Availability of Bluetooth and Gigabit Ethernet?

Similar Questions

• Wired router with POE and Gigabit ethernet to run two AC1750 access points?

  Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

  I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

  Many thanks to you all.

  I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

• Airport Extreme Gigabit Ethernet and Jumbo frames

  Hi all.

  Can anyone support me kindly about Gigabit Ethernet & Jumbo Frames with Airport Express?

  I currently have and use a 5th generation Airport Express and you want to buy the QNAP TS - 453 Pro NAS. In any implementation of storage NAS, Gigabit Ethernet, the frames extended as matching Ethernet card well, are all very important to achieve broadband performance, so my questions are:

  5th generation Airport Express

  
  

  • Are the NETWORK Gigabit NIC Ethernet card?
  • It also works with extended frames (QNAP NAS supports 4074, 9000 and 7418 bytes for MTU)?
  • QNAP can trunk NIC (if more then one) with the following options:
    • IEEE 802.3ad (dynamic link aggregation)
    • Balance-tlb (Adaptive Transmit Load Balancing)
    • Balance-alb (Adaptive Load Balancing)
    • others (mainly for failover)

  Is 5th generation Airport Express enough or should I think about moving to the 6th generation?

  Thank you.

  You mix up the terminology... Express and Extreme are totally different.

  The title is correct... Extreme... your question text replaces by Express... they are only 10/100... and gen only 2 of them.

  Any airport extreme Gen2 - Gen6

  Use the Gigabit ports.

  Do not support jumbo frames

  Do not support pairing.

• AirPort Extreme, gigabit Ethernet switch and covering my house

  I have an AirPort Extreme 802.11n to Time Capsule wireless router. I have an old House. It was built in 1852 and microwave ovens have a hard time penetrating through some walls.

  Recently, I made some changes in the House and I wired things for Gigabit Ethernet. I have not yet bought a switch. We have a Mac Pro (cheese grater), a Mac Mini, three iPhones (only 6) and two iPads (one version 3 and the other, only the latter bought autumn, an iPad Air.)

  First of all, since most of us are on 802.11 n, can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch? Also, I need two switches; one for the internal LAN and the other for a connection to the Internet? I intend to buy the new ac 802.11 AirPort extreme for a facility in one of the rooms to better cover the rest of the House. I think that both devices will be able to take advantage of the signal of 5 GHz, initially, with another iPad and iPhone to come along the next year. I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

  Comments are welcome here. This can be a trip to a Genius Bar if I do not hear from final here.

  can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch?

  Possibly, depending on the type of modem you have. See below info in this post.

  Also, I need two switches; one for the internal LAN and the other for a connection to the Internet?

  NO.

  I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

  Not sure what you mean here. The two extremes of the airport will be connected to the cable network, so they will be in communication with them at all times. If you want to peripheral switch between them that move around the House... then you will need what is called a "mobile network"... so the two airports will produce a wireless signal that uses the same wireless network name. Apple Setup Assistant will put things this way by default.

  Depending on the type of "modem" you have, the network might look like this:

  Internet > Modem > AirPort Extreme 802.11ac > Ethernet switch > AirPort Extreme

  or, if your "modem" is really a modem/router, also known as, a walkway... then you have the ability to set things up like this:

  Internet > Modem/Router > Switch > the two airports to connect to the Ethernet network

  Looking for a Gigabit Ethernet switch to your network. Switches come in 5 ports, 16 channels, 8 ports, etc. versions.  It's always a good idea to buy an Ethernet switch over a few ports that you think that you may need right now... to allow for expansion.

  The key here is that the type of modem you have will determine how to configure the network.  If you could provide the number of brand and model of your "modem", we can eliminate some of the assumptions to be used at this time.

• I run xp coffeehouse get an icon remove the device safely. I check it and it is for a card broadcom netlink gigabit ethernet which can not be deleted

  I run xp family on a computer laptop hp compaq 6510 b.  The broadcom netlink gigabit ethernet adapter is part of my motherboard.  Why do it and can I get rid of him?

  Hello

  1 have had any changes made to the computer before the show?

  Restore the system to the date and time when the computer was working fine.

  http://support.Microsoft.com/kb/306084

  If this message has always been to present its likely that the Ethernet card that is built into the computer is connected to the motherboard using a USB connection (this is common in laptops). If this is the case, there is nothing that can be done to remove the message that the deactivation of the Ethernet card, but this will prevent you from being able to use wired Internet/network connections.

• Gigabit Ethernet on PC Pavilion Slimline s7700n

  Is it possible to get a Gigabit Ethernet card in or on a Pavilion Slimline s7700n PC?

  Thanks for the reply.  I know there is a PCI slot but it is also stated in the specifications of the product is not available.  I didn't remove the system cover, but I'm not opposed to doing so.  According to research at the back of the PC that a PCI slot is probably occupied by a dial-up modem.  If so, can't remove it and use a gigabit adapter in its place?

• Cannot configure embedded card Gigabit Ethernet...

  Hello

  I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.

  Is Windows XP SP3

  I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!

  My Broadcom 802.11n wireless card is in place and works fine

  Documentation of the specifications Apple says:

  • Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)

  When I ran PC-Wizard, he told me:

  Network card:

  BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe

  If I go to computer management program and open the list of Device Manager

  Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...

  How to proceed with the installation?

  Any advice?

  Thanks in advance

  You have the DVD with drivers?

  See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Is it possible to use the Apple Watch with bluetooth and data celular (for example in a remote area withouth wifi)?

  Apple Watch with bluetooth

  Hello

  Apple Watch can still be used in conjunction with the matched iPhone (which is based on cellular services) in places where there is no Wi - Fi network.

  The availability of some built-in and third-party applications can vary, depending on your cellular data settings and a network of cellular data speeds.

  If your question relates also to longer term, it is not currently possible to update the software on Apple Watch unless the paired iPhone is connected to a Wi - Fi network.

  Some built-in functions of Apple Watch can still be used even when the pair iPhone is not available via Bluetooth or Wi - Fi.

  More information:

  Bluetooth and Wi - Fi on Apple Watch

  Use Apple Watch without her sister iPhone - Apple Support

• envy h8 1559: there is no such thing as RTL8171EH-CG Gigabit Ethernet Controller.

  Hi Hp.

  My Network RTL8171EH-CG controller do not exist in the system. I use all the command lines that I know not, but nothing.

  what I get from ip link: lo: LOOPBACK, upward, LOWER_UP > mtu 65536 qdisc noqueue State UNKNOWN mode DEFAULT default group
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00.   Is - fixable?   Tkanks

  Hi,: RTL8171EH-CG Gigabit Ethernet Controller was destroyed because I removed the video card and ram to upgrade to them.

  I bought an ethernet card external usb 3.0 and it's all good now.   Good bye.

• Thunderbolt to Gigabit Ethernet adapter not working

  Hello

  I'm new to this community has never had a problem on my mac since I had last year.  MacBook Pro retina mi 2014 running El captain.

  My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.

  I use also fell in love with VGA Converter works on the two test port.

  I also reset the PRAM and the MSC still nothing.  Also restored some peripheral preference to another forum I found on the internet.

  I created another account from administrator to test to see if the interface resumes, still nothing.  How ever wifi works without problem

  Thanks in advance if anyone could help with my problem.

  Dump of information systems presents its collection as below.

  Bolt of lightning to Gigabit Ethernet Adapter:

  Name of seller: Apple Inc..

  Device name: Thunderbolt to Gigabit Ethernet Adapter

  Vendor ID: 0 x 1

  Device ID: 0 x 8003

  Revision of the device: 0x1

  UID: 0X0001000203A8FCF0

  Apple serial number: DTN450706APDWKHBZ

  Route of chain: 1

  Firmware Version: 5.5

  Port (upstream):

  Status: Connected device

  Link status: 0x2

  Speed: up to 10 Gb/s x 1

  Port Micro Firmware Version: 0.0.8

  I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.

• Qosmio G30: I can't find the Linux for the Bluetooth and TV Tuner drivers

  I have the Qosmio Q30 HD-DVD (PQG32) on Ubuntu Linux. My problem is that I can't find drivers for Bluetooth and TV Tuner.

  Toshiba supports Linux? If so when I find it?

  Hi mate,

  Unfortunately toshiba officially doesn´t support linux, there is officially no drivers available. But toshiba has created a site for linux users, where they can find useful information:

  http://Linux.Toshiba-DME.co.jp/Linux/

  I hope you get what you need. :)

  See you soon

• Gigabit Ethernet through AirPort Extreme

  I just got a gigabit home connection. If I connect my iMac via ethernet to gigabit municipal internet provider modem, II can get about 800 Mbps download based on the file netspeed.com. Nice.

  However, when I use my Airport Extreme as a router ethernet (put the extreme between the iMac and the modem) my speed drops to about 1/10 of that.

  None of the devices that I currently own are capable of handling 802.11 ac, so I know I could not anywhere near gigabit wireless speeds. But it would be nice to have the fastest speeds on the one machine I intend to connect via ethernet, then connecy to the extreme wireless.

  Airport Extreme really limit the ethernet so? Is there a setting I can adjust for more fast ethernet routing?

  If the AirPort Extreme 802.11ac is configured as a DHCP and NAT router, then the WAN to LAN speed will be limited to about 300-400 Mbps.  Check the results here:

  http://www.SmallNetBuilder.com/tools/charts/router/view

  If the AirPort Extreme is configured in Bridge Mode, then you would expect to see 600 - 700 MB/s speed this way.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/75-LAN-to-Wan

  If you don't see results, then the AirPort Extreme is not to negotiate properly with your modem speeds.  Unfortunately, Apple has removed all the settings to manually adjust WAN port on the AirPort Extreme 802.11ac speed, so there is not much you can do others try a few unusual things...

  One of them would be to insert a Gigabit Ethernet switch between modem and AirPort Extreme to see if it will negotiate better speeds like that

  Another would be to try an Ethernet cable between the modem and AirPort Extreme cross.

  If none of these things help, then you should ask Apple to replace the AirPort Extreme to you and hope for more luck in the next test.

• Battery Bluetooth and Nokia PC Suite V6

  Hello

  I had a Satellite U300 with XP SP2, I try to connect my mobile nokia via Nokia PC Suite v7.0.8.2. He had no luck, my v6.1 Toshiba bluetooth stack

  According to Nokia, I need v5 Toshiba Bluetooth stack but I had no way to do it, in Toshiba web, only version 6 is available. Anyway to get it at Toshiba or should I google a lot for something that works.

  KR, Antonio

  Hi Antonio,.

  I use Nokia Suite 7.0.7.0, Toshiba BT Stack 6.10.10, XP Service Pack 3, Nokia6230 and have no problem to connect the phone to my laptop via Bluetooth and Nokia Suite. Maybe you can upgrade your computer to SP 3 and see if it works then.

• X 8 Dual Gigabit Ethernet Port Aggregation easily explained?

  Can you explain what that means?

  • Dual Gigabit Ethernet Port Aggregation

  In a totally non savy way

  @careyjames LACP is not available in AP mode.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29