avoid restarting windows 2000

Similar Questions

• Network does not work after Windows 2000 SP4 P2V

  It has been a roller coaster get this virtualized machine.

  A little history: this machine is Windows 2000 SP 4 with update Rollup 1. After you install the Update Rollup 1, virtualization tried it and it gets to 97% and then I get the message error "vmware agent has encountered an error. When I try to start the machine, I get a BSOD with error inaccessible_boot_device.

  After reading some discussions fo I found a solution of reconfiguing the virtual machine then it will start. So now, I have a virtual machine that will start.

  Now my problem is that networks do not work. I removed the network card, has added a new, tried static and dhcp, through the Add/Remove programs and uninstalled all the devices HP and Compaq, went into Device Manager and deleted all drivers HP and Compaq or component, rebooted countless times and I am still ending up with no network connectivity.

  The network card on the computer virtual says it is connected and he says is to receive, but not send. It is not pulling a DHCP address and a static address gets no where also.

  I have more than 50 virtual machines so I know this isn't a problem with my network, it must be on the virtual machine itself. I don't know what else to try, and I'm open to suggestions.

  Thank you!

  Have you tried to repair the winsock?

  1. Go in Start > run, type: netsh int ip reset c:\resetlog.txt

  2. Restart your computer and you're done.

  3. Follow the steps below if you have XP SP2 (this only works on windows XP SP2 and later versions).

  4. Go to regedit.

  5. Go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services

  6. Click on Winsock and Delete.

  7. Click on Winsock2 and Delete.

  8. Close registry.

  9. Restart your computer

  10. Access the properties of the LAN connection

  11. Click the install button in the Properties window

  12. Select PROTOCOL, and then click the Add button.

  13. Click the disk...

  14. Type C:\windows\inf\nettcpip.inf in the dialog box, and click OK.

  15. Choose from the list of INTERNET TCP/IP PROTOCOL in the list, and then click OK.

  16. Click CLOSE.

  17. Restart your computer. (At this point the Winsock is complete)
      not only avoid this problem from happening in the future, but also
      to make the process much easier you update Windows.)

  Try the following steps: http://support.microsoft.com/kb/837333

• Tecra M9 - Windows 2000 ACPI

  I am trying to install Windows 2000 on a Tecra M9 (model PTM90).

  I slipstreamed successfully Intel Matrix Storage Controller drivers in my Windows 2000 installation disc, but the Installer Blue-screens in trying to detect the ACPI BIOS. At this point, the stop message tells me I can start Windows installation and press F7 to avoid the ACPI control. I tried and managed to get Windows 2000 is installed, but power management has failed. The laptop detects even when he was running on battery - not very helpful!

  I tried updating to the latest version of the BIOS (1.60), but Windows 2000 install always fails.

  Moreover, most of the hardware works under Windows 2000, even if installers on the Toshiba site claim to be for XP.

  Is anyone know how make ACPI work properly on this laptop under Windows 2000?

  Cheers, Giles.

  Hello

  Uh, you're trying to install what? Why?

  Why are you trying to install an NT-based OS that is as old as your machine, what is VISTA compatible (which doesn't mean you should install Vista :)))
  Gets an old, incompatible and not supported operating system which makes the machine slow (because the socket driver is really not good) and does not work properly.

  If you need advice: remove it and work with a newer operating system. And if you need the computer as a SERVER, use Linux. But avoid the Win2000. :)

  Welcome them

• Tecra M2 mapping of the keyboard in Windows 2000

  Hi all

  I have a Tecra M2 on which the WinXP was removed and replaced by a new installation of Windows 2000 SP4 (I prefer not to go into detail as to why this took place).

  My problem is that the keyboard mapping is not correct under Win2000, for example if I press shift + 2 I get a @ and not a '. '. The problem exists with almost all the characters of Maj (' |,-,', ~,', ', @, #, etc..).

  Note that I don't use any software that remaps the keyboard.

  Does anyone know how this bee fixed?

  Thank you very much

  Hello

  I have the same problem on my laptop, but I don't have time to look at the problem until I saw this ad...

  Here is the answer for Windows XP, I guess it's the same for Windows 2000, because the systems are similar.

  Under start/setting/control panel, you will find the icon "regional and Language Options". Double click it and you get a new window. Select the folder "Language" then "Details". A new Windows pop up and from there you can select 'Add' services 'install '. Select your language to enter the menu drop-down, then click on 'OK '. Ensure that the value "default input language" is correct, then click 'OK' and click on 'OK '.

  Normally, the operating system needs to restart to set the hardware!

  Your keyboard should work correctly after the next system startup.

  Let me know if it works for you

  Rusty

• Stack of BT 5.10.02 running on Windows 2000

  Hello

  I am facing some problems with the battery of Toshiba Bluetooth on Windows 2000 Service Pack 4 to the hands-free function.

  Version of BT stack that I use is 5.10.02.

  It takes at least 2-3 attempts to match or headphones.
  Restarting the machine on the headset is disconnected, it conforms.
  A few times the BT manager stops responding when matching.

  Is it any patch to fix this problem?

  I tried to install the hot - fix Q818801, but it has not solved the problem.

  Hello

  can I ask you which machine should you? Is this pile of BT that you´ve downloaded especially for Windows 2000?

  It would be interesting since BT under Win2000 stuff is such a question...

  Please, give more information about your computer, configuration, etc. + the exact helmet device which you want to connect to your machine.

  THX

• Windows 2000 Setup error

  Hi, I have a Toshiba Tecra 730cdt I'm trying to install windows 2000. When I get to a point in the proses

  It stops and gives me the following error message:

  Fatal error:

  Setup could not retrieve the ID of the product due to the following error:

  RegQueryValueEx returned for invalid data [type = 1], or the nest has an invalid length [length = 8].

  ***

  Fatal error:

  Setup could not retrieve the Identification of the system product that you are installing

  Support for windows 2000 may be damaged

  Please contacct Product Support

  ***

  Once the system is rebooted, it shows a screen saying that the installation has been restarted and enters this loop hole

  I was wondering how to fix this error because I used a different windows 2000 disk and got THE SAME ERROR

  ANY help would be appreciated!

  How to modify the Config.sys and Autoexec.bat files

  http://support.Microsoft.com/kb/232558/en-us

• A problem on Windows 2000 Pro SP4

  When I go to certain sites like facebook for example a bsod appears and restart windows and I don't know why? Help, please
  The following data in the bsod dump files:

  ==================================================
  Dump file: Mini010414 - 01.dmp
  Crash time: 04/01/2014-20:53:34
  Bug Check String: BAD_POOL_CALLER
  Bug check code: 0x000000c2
  Parameter 1: 0 x 00000007
  Parameter 2: 0x00000b8a
  Parameter 3: 0xe2ca9100
  Parameter 4: 0xe2ca9108
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 4 b 16
  Description of the file: multi-user Win32 Driver
  Product name: Microsoft (r) Windows (R) 2000 operating system
  Company: Microsoft Corporation
  File version: 5.00.2195.6708
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 6b4e2
  Stack address 1: ntoskrnl.exe + 6b2e2
  Stack address 2: win32k.sys + 110146
  Battery 3 address: win32k.sys + 11d8bd
  Computer name:
  Full path: C:\WINNT\Minidump\Mini010414-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2195
  Size of the dump file: 65 536
  Dump of file time: 04/01/2014 20:54:19
  ==================================================

  This is another:

  ==================================================
  Dump file: Mini010414 - 02.dmp
  Crash time: 04/01/2014 20:58:49
  Bug Check String: BAD_POOL_CALLER
  Bug check code: 0x000000c2
  Parameter 1: 0 x 00000007
  Parameter 2: 0x00000b8a
  Parameter 3: 0xe12b3460
  Parameter 4: 0xe12b3468
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 4 b 16
  Description of the file: multi-user Win32 Driver
  Product name: Microsoft (r) Windows (R) 2000 operating system
  Company: Microsoft Corporation
  File version: 5.00.2195.6708
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 6b4e2
  Stack address 1: ntoskrnl.exe + 6b2e2
  Stack address 2: win32k.sys + 110146
  Battery 3 address: win32k.sys + 11d8bd
  Computer name:
  Full path: C:\WINNT\Minidump\Mini010414-02.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2195
  Size of the dump file: 65 536
  Dump of file time: 04/01/2014 20:59:36
  ==================================================

  and thanks in advance for the help.

  I installed windows 2000 SP4 update rollup1 and that fixed it.

• Run the than SP1 2012 LabVIEW VI user on Windows 2000 machines created

  The VI working on (on Windows XP) will have to be implemented on computers different 4: 3 with Windows XP SP3 and 1 with Windows 2000 SP4. This is a new program for us, so we bought LabVIEW 2012 SP1. This version of labview works on Windows XP, Vista, 7, & 8. The corresponding runtime engine runs on Windows XP, Vista, 7 &. As you can see, Windows 2000 is not listed here. I tried to build in an .exe file, but there are corresponding RTE. Is it possible for me to be able to run my VI on the Windows 2000 computer? (Of course, the upgrade of the OS would be a solution, but I would like to avoid this, if possible).

  [I've been messing around with runtimes and the most recent version that could install has TENS of LabVIEW 2009 (no SP1) on the computer running Windows 2000, if that helps at all.]

  Dennis_Knutson wrote:
  Build an exe for 2009 would require you to have a copy of LabVIEW 2009, end. I don't know if your 2012 license would even allow that and if you use some of the features, you will not be able to do the conversion down.

  If you have a license for a version of LabVIEW, you can have every (Older) version installed as well.  You need an active SSP to upgrade well!

  All the new features migrate at least 8.0 (you will get a bunch of warnings in guard and perhaps a very ugly code).

  I would try to avoid support queues (or config file functions) over the limit of 8, 6-2009.  You may see some unexpected changes and prefomace hits.

• UPDATE ROLLUP 1 FOR WINDOWS 2000 (KB891861

  When I download and install an update (Update Rollup 1 for Windows 2000 Service Pack 4 (KB891861), my computer won't reboot (reboot), it keeps restart and windows will not start.) Help?

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General

  Above is the link to the General Windows 2000 discussion group.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.windows_update&cat=en_us_59ae21ed-54d8-490d-8BF3-8741cee780a4&lang=en&CR=us

  And the group discussion Windows 2000 update.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• How can I remove Windows 2000 and let my only XP?

  How can I remove Windows 2000 Pro and let my only XP?

  I was given a computer from a friend.  It had Windows 2000 Pro top.  I installed my copy of XP on the computer, but do not delete the 2000 Pro here at this time.  Now, I would remove the 2000 and have no idea how to do it.  I'm fairly intelligent, but am a computer redhead.  In other words, if we say how to do it, I can.  I just don't know how to do it without help.

  If someone wouldn't mind helping me, I'd appreciate it.

  2000 has been upgraded to xp or xp resides in a separate partition. If the

  1 has taken place, open Add/Remove Programs, remove 2000, once in, open disk

  Cleanup utility, look for more button options, search for remove all but the last restore, point

  Run disk Cleanup, restarting the pc. If xp is on a separate partition, boot the pc with the xp installation

  CD, press r for recovery to the menu console, select 1 for press C: entered password,.

  type: DiskPart in DiskPart, delete the 2000 partition, create one, press the ESC key. Type: EXIT

  Go back to xp, in run, type: diskmgmt.msc in msc, R.click on the new free space.

  Select 'format' follow the wizard, use the default settings. Once her thru, L.click to this topic

  go to the actions, all, select 'Activate' exit msc.

• I installed windows 2000 on a virtual machine on a different computer than windows xp.

