Available memory, after froyo update

Similar Questions

• confused about the available memory after upgrade to ESXi 5.1

  Hi noobie question here

  After an upgrade to ESXi5.1 (wiped ESXi5.0 and installed fresh and imported 5.1 2 s previous VM), I can start is more two virtual machines when they use the 3 GB of RAM each. In ESXi5.0, it worked.

  I need to reduce 2.6 GB RAM for each virtual computer. The only thing that I see is this "total capacity" is 5.7 GB while the system has 8 GB of RAM. Please see the attached picture (I don't know what 'Full capacity' read in ESXi5.0, so I can't compare)

  I understand ESXi5.1 needs some overhead and that each VM needs some overhead, but I have yet an another 1.5 GB of RAM available for my VMs.

  8185 (ability)

  -2660-2640 (two machines)

  -231-194 (overhead for 2 virtual machines)

  = 2460

  Does this mean that ESXi5.1 uses 2.4 GB of RAM to run 2 virtual machines? The photo shows 984MB in use without the virtual machines are started. So start-2 VMs cause ESXi5.1 use 1.4 GB more RAM?

  If so, what form that would show? I am sure that it is me who is missing something, but please explain.

  Thank you

  Well Yes... somewhere down the line, the ESXi5.1 host memory usage was doped up to ~ 2 GB. In my system 32 GB, I use only 26 GB

  But even once, there are a few tweaks to release some 500MB in the configuration of the distribution of system resources tab. You can have a shot at him. But I wouldn't recommend it.

• Speed of memory after the update of the BIOS

  Hello

  I update my BIOS today and I don't of course that my RAM memory is working properly.
  When I run CPU - Z in the "SPD" tab I see that my RAM works with 533 Mhz.
  Should we perhaps 677 Mhz?

  Sorry for my bad English.

  Are you sure that the value is now 100%?
  Have you checked before update BIOS too?

• Milestone auto reboot several times after the update to froyo

  first of all, please excuse my bad English.

  I have my milestone (Thailand) update froyo a few days ago. After the update is complete. Most everything is OK, but I have an extremely important problem.

  Auto restart Miestone several times a day (3 - 4 times) then I try factory Autozero my device, but the problem did not go.

  Please top me how I can slove this problem.

  Thank you.

  Try to turn off your phone and holding the X button and the button of the camera on the keyboard when turning on/off.

  A road sign (triangle with "!") should appear, then press volume up button and camera button at the same time.

  A menu should appear, choose factory reset and then wipe cache partition.

  Then, restart the phone.

  It worked perfectly for me - but I have a European stage - so there is no guarantee I can give to you.

• 5 years of windows updates the historical use of the available memory lots?

  I want to delete Windows update history in order to increase the available memory.

  On Saturday, 22 September 2012 21:52:43 + 0000, rickxxx wrote:

  I want to delete Windows update history in order to increase the available memory.

  First of all, please note that the term 'memory' is used to designate the
  place where the computer contains the program and data with which it is working
  for the time being. It's normally a memory (RAM), but who can
  be extended with the page or swap hard disk file. The word
  'memory' is never used to refer to the space on a drive (be it
  It's a hard drive, floppy disk, CD, DVD or thumb drive). Space on a
  hard drive is normally called "storage" or simply "disk space".

  Call for 'memory' disk space is not so much wrong as we have just
  unconventional. In a sense, the disk space is, of course, memory, but the
  important thing to realize is that the word is never used in this way.
  and if you do, you do so at the risk of confusion seriously your
  public.

  So I guess that you may have about disk space, not memory. Do not
  remove the previous updates, since doing so put you back in the
  situation before the updates, with all the problems and risks to the security
  only updates corrected.

  Also note that the amount of disk space, you may save is relatively
  small. And if you are short on disk space, there are various things
  You can do this will save disk space.  But the amount of disk
  space will be only a few cents worth. If this amount is
  It would be important to you, not more than one
  Palliative and the only real solution to your problem is to buy
  a larger drive.

  Ken Blake, Microsoft MVP

• Sat Pro 2470 memory and BIOS update

  I recently received from Win XP SP 2 installed on the laptop and the free memory is very low (64 internal, additional 64 installed)

  I would like to add 2 x 128 MB to 320 MB total authorized under the current BIOS.

  After doing this, the manual says in Chapter 8 on page 7 that some files must be removed by following these steps:

  Click Start, and then turns off
  Brand to start the computer in MS-DOS klik OK

  Write to CD\Windows - renterb]
  Write the output - enter

  With XP, I can't find the option to choose start in DOS at the next startup. Is this also necessary when I add memory?

  Question: why should the battery be taken out when changing the memory? Isn't out enough power?

  WE BIOS: I can't find any information on what brings the BIOSupgrade available for this laptop. If I update the BIOS, which is the maximum size RAM and HARD drive? All the other important points?

  Concerning

  Jonas L/Brussels

  Hello

  I don't think that you should remove all files with Windows XP.
  Simply insert the modules of memory and power on the machine.
  Updated the BIOS normally does not increase the available memory.

  Good bye

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• BlackBerry Smartphones Low Memory/unable to update

  I have problems to install an update and receive low memory warnings.  I would like to help to find what I'm missing or what I else I can do...

  I have a Blackberry Storm 9530

  APS responsible

  5.0 software applications & core system

  Application of BB centre

  BB maps

  BB Messenger

  Browser

  E-mail ap configuration

  Help

  Memopad

  passwordkeeper

  Phone

  tasks

  Word Mole

  documents to go

  longer pixelated

  storm of Fandango

  number cruncher

  KaGlom-free

  VZNavigator

  The Ap BB world

  Visual Voicemail

  VCAST music Rhapsody

  When I run the listing via the office of accreditation, the total memory used (added by me) is 66.1 MB more 3693 KB.  This is based on the memory that the listing of the ap said that picks up every application.  So about 70 MB total.

  Says memory device total ap is 124 MB.  This means that I should have about 54 MB of available space?  Unless I'm missing something?

  But the device lists available ap as only 19 MB memory (immediately upon restart after pressing the battery)

  I could not install the last update (or rather the last one I tried updating, perhaps there was more since, I do not know) because it says that I need 33 MB to do.

  The device memory - total space Mo 879,2; 864,5 mb free space

  map of total support 7.3 GB of space

  5.0.0.32 device software version 8

  What takes this additional memory of ap and how enough space to download the update?

  I tried to download the update once, but he wouldn't let me finish... it's somehow possible that the update takes place without actually be completely installed?  Which would bring the numbers more closely to what they should be - if 33 MB is used by the update... If Yes, how can I delete and start over?

  When I run registration ap via the desktop software - the update is listed on the access point main list, with a status of "available".  And confess to 33.8 mb.  He appears again at the bottom under "consolidated request" - it is the only element that there are listed.  Under the column "pending action", it says "update".

  When I select/hilight an item in the list of the main application, when I select 'BB 5.0.0 core applications', the 'updated' appears just below, and they are hilighted together, not separate the elements.  Although they each have their own amount of memory use (14.1 MB for basic applications) and 33.8 MB for the update

  Yes, I sometimes forget to close the correct way - but I don't go as battery pull - and the available memory info above was immediately after a battery pull...

  Any help is greatly appreciated.

  Thank you.

  Berit

  First of all, don't try to do the math of memory on the device - used application space, because the math won't never worked that you think he could. Extra space is used by the application data third ECT is not counted in your totals, as well the browser cache and the media map caches and other things.

  You can do your upgrade in this way:

  See the link below for download and simple installation instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  Good luck.

• On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to fix photos [was: Hello,]

  On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to correct photo

  The program (Lightroom 6.3) systematically freezes and needs closure after every temptation of correction development.

  The development and mailing of the crush program program ' are at Microsoft did not help.

  My system dump here:

  Lightroom version: 6.3 [1052427]
  License: Permanent
  Operating system: Windows 7
  Version: 6.1
  Application architecture: x 64
  The system architecture: x 64
  Number of logical CPUs: 4
  Processor speed: 2.5 Ghz
  Built-in memory: 8155.1 MB
  Memory real available pour Lightroom: 8155.1 MB
  Real memory used by Lightroom: 1035.4 MB (12.6%)
  Virtual memory used by Lightroom: 1007.6 MB
  Cache memory size: 100.3 MB
  Maximum number of links used by Camera Raw: 4
  SIMD optimization of Camera Raw: SSE2, AVX
  The system DPI setting: 96 DPI
  Composition on the Desktop enabled: Yes
  Views: 1) 1920 x 1080
  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:
  AMD Radeon HD 7800 M series

  Check the supported OpenGL: past
  Vendor: ATI Technologies Inc.
  Version: 3.3.13399 context 15.200.1062.1004 the base profile
  Renderer: AMD Radeon HD 7800 M series
  LanguageVersion: 4.40

  
  The application folder: C:\Program Files\Adobe\Adobe Lightroom
  Access to the library path: E:\Lightroom\Lightroom catalog Qnap - 2.lrcat
  Settings file: C:\Users\Joe\AppData\Roaming\Adobe\Lightroom

  Installed modules:
  (1) external module connected mode Canon shooting
  (2) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002
  Device: 6827
  Subsystem: 31e1002
  Revision: 0
  Video memory: 1003
  AudioDeviceIOBlockSize: 1024
  AudioDeviceName: 1 - Philips FTV (AMD High Definition Audio Device)
  AudioDeviceNumberOfChannels: 2
  AudioDeviceSampleRate: 44100
  Build: not initialized
  Direct2DEnabled: false
  GPUDevice: not available
  OGLEnabled: true

  Thanks for the help!

  Go to Preferences, click the performance tab, and then uncheck the box.

• Don't see the screen applications & data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• How can I make a phone call from Apple Watch after the update of the software lasted?

  I don't know how to make a phone call from my Apple Watch after this update. I need help

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite U940 - after the update of Win8.1 FN key stop working

  I have ultrabook Toshiba U940-b484, after I updated my system windows 8.1 all FN keys does not work and after more try only up/down switch soung and brightness keys is just the word, and keyboard light switch is not working too, all solutions?

  Concerning

  I by Satellite U940-103 and I did Win8.1 with success. Everything works perfectly.
  My only solution is: Win8.1 update must be performed according to the instructions of update Toshiba Win8.1 instructions for installation and http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/ document which can be downloaded on Toshiba support and download page.

  Have you installed all the specific tools available Toshiba and utilities?

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads