Satellite L630-15U - block during the use of the

Similar Questions

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Satellite M60-164 - BSOD during the windows loading screen

  On startup, I get the blue screen of death during the windows loading screen.

  I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

  No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

  I think I know why you get a BSOD.
  You said that you have installed the Win XP SP1a.

  You must Win XP SP2!

  If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

  Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

  By the way; The Toshiba recovery disc can be ordered from the ASP

• Satellite A200-1TD - gel during the update of the BIOS

  I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

  I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

  Help, please

  Hello

  I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

  These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

  Moreover, on the Web from Toshiba site you can find an authorized service provider:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

  Welcome them

• Satellite A100-233 - freezes during the update of the BIOS

  I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
  Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

  OS: Windows XP Pro SP3

  And when I tried the BIOS update and load the new BIOS: ok
  Analyze the compatibility of old and new BIOS: ok
  Read old BIOSES: ok
  Save the old BIOS to the backup file: ok
  New Flash start cant BIOS and 1-2 min after the gel cell

  I solved.

  but really not funny...

  If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

  Post edited by: jadefox

  Hello

  I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

  On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  Welcome them

• Satellite M645-S4055: Disconnections during the installation of Windows XP

  Hello everyone

  I want to install Windows XP Professional on my laptop Satellite M645 S4055 but fail to do so. During the initial installation, it gives blue screen.

  Currently, Windows 7 Professional installed.

  I've upgraded BIOS 1.90 version also available on the toshiba Web site.

  Please give me a solution.

  Hello

  I imagine that you didn t include the driver to CD Win XP SATA.
  The point is that Win XP needs an extra SATA driver in order to be able to recognize the HARD drive that is connected to the SATA controller.

  Here's a nice Support Toshiba Europe basic knowledge FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  You should check your chipset and download the Intel Storage Manager driver on Intel page that would support your chipset.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite A210-15Y crashed during the update of the bios

  The worst case has happened and the laptop computer crashed during an update of the bios. I know that there is the possibility to repait the bios with a tool of recovery from crisis. For this purpose you have to press 2 keys (in most cases FN + B or Win + B) during the connection of the supply cable and the next start. I tried many books, but nothing happened. Can someone tell me the keys on which I have to press a 210 - 15Y satellite and maybe where I can get an image of cd of the tool of the crisis, because the laptop does not have a floppydrive?

  Hello

  As far as I know that the BIOS crisis procedure may be crazy by a technician of the ASP.
  You can not download a version of traditional BIOS who can update the BIOS from a USB FDD floppy.
  You can download only focused on the victory of the BIOS that can be run so that windows operating system is running.

  In my opinion, you should get in touch with a local ASP!

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• Satellite A100: Can WXP during the installation of Vista - I use Vista drivers

  Hello

  Will really appreciate if a member of the community could help sort my confusion...

  I had to reinstall Windows with XP SP3 in place and place of Vista the A100 was delivered with. I now need some drivers (Lan, WiFi, Bluetooth, USB) and wanted to know if I can still use the Vista drivers for the A100 (PSAA8E) available on the Toshiba support site, or should I look XP compatible drivers in other places.

  In the hope of receiving help from you guys.

  Thank you
  Gerard

  Hello

  If you have installed Win XP you use drivers designed for Win XP and not Vista.
  Win XP drivers do NOT work on Vista OS.

  In order to check the Toshiba page if some XP drivers are available.
  If you find not all drivers XP then you have to collect the XP drivers to your own hand

  But I m sure that some XP drivers are on the European driver Toshiba page.

  Big names

• Satellite L40 - error message during the installation of value-added package

  Hello

  yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

  I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
  I ran as administrator and also tried compatibility mode.

  Help please, thx!
  Constantin

  Hello

  Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
  My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

• Satellite A80 - 49 error during the installation of recovery code

  Hello

  I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disc and error #49 with writing problem appeared.

  I wonder what wrong with my laptop. What is a hard drive problem?
  Can someone help me?

  Thank you.

  Hi ClementLo,

  > error #49 with writing problem appeared.
  I put t know when you get exactly this message but theoretically, it might be a problem with the HARD drive. Perhaps he has bad sectors and must be replaced

  Can you also test the same using a disc of Microsoft? Maybe the disc is scratched