I know of.

  You can always send a feature request: Final Cut Pro--> provide Final Cut Pro Feedback...

• How to disable automatic playback.

  When I insert a CD in the drive to install it on my computer, AutoPlay appears a clipart image.  How can I prevent that to happen?

  OT: Auto Play

  Hello

  What operating system is installed on the computer?

  If you want to disable automatic playback, I suggest you try the steps from the following link:

  AutoPlay: Frequently asked questions (how can I stop AutoPlay from asking me what program I want to use?)
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

• Problems in automatic playback SWF?

  Hello

  Most of the flash files is now having the problem in loading / AutoPlay

  When a right click and click Play, and then it starts playing

  is - this problem is caused by the new flash Web Player?

  Most of the people is facing this problem

  Thank you

  SWFObject that has an autoplay setting and reuse SWFObject updated. When things like this happen chances are you do not suffer.

  for example

  var so = new SWFObject (...);

  so.addParam ('autostart', 'true');

  ...

• Multitrack playback / export question - problem with envelope

  Hey all

  I have an unusual problem with playback and export of my multitrack session.

  I have a track with dialogue and occasionally actor lines must have a deep, 'voice of the demon' fade gradually. For this I have applied an effect to the track and then automated, the 'Mix' envelope for the plugin that I use to create the voice deep.

  However, when I play back audio, the deep voice effect continues even if I spent the envelope mixture at 0. If I drag the playhead to the rear slightly and press play, when the playback head is directly above the effect, he plays well. If the effect essentially ignores the Automation so I play through from the beginning, but if I jump, automation is recognized.

  I thought it could just be a fluke with the reading, so I tried making the track. However, pre rendered also completely ignores the automation of the envelope and the effect is at the same level throughout the duration of the session, even if I disappeared the mixture up and down several times. The same phenomenon occurs when I export the multitrack session, it does not take into account automation.

  Is there a solution to this?

  I'm editing on a 15 "Macbook Pro (8 GB of RAM) in hearing CS6 retina

  Thanks for the help, hope this makes sense.

  So, I realized a work around.

  Instead of automate each effect on the same audio track, I created several buses, each bus with a plugin. I can automate the envelope for the composition of the bus and send each bus to the later bus and therefore have a channel for each effect. Tedious, but it works.

  Just a few defective plugins I guess, probably not the fault of the hearing.

• Automatic startup on t410 problem

  We have recently implemented a citrix VDI in a server of the box and have created several virtual machines. The virtual machine is running without problems.

  To connect to the virtual machine, we use hp smart client type t410. These seem to work when "logon" is pressed manually on the citrix receiver well.

  Some clients are however, simply lie being "spectators". This means that there is no mouse or keyboard connected. So what I need is the client lightweight hp smart to connect to the virtual machine automatically.

  In the hp customer profile, there is an option 'autostart' under the root/ConnectionType/xen/connections / [ID] /. But when I set this option to 1, the client tries to start the virtual machine (he says that the virtual machine load), but shortly after, it seems that citrix receiver is blocked (I see the HP logo and citrix receiver is back on the login page).

  I tried a lot of combinations of registry settings, but none seems not to work. Also the autostart parameter accepts values from 0 to 5, but it says anywhere what is the difference between 1 and 5. Could I be on? Should I go home from another angle? Maybe it's a known bug in the hp receiver client or citrix?

  Any help is greatly appreciated.

  Apparently the problems were caused by the autoLaunchSingleApp parameter (although I'm not sure why).

  By using the following parameters does autoStart works correctly:

  autoLauncheSingleApp = 0

  autoStartDesktop = 1

  autoStart = 1

  Also set the domain and credentials are required.

  (all the above mentioned are under the root/ConnectionType/xen/connections / [ID] /)

• Automatic update because of problems with the USB ports.

  After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.

  This must be a different problem from what I had so...

  In any case, I uninstalled all updates on vista (as opposed to other programs, office, outlook, etc.) and then reinstalled again and everything works fine now... go figure: /.

• Cannot restore Word 2003 as an editor for Outlook 2003, after May 10, 2012 automatic update. KB2598332 problem?

  Had to go back to May 9, 2012 point to fix this restoration. Equipped AM Vista 32 bit with automatic updates. Office 2003 is the professional version.  Someone else had the same problem?

  Hello

  I suggest you to restore the system to an older restore point and check.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Pass the music playback is a problem on all music players.