  I installed Windows 2000 on a virtual machine to another Windows XP computer. I'm under the it on my new computer with Windows xp. I get the icon in the bar lower right spots showing an internet connection but no Internet Explorer or Firefox will have access to the internet? In the Device Manager on Windows 2000, it shows a map network intel but on the computer Windows Xp host computer and in the "settings" on the Windows 2000 installation it shows my Realtek card. Is the adapter intel a virtual card? I tried to uninstall the Intel card and then install the Realtek but Windows 2000 installation does not see the Realtek card. On a restart, the Intel card is reinstalled.
  Am I a fight lost because I did the first Windows 2000 install on another computer in Windows XP?

  Hi MrRobHill1965,

  Given that the problem is related to the virtual machine, I suggest that you post your question on the forums of Virtual PC listed below.

  Windows Virtual PC and XP Mode Forum

• Restart Windows Server 2003

  Unable to restart Windows Server 2003 remotely. Must physically press F1 to start Windows. How can this be avoided?

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you! Carey Frisch

• Problem with Wireless G PCI adapter (WMP54GS-RM) and Windows 2000

  I'm having problems to install the above wireless adapter in a desktop computer HP EVO D510 running Windows 2000 Pro.

  As stated, I launched the installer using the supplied CD and reached the point where the PC asks permission to stop so that the adapter can be inserted into the PCI slot. I grant permission, and after stops in the PC, I install the card. When the PC restarts, the installation software does not reopen. This is reflected by the unit Mgr reports that I have a working driver, but I don't have an Internet connection. I discovered looking at the Bishop of events that the service that accompanies this adapter is unable to start.  When I manually try to start, told me that Windows 'failed to start WMP54GSSVC service on Local computer. Error 127. The specified procedure could not be found. "I suspect that this occurs because the installation program does not end after the reboot, but do not know that for some.

  I would add that I downloaded the latest driver and it seems to be identical to what I have on CD. For the heck of it, I uninstalled the software I loaded from the CD and used the software on the web only to get the same result.

  I'm close to throwing in the towel. I have ideas that could prevent me from giving up.

  Ron

  Windows 2000 has all updates including Service Pack 4. The adapter was properly seeded.

  The problem turns out to be not not one but two things.

  Outpost Firewall is configured to allow the launch software correctly, but even with this, the executable associated with the system tray Monitor would not and still will not work as a service Windows in W2K. He didn't even start a service manually without triggering the error message (see my first post). I discovered, however, that the executable will run - not as a service but normally - if run during startup.  After experimenting with launch from a batch file added to my startup folder, I finally decided to use WinPatrol to launch the program as the latest app loaded during startup.  He loads evenly using of workaround and gets me to the internet.

• My windows vista computer has the look of windows 2000?

  Hello.

  I have problems with my windows programs.
  I fell asleep last night in front of my computer, and when I woke up, I found that most of my windows programs like version of windows 2000
  Microsoft word, excel and paint that old look and my scroll bar also resembles those of windows 2000
  He also accused many or refuses to answer when I want to attach files in an email, or open a word document.
  Could someone please tell me how to solve this problem, because I don't know what to do...
  Thanks for the help!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Don't restart Windows 7, no Internet, no noise, no aero theme, etc.

  I was playing solo starcraft when my computer froze (windows 7). When I rebooted, none of the themes color charge (just a gray bar that resembles windows 2000), the sound icon has a red X and the sound does not work, there is no connection internet, and restoration of the system, said it doesn't seem to work on my machine. I tried to restart, operation of scanners malware in safe mode, creating a new user account and chkdsk found nothing. What could be the problem?

  Hello

  Method 1: (for cause of aero)

  Run the troubleshooter for Aero and check if that helps: http://windows.microsoft.com/en-us/windows7/Open-the-Aero-troubleshooter

  Method 2: (For his number)

  Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  Method 3: (for no internet)

  Follow the steps in this link and see if that solves the problem: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters