Awaiting customer action

Similar Questions

• WHAT CUSTOMER ACTION PENDING AVERAGE AND ACTUAL CAPTURES DATE?

  Its ALMOST A WEEK SINCE MY SOUND WAS SAYING awaiting CUSTOMER ACTION? AND ITS BEEN 2 WEEKS SINCE I SENT MY LAPTOP. AT FIRST MY DEILVERY ESTIMATE WAS 15/11/13, AND NOW IT SHOWS NO MORE. PRESS THE BUTTON, THEY SAID REAL PICK UP DATE IS 11/15/13. SOMEONE HELP PLEASE THIS FACT MAKES NO SENSE! IF SHE DEILVERD I DON'T UNDERSTAND! Someone please HELP OR please email me at [personal information]

  Thank you for visiting the Forums from HP Support. I'm sorry but is a community of peer-to-peer HP customers and not a place to contact HP directly. Most of the users here is consumers like yourself that offer solutions because they like to help others and HP employees that you see are here on their own abilities and not representing does not society.

  If you have additional or direct comments for HP on their products or services or questions on the repair, you can use the link below for contact information.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you have other questions and concerns about the use of the forum, please do not hesitate to send me a private message.

• I can't watch the custom action

  I use Microsoft Dynamics Nav 2015.When I create my custom action, I can listen to samples, but when I run the page it desapears.

  Hello

  Your Question is beyond the scope of this community.

  Repost in the Microsoft Dynamics community.

  https://community.dynamics.com/f

  See you soon.

• How to fix "error 2738... could not access VBScript runtime for custom action' tries to apply the update to my service of Incredimail.

  How to solve the following problem found while trying to download an upgrade of my Service of Incredimail.

  "Error 2738...". could not access VBScript runtime for custom action"

  The most likely cause is the antivirus bloocking the script.

  Check your AV settings (AV is?)

• could not access vb run time for custom action script

  I have windows vista Home premium installed on a HP Pavilion laptop dv6-1030us entertainmeny. I am trying to install a mobile usb broadband telstra for internet connection on my lap top. the installation process starts, but is abandoned with a message ' could not access Vbscript run time custom action. I looked upward for solution of line and followed who asked to change the registry for vbscript.dll. I followed the instructions but the problem has not been resolved. The next set of instructions was to permanently remove some keys: current user/software/class/CLISD which I tried, but ended with an error.

  Hello

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/0ffd532e-a3e0-4738-8601-38c46e69e238

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Problem of uninstalling with the error 'could not access VBScript Runtime for custom action'

  I'm having a problem uninstall a program. I'm getting repeatedly blocked in error: "could not access VBScript Runtime for custom action.  That means this error in uninstall a program? Would appreciate a fix for this. The program is called Soluto.  Thank you.

  P.S. I tried as admin and type regsvr32 vbscript.dll then regsvr32 jscript.dll in the command prompt.

  As well as their registration as an administrator, you may need to remove the entries for them in HKEY_CURRENT_USER.

  See:

  http://blogs.msdn.com/b/astebner/archive/2007/06/07/3151752.aspx

  Also, make sure that your antivirus software is not blocking scripts.

• error 2738. Unable to access VBScripts executing a custom action. -Trying to upgrade my IncrediMail

  When you try to upgrade my IncrediMail this message appears:

  Error 2738. Could not access VBScript Runtime for custom action.

  Hi ElaineLanglois,

  I suggest you follow the method below and check if it helps.

  This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation.

  You can try the following steps if you have not tried these steps in high mode.

  The VBScript engine may be quickly entered as follows:

  1. run as administrator command prompt

  (a) go to Start Menu

  (b) under all programs, go to Accessories.

  (c) right-click on command prompt and select run as administrator

  2. If you use the 32-bit version of Windows:

  Type cd %windir%\system32 in the command prompt and press ENTER.

  If you are using the 64 bit version of Windows:

  Type cd %windir%\syswow64 . in the command prompt and press ENTER.