  I have been through the forums and followed many instructions. I still have to solve skip play on music (and video too). I think the problem started when I installed Vista service pack 2 and a series of additional upgrades. I completely deleted the drivers and allowed windows install new "generic" HD sound drivers. I have a relatively old FS Amilo Xi 1554. I then ran the automatic Deskcheck of FS, which replaced Microsoft with audio drivers Realtek audio drivers. So now I'm back to square 1 and still have the problem to pass. I don't want to change to Windows 7 and waste even more time and money if this solution cannot be found... Maybe it's time to make a donation of this "dinosaur" 3 year old to the local charity?

  Hello

  To resolve the issue, try disabling audio enhancements and check if it helps.

  Please follow the steps mentioned below:

  1. open sound by clicking on theStart button, thenControl Panel. In the search box, typesound, and then clicksound.

  2. on theplayback tab, clickspeakers, and then clickProperties.

  3. click on the tabimprovements and then check thedisable all enhancements .

  If you do not see theenhancements tab in thespeakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  Check out the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• First 2015 CC - playback on Mac problems - blocks, stops, then crashes.

  I scoured the forums and have not found a solution, but I found a lot of other users having this problem.

  In 5-10 minutes of work in a project first CC 2015 file, operations and playback becomes slow. The playback feature and the button stop all together, then spinning "beach ball" appears and I have to stop smoking. It is a new project created in the updated version of the CC 2015 with all files hosted on a USB3.0 G-Drive. (I tried the project ranging from the car as well as the office). I have a fx trial period third package that has perfectly worked in CC 2015 until three days ago (when this problem started occurring).

  Has anyone found a solution yet? I was on chat and screen sharing with Adobe customer support for two hours today and they couldn't understand it. This question made me back off a whole day in a turn already extremely tight around. I had to restore my 2014 CC of an XML project. Adobe... If you please correct this to your loyal customers!

  Specifications of the computer:

  iMac (retina 5K, 27 inches, Late2014)

  Yosemite V 10.10.4

  4 GHz Intel Core i7

  32GB memory DDR3 1600 MHz

  AMD Radeon R9 M295X 4096 MB

  My #2 answer is 10.10.4 Premiere Pro CS6 (OSX 10.10.4) breaks down repeatedly

• PSE8 Organizer not automatically playback media card

  Hello

  I have a client who use PSE8 Organizer and all of a sudden he stopped to read the map support automatically. My client believes that this happened after an update of Adobe Updater.

  They say he used a simple process to place the card in the card reader and then a pop up window would be where they would select the icon / program to PSE8, but the icon was gone, and when you click on this link, my client has been presented with a message saying the link was broken. I have advised my client to uninstall the program and then to reinstall, which corrected this problem i.e. the icon and the back, and when you click on the link there is no message.

  However, it is that it will, the link produces no result and the media card is not read.

  If my client accesses the card as a file via PSE8 Organizer then images are displayed, but even once, are not automatically loaded into the application.

  My customer really want restored auto.

  If someone has had this problem and knows how to solve it please?

  The computer is running Windows XP 32-bit SP3.

  The only quirk I see is that the application is installed on the external hard drive instead of the hard drive internal normal. Would this cause problems with the application?

  Thank you

  CliveSRT

  Make sure that you select Organizer PSE and not PES Editor.

  It may be necessary to click Browse in order to select the right application.

• Automatic update of Windows problems!

  I ran the auto update 12/09/09 16:00 OK. When I got to initialize at 20:00, I could go to my office and all the icons were there, but I couldn't access anything whatsoever. I went into safe mode and tried to restore to before the update and also around a week ago. Now, when I boot on the desktop is empty with just my screensaver. I went back into safe mode so that I can access the internet. Anyope knows how can I fix? I'm quite angry ' cos it worked fine and I don't have a lot of time on this issue or want to pay someone to do it! Help, please.

  Hi hb813,

  Welcome to the Microsoft Answers community.

  a. updates have been installed in your computer?

  Steps to check the update history:

  1. Click Start and select Control Panel.
  2. Select Windows Update.
  3. click view update history.

  Also, look for error messages in the observer of events and post back error messages exactly so that I can help you better.

  Measures to check the application event log:

  1. click on start.

  2. in the search box type eventvwr.msc, and then on enter.

  3. now, click Application in the event viewer (local).

  4. now locate the event log on the right side of the event viewer window.

  For more information visit:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You try to install the update to windows in clean boot mode. This problem may be due to software conflicts, running in normal mode.

  Steps to clean boot mode:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, update your computer.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support