average matrix in blocks of 10 columns

Similar Questions

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson

• ColdFusion, builder2 not minimize (collapse) average good code block

  As for this masking of the code does not work correctly:

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = "text/html"; charset = "utf-8" / >

  < title >

  Untitled document

  < /title >

  < / head >

  < body >

  < div class = "body-content container" >

  < div class = "row position" >

  < div class = "col-md-12" > ""

  < h3 >

  Search by product

  < / h3 >

  < / div >

  < / div >

  < div id = "ProgressIndicator" >

  < div >

  < / div >

  <! - this will make the vertical alignment - >

  < img alt = "Loading"... "src="Images/loading.gif"/ >

  < / div >

  < div class = "row" >

  < div class = 'col-md-3 columnleft' >

  < div class = "row" >

  < div class = "col-md-12" >

  < h6 >

  RESULTS:

  < select id = "resultRange" >

  < option value = "100" >

  100

  < / option >

  < option value = "200" >

  200

  < / option >

  < option value = "500" >

  500

  < / option >

  < option value = "1000" >

  1000

  < / option >

  < option value = "2000" >

  2000

  < / option >

  < option value = "3000" >

  3000

  < / option >

  < option value = "4000" >

  4000

  < / option >

  < option value = "5000" >

  5000

  < / option >

  < / select >

  < / h6 >

  < / div >

  < / div >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  Furthermore, I have tried your code snippet. If you look at the screenshot below, the code correctly collapses.

  

  And it is not to collapse the code below that. If you close a parent tag, then the subtags will also close.

  Kind regards

  Anit Kumar

• How to calculate the sum of the values of some columns in a table

  Hello

  I want to get the column just the average of the values of some columns not all columns of the table.what I have to change exactly in this block diagram.even if the table size is 25 average, I want the division as the number of values in each column (= number of lines)

  

  just like that:

  

  
  

• Average text possible?

  Is this possible in number in order to get an average based on text values.

  For example, in each line in a single column, I like text values: single, married, divorced, etc...

  Can I get a result unique back to the text format for the average text data stored in this column.

  A2 = Single

  A3 = married

  A4 = Single

  A5 = divorced

  A6 = Single

  i.e. the total majority of data = Single

  The AVERAGEA function assigns 0 to the text values in a range, your average of these unique column name strings will be 0.

• V13 Firefox is not consistent with the WC3 CSS columns

  I use to be able to see multiple columns in v12 but is no longer in v13. Chrome and Opera display several columns but not FF v13.

  Hello, the Date of issue for firefox 13 only could say that the support for the fill column property has been added - you give a link to a page where the problems occur?

  Edit: apparently there is a problem with the height of a block of several column property. that will be solved by a release of the correction of a bug in firefox 13, which will be deployed in the coming days.

• Satellite L630-15U - block during the use of the

  I have a L630-15U Windows 7 Professional 64 bit, when I use in battery mode after a few minutes it crashes often. Everything has been frozen, I need to turn it off.

  Hey Buddy,

  What do you think average either it blocks during use?
  This means after a few minutes when you use your laptop with battery only if freezes and has to be restarted, no?

  Well, it's not easy to say which is the reason. You use the original Toshiba battery? Otherwise I recommend the spare parts and test with an original Toshiba battery.

  Also, you could try a BIOS update. Charge the battery up to full East, leave AC connected adapter and start updating the BIOS as an administrator. Close all programs that are running before do you (also antivirus).

  Check this box!

• request (?) featured: matrices or tables for a particular column sort

  Hello all-

  This may be a stupid question, because I'm always still not quite clear on what are the differences between the matrixes and 2D arrays in LabView. So far the only distinction I seemed to find, it is that certain features of table return errors when the matrices are entered and vice versa.

  Anyway, here's my question.

  Suppose I have a matrix where the first column represents the 'values' that have been measured and the second column 'account'. I would like to take a unordered matrix (i.e., the value column is not ordered) and recover a matrix that has had its lines re-arranged according to the values in the first column.

  For example, if my matrix:

  [5-1;

  0 11;

  1-5;

  3-10]

  I would like to as labview to return:

  [0-11;

  1-5;

  3-10;

  1 of 5]

  When I was trying to find a way to do it (without writing my own sorting routine which, admittedly, wouldn't be too bad, but I'm a lazy programmer ), the only thing I found that came close was the 'matrix of D 1 sort' Subvi. However, even if I had to store the values in a table and charges in another table, I'd be able to do is sort the table values. I wouldn't be able to tell what labview reorganization, I would need in order to perform the same reorganization charges.

  I'm a little surprised that there isn't a quick and intuitive way to do this (at least that I can find). A LabView feature addition that could help with this problem would be if the "1 D Array sort" routine returned a second output - a vector with the mapping of the index used - similar to MATLAB. MATLAB help for the function 'out ':

  "[There, I] = SORT(X,DIM,MODE) also returns a matrix of index I.. «If X is a vector, then Y = x.»

  Of course, there may be a quick fix for what I'm missing...

  Take a look at this post. I don't know that you can change for your particular type of data.

  (in contrast to the first colum, create the sort key, table 2D reconstructed according to key)

• Multiplex several columns in a

  Hello

  This seems to be a pretty basic question, but I fight so he can work.

  I want to take a matrix (1) and convert it into an another Matrix (2) where Matrix (2) will have 1 column which is derived from the concatenation of column 1, followed by column 2... matrix etc. (1).  Thus the Matrix (2) will have more items by column but fewer columns than Matrix (1)

  All, that is the case, is essentially multiplexing a few lines from the Matrix (1) in a new column in the matrix (2).

  Thank you.

  Yes.  Do you need a transposition table before the remodeling.

  First function Array subset is down to 3 columns.

  Convert a 2D array.

  Table size and multiply elements in the array to get the total number of items in the table.

  Reshape the table

  

• Registration of image data to text - multi-column file

  Hello

  I'm currently grabbing images using functions IMAQ and am averaging of each image through the columns using IMAQ LinearAverages.vi. I am currently saving these values (IE a size of profile line 1: n) to a text file. However, I have a large amount of images (M) to capture, so I would like to display each image line profile data to an individual column.

  At the moment the text file captures all of the data, but in a single column, not very useful for the purposes of post-processing. Can someone suggest a nice way to do this? Records in a spreadsheet file better?

  I would appreciate any advice.

  Kind regards
  Miika

  
  

• With an average using the "basic DC/eff' VI

  I seem to end up using the "basic DC/eff" VI a little average my data to my DAQ system. However, I have a question about what's going on "under the hood".

  Let's say, for simplicity I acquire data at 1 kHz into blocks of 1000 samples.

  Thus, all the 1 second I push 1000 samples in the VI-DC/RMS database as a data type of waveform.

  This means that the outputs 'DC' and 'Eff' will update at the rate of 1 second.

  The question is, is "continuous" averaging? In the sense that if I was doing 'good' low-pass filtering (on average is just the same as the low-pass filtering) - say simple TREE with notches n - to the DSP, then the output of the filter would be updated at the same speed as data entry; That is to say. taps would be 'move along' the input data at the same rate as the input data passes through the filter. I'm guessing based on my above explanation that's not what's happening. Instead, the VI DC/RMS is on average an entire block of 1000 samples and then 'jump' 1000 samples along and doing the next block.

  This is not necessarily a problem, but it is not not true low-pass filtering and I can image some scenarios where there might be artifacts because the moyenneur filter jump 1000 samples whenever it takes on average. I assumed that the only solution is to implement filtering in a loop of much higher speed and this could prove problematic in the higher frequencies of sampling.

  Anyone got any ideas on that? I worry about anything?

  Dave

  Hi Dave,.

  The 'average base DC - RMS' feature is designed to work only with continuous acquisitions, it will lift a warning is the signal is not continuous. When you open the function and examine the code in the function there is a Subvi with status information, which permits the function to continue the average of the previous data block.

  For this reason, we provide a reset terminal if you need 'forget' the previous calculations.

  Much of this is discussed in the detailed help on function, but still sometimes there hands dirty to know how the code works and review the code.

  Concerning
  JamesC
  NIUK and Ireland

• Impact of removing columns in a table

  Hello

  Using oracle 11.2.0.3

  We want to remove some columns in a table in a tidy exercise - as they are not necessary - the application code that references will change them.

  Anyone see any negative impact: what are non indexed columns cannot therefore predict problems - just thought I would check in the case where someone met all similar questions making.

  Thank you

  Anyone see any negative impact: what are non indexed columns cannot therefore predict problems - just thought I would check in the case where someone met all similar questions making.

  Yes - there MAY BE negative effects.

  1. you can lose data if you do not have this table saved (or active flashback) so you can restore the data and move the original table if there is a problem during the operation. There is ALWAYS a risk of system failure even if the risk is low. Abandoned data cannot be recovered, so you better have a backup from top - to the second.

  2. the DROP operation actually deletes the data for EACH ROW in the table. This means a full table scan and possible restructuring of blocks. These columns can be part of, or severely, chained the lines. They could be the LOB columns whose data is stored in another segment that must also be cleaned.

  You have not displayed enough details for us to know what would be the issues here for your unknown column types.

  But exercise alone.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/tables006.htm#i1006709

  Deleting table columns

  When you issue a ALTER TABLE...DROP COLUMN statement, the column descriptor and data associated with the target column are removed from each row in the table. You can drop multiple columns with a single statement.

  At a minimum, you need to back up this table before and after the MOVE. This backup operation will use the resources so it can also have an impact.

• The values for the items in the list of the other data blocks appear not when running.

  Hello

  I have a new problem again.

  I'm a new form in which there is about 8 blocks. All blocks have their tables in the oracle database.

  Each block has 18 columns with the same column and the column names. But the values in these columns are different and do not match.

  The problem is while I sign the form, it fills only the first data block. Other blocks do not display or fill in the values.

  I can't create a master relationship because all column values are different.

  How show or fill in the values of all the tables?

  Please help me. Thank you.

  Hello

  If your form has really separated tables, then you can simply use a trigger key-exeqry at the level of forms of travel in each block in turn and perform a built-in query execute, eventually returned the starting block.

  That is to say

  go_block('..');

  execute_query;

  go_block('..');

  execute_query;

  etc.

  go_item (...);

  In this case, you would use the block where clause to constrain each table for the game proper.

  If, however, the database has no relationship between the tables, but the content of the data has a correlation, then you could create a relationship of forms manually.

  see you soon

  Stem

• NET horizontal paragraph in two columns of text?

  Hello

  as the title suggests, how can I get a horizontal rule to run across a block of two columns of text?

  I had no longer the rule applies only to the text entered. was a gap corresponding to the gutter of the column;

  or I had the value 0 mm/px column gutter and manually set the carriage returns to give the impression of a gutter.

  There must be a better way?

  I will attach a JPEG of my various options.

  Hope I was clear enough. Any help is appreciated.

  --

  Cheers, Matt

  

  • You can put the rule in a paragraph that is spanning columns.
  • Or you can expand nets paragraph by inputing without values left and right (by example-5 mm)
  • Or you can use a table instead.
  • Or you can use negative left and right intend for text but extend the rule at the end of the frame.

  Never set a carriage return manually.

• Extending column on does not because text frame columns go 2-1 repeatedly to the same file.  the fix?

  The problem: I want to have a title of subchapter on two columns of text on a page.  In two different places in the file, subchapter headings cover 1 single column of text.

  Details: The usual and desired text formatting setting is for two columns on a page.

  I have an ID cs6 file which, in two places, has a block of text change of 2 columns to 1.  Two columns of text are present on the page throughout the whole layout, so the file seems to be the formatting that I intend, but there's a glitch.

  When the section headers cover two columns, text frame options tell me I have 2 columns, just as he seems to have.  When the section headers will not cover the two columns, text frame options tell me that I have only 1 column. (but has two columns on each page.) Apparently two individual images side by side instead of an image divided into two columns.)

  The 2 columns in a 1 + 1 frame frame frame is changed across a page break.  I have two places where it appears. We're close to the front of the queue, and then the layout comes again 1 text block to 2 columns.  The last 5 pages are 1 + 1 framework framework side by side.

  If I try to define two columns where the formatting of the text frame tells me there is 1, it divides the column 3.5 inches in two columns (which would then give me 4 columns on the same page, by dividing the four columns that you want 2 columns int.)

  I tried to copy the text of the last 5 affected pages, deleting pages and paste formatted text, or even formatted.  No improvement.

  What should I do to tell the program that two blocks of text side by side or 2 columns in an image.

  One more detail: I have a paragraph style that holds the Chronicle spanning selected choice.  It should work if the style of the text with the paragraph style.  This is where the text block options see 2 columns, but now if she sees a.

  I entered the text at different times. I loaded it curson and use shift - click of the mouse to make the text paste and continue to add pages as needed.  Instructions in a few books that I give slightly different key combinations to do this in Windows.  Method to insert text that it would be the problem here?

  Thank you

  To?

  If I understand correctly, some pages contain two frames - the remaining frame remove the second image (assuming that all frames are threaded), resize, apply two columns.