  3. type regsvr32 vbscript.dll in the command prompt and press ENTER.

  4. type regsvr32 jscript.dll in the command prompt and press ENTER.

  5 restart your computer and check.

  I hope this helps.

• Error message saying "error 2738. Could not access VBScript Runtime for custom action'.

  I am trying to download the software Sky Player and get an error message saying "error 2738. Could not access VBScript Runtime for custom action'.  I have contacted sky and went through the procedure, they have recommended, but nothing helped.  Can anyone help please.

  Here is an article on this exact error message that can help solve the problem:http://www.jakeludington.com/windows_7/20091115_error_2738_could_not_access_vbscript_run_time_for_custom_action.html.

  Here is another article which basically says the same thing, although procedures vary slightly:http://www.nitropdf.com/kb/article.aspx?id=10106&cNode=3D8W4P.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• custom action builds without error

  All,

  I am trying to create a custom action where it administers all events/alarms to another server for processing.  First, create a rule that implements the custom action, where the action is supposed to be triggered on every event/alarm.  The custom action will then take the event and move on to another server via a raw socket and made a simple handshake with sha1 base 64.  I welcomed for groovy and java during the construction of the custom action and it builds just fine without error.  However, when I install cartridge and turn on the rule, the server receives nothing and I do not see the log entries.

  Build.XML I had to ad a taskdef to groovyc and add a different path to the jar file.  I enclose my Ant and source files.  Any help to find where I'm wrong well would be apprieciated.  I think that the problem is around the keyword implents and how I created that, but I'm not sure.

  Thanks for any help!

  Can you please post screenshots of this rule?

  There is a rule of Foglight making snmp with impatience that sends snmp traps to another http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/5567.event-driven-rules-snmp-forwardserver.  I don't know how your rule is constructed, but the simplest can be copy that snmp before rule, rename it simply to put your action and see if it works. At least the starting point will be a tested rule that works in several sites.

  Golan

• Error 2738 - could not access VBScript Runtime for custom action during the INSTALLATION of broadband dongle by distribution VODAFONE K3565 rev2. ON WINDOWS 7 PREMIUM

  Whenever I try to install a dongle broadband PAYG Vodafone K3565 rev2, I get an error message; -error 2738 - could not access VBScript Runtime for custom action. I am running Windows 7 Home Premium on a Samsung R522 again.
  I found that I got the same error message when I tried to install INCREDIMAIL on the same computer laptop.

  On the vodafone website, I found a resolution the resolution I found was;

  1. run command prompt as administrator
  1.1 Start Menu-> all programs-> Accessories
  1.2 right-click on command prompt and select run as administrator of
  
  2. If you are using the 32-bit version of Windows:
  Type cd %windir%\system32 in the command prompt and press ENTER.

  If you are using the 64 bit version of Windows:
  Type cd %windir%\syswow64 in the command prompt and press ENTER.

  3. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.
  

  When I tried this, I got a message that this had been done but I tried to install the programs and even once, they both failed and I got the same error as before.
  
  Can anyone help?

  Well... It has been a week. I know too much now.

  ATTENTION: This field is very complicated AND there are too many incorrect analyses out there.

  The problem for me is (FOCUSED) that the current user HK had entires THAT SHOULDN'T BE!

  The computer settings are found under the Local Machine of HK. HKLM must be correct.

  Procedure: REMOVE all entries in HKCU. Correct path the InprocServer32 value.

  My specific (2738) error occurred trying to find "vbscript.dll" (aka "\{B54F3741-5B07-11cf-A4B0-00AA004A55E8"})

  Some antivirus software redirects requests for certain things by herself (aka 'diversion'). If the

  InprocServer32 is EMPTY (in HKCU - for me). All of the solution has been to remove the HKCU entries.

  Another little attention is: (for example) vbscript.dll has several references (app, authorization, RegExp)

  so be on the lookout for the 2 and 3, as well.

  \{B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  \{B54F3742-5B07-11CF-A4B0-00AA004A55E8}

  \{B54F3743-5B07-11CF-A4B0-00AA004A55E8}

  I removed the entries in HKCU. Run the error code again. (Mine = .msi)

  This information is redundant. Gokul T response (upstairs) was correct. It does not sink into my head when I read it. But this thread was open the door to the solution for me.

  Thank you...

• When installing or uninstalling the software get error 2378 - could not access VBScript Runtime for custom action

  I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.

  I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.

  I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.

  I have registered the VBScript engine in the folder it is installed, said successful but still does not work.

  I tried with run as administrator of the command-line also.

  It is a Dell laptop with Windows 7 Home Premium 64 - bit.

  Any suggestion would be appreciated.

  Thank you

  Oldestman

  Hello

  What operating system is installed on your computer?

  Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.

  Delete the registry following key then save the VBScript code and check if that helps:

  Step 1:  If you have a 64-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f

  If you have a 32-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Step 2: Register VBScript by following the steps below:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the following command and press ENTER:

  If you are using32 bit version of Windows, and then run the following command:

  regsvr32 vbscript.dll

  If you are using64 bit version of Windows, and then run the following commands:

  %windir%\syswow64 CD

  regsvr32 vbscript.dll

  d. after the command is executed successfully, try to install

  Method 2: Diagnose and correct program installation and uninstallation of the problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Lost a Custom Action - CS6

  I use the same custom action file to insert my signature in pictures for more than two years now.  Whenever I started Photoshop, it's here.  I guess I should have saved it.  However, following a recent BSOD episode where Photoshop reset itself to its default state, my custom action is no longer there.

  I looked in C:\program files\adobe\Adobe Photoshop CS6 (64 bit) \Presets\Actions and only the stock nine actions are there.  I went to a recent full backup of before the crash and the Actions folder is the same as what I see now.

  Questions: Is my custom action elsewhere in Photoshop?  If Photoshop could see my action for two years, he must be somewhere.  Y at - it somewhere that I can recover from the backup file?

  Thanks for reading and I hope to help.

  Gerry

  If it is everywhere where it would be in the settings folder in the actions of psp file. Since you blue screened, this file can be messed with PS resetting is auto. If you had an older version of PS with the same action, copy this file to psp versions in your current version of PS.

  Photoshop CS6 Photoshop CS6\Adobe C:\Users\[user]\AppData\Roaming\Adobe\Adobe settings

• How to change the step of the custom action?

  Hi, I use Photoshop CC 2015 and I want to change the property of a single step in a custom action. A lot of people through the internet said that if you double-click on a step, you can change the properties. But when I do this, he plays just this step (not all the action, just that step). What is the right way?

  Specifically, I would like to change the properties of this step:

  

  I like to "Select the front layer WITH Make Invisible"

  Now when you choose Select layer front/rear, it ignores the invisible layers. I would like to go to the next layer, even if the layer is invisible. If anyone know the shortcut keyboard for that... then I will not need to change the step!

  
  Thank you!

  Hello, when you double click you can have an option to change if you have something like a fit, with parameters.

  In your case, I think you can fix record this step. First, make a copy of your action, just in case something is wrong and then:

  -first uncheck the check box for all the step after that you want to save again.

  -remove the step you need to register again;

  -Run your action on a single file. It stops at the last stage before the one you need to register again;

  -Click on the Begin record button in the Actions Panel;

  -make your step again with the options you need.

  -Click the button to Stop recording.

  -Check the checkbox for all the steps and action should be ready again.

• I want how to use custom, actions, brushes ets...

  I want how to use custom, actions, brushes ets...

  I put the files here...

  C:\Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets

  When I load model and ets...
  There is nothing in the record...

  What should you do?

  I use Photoshop cc 2015...

  and workign in Photoshop cs6.

  You will need to put the diagrams in the subfolder of the boss, actions in the action etc subfolder.  I thought you just need to know the path to the CC 2015 presets in general.

  Here's my presets folder and all subfolders