WHAT CUSTOMER ACTION PENDING AVERAGE AND ACTUAL CAPTURES DATE?

Similar Questions

• What is the best way and to share data between a server and a Client app?

  Hello

  I'm trying to communicate a Client-Server application.

  In fact, I already have a simple data transfer via TCP/IP. However, I don't know yet, if TCP/IP is the best (and by that I mean, better, faster, safer, etc.)

  How to do.

  What are the cons and Pros between TCP/IP, STM and shared Variable?

  Do you recommend another type of communication in addition to these 3?

  Thank you

  Matt.

  In my view, that a general question cannot have a response says.

  Then, there is no way 'the best' for sharing data between a client and a server app.

  I like to use TCP/IP, but sometimes (when data loss is not critical) I use UPD (quick and dirty).

  I generally avoid shared variables, especially on embedded devices.

  Some other times I have I like to Exchange data in a database...

  A few other times I Exchange data using file...

  Marco

• What VPN Cisco IOS VPN and RADIUS client?

  Hello community,

  My company are trying to set up the remote user VPN for all of our external collaborators to the help of our existing Cisco router and a RADIUS server in Active Directory.

  I did all the AAA config on the router and set up the RADIUS, but I do not know what customer buy Cisco Remote and how to set up.

  Anyone who knows this set upwards or it uses can be me help please we don't lose our money (and my boss time!)?

  Thanks in advance.

  Paul

  Paul,

  AnyConnect lets connect you using IKEv2/IPsec and SSLVPN for IOS network head.

  There are countless examples of configuration.

  Alternatively, some clients of IKEv1/IPsec 3rd party exists and are able to connect, however is those who are not TAC (Cisco) supported. You can check the feature called ezvpn

  M.

• What is the experience of Migration of PMS Data and Scripts of data Migration

  Hi just what is preparation of PMS and Scripts of data Migration Data Migration experience
  Why do we use these in HRMS (EBS)

  PL provide a link to where you got these terms of.

  'PMS Data Migration experience' is not a term EBS - most likely a seller or third expression/tool/software.

  "Data migration" in HRMS (other EBS modules) generally refers to the process of transferring data from a legacy system to the EBS during the process of going live with EBS.

  HTH
  Srini

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Error 2738 could not access VBScript Runtime for custom action

  Well, I have the same problem error 2738 could not access VBScript run time for action custom when I try to install incredimail I just do a restore to factory in the last 2 days I do not even have all yet loaded things back and I came across this problem so here is my contact information and what I tried already :

  I'm running Windows Vista Home Premium Service pack 2 32 bit
  I use Mcafee and installed and after reading just down to you ensure that I uninstalled and ran the cleaner program suggested and she has still not work, I reinstalled and not yet did not work so I've currently uninstalled again and the vacuum again 3 times
  I ran all the advice from the command prompt still does not work
  I tried to delete the registry entry suggested HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}, but he's not here to remove
  I ran this command suggested reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8} and I think that maybe it wasn't a good idea but may not know whether it was or not.
  Then I read in this thread on Mcafee to a registry entry and redirecting somewhere it should not so I went to look at and that's what I found:
  HKEY_CLASSES_ROOT\CLSID\ {B54F3741-5B07-11cf-A4B0-00AA004A55E8} \InprocServer32 - default REGSZ C:\Program Files\Fichiers Files\McAfee\SystemCore\ScriptSn.20110417221023.dll
  and no I have not yet reinstalled McAfee and ran to the 3 times vacuum why is there always a register McAfee entry I followed the path C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll and guess what it's not exist, and yes I looked into the hidden files I even ran a search in all files and it is not anywhere
  I had already run the sfc/scannow once before I deleted the McAfee and it found corrupted files, but said they have been fixed as well, I ran again just to check and this time no errors
  HELP, I am at a loss of what to next in addition to another factory restore which I really really DON'T want to because I have an I had my computer since February 2007 as well as the amount of updates to Vista I need to do well is all together besides the Service Pack 1 and 2 there are more than 300 reviews have even not looked optional and yet if pardon my language is a pain in one @.
  Please can someone HELP!

  Whoo Hoo!

  Someone told me how to change the permissions on the registry key and DUH! I knew how to do this, so I changed the and then changed the key to C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll TO C:\\Windows\\system32\\vbscript.dll
  Restarted checked and then ran the installation for incredimail and IT WORKED!
  Thank God I've been playing with this for 2 days I really doesn't want to have to do another restore of factory which is what I was about to

• When installing or uninstalling the software get error 2378 - could not access VBScript Runtime for custom action

  I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.

  I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.

  I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.

  I have registered the VBScript engine in the folder it is installed, said successful but still does not work.

  I tried with run as administrator of the command-line also.

  It is a Dell laptop with Windows 7 Home Premium 64 - bit.

  Any suggestion would be appreciated.

  Thank you

  Oldestman

  Hello

  What operating system is installed on your computer?

  Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.

  Delete the registry following key then save the VBScript code and check if that helps:

  Step 1:  If you have a 64-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f

  If you have a 32-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Step 2: Register VBScript by following the steps below:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the following command and press ENTER:

  If you are using32 bit version of Windows, and then run the following command:

  regsvr32 vbscript.dll

  If you are using64 bit version of Windows, and then run the following commands:

  %windir%\syswow64 CD

  regsvr32 vbscript.dll

  d. after the command is executed successfully, try to install

  Method 2: Diagnose and correct program installation and uninstallation of the problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Lost a Custom Action - CS6

  I use the same custom action file to insert my signature in pictures for more than two years now.  Whenever I started Photoshop, it's here.  I guess I should have saved it.  However, following a recent BSOD episode where Photoshop reset itself to its default state, my custom action is no longer there.

  I looked in C:\program files\adobe\Adobe Photoshop CS6 (64 bit) \Presets\Actions and only the stock nine actions are there.  I went to a recent full backup of before the crash and the Actions folder is the same as what I see now.

  Questions: Is my custom action elsewhere in Photoshop?  If Photoshop could see my action for two years, he must be somewhere.  Y at - it somewhere that I can recover from the backup file?

  Thanks for reading and I hope to help.

  Gerry

  If it is everywhere where it would be in the settings folder in the actions of psp file. Since you blue screened, this file can be messed with PS resetting is auto. If you had an older version of PS with the same action, copy this file to psp versions in your current version of PS.

  Photoshop CS6 Photoshop CS6\Adobe C:\Users\[user]\AppData\Roaming\Adobe\Adobe settings

• How to change the step of the custom action?

  Hi, I use Photoshop CC 2015 and I want to change the property of a single step in a custom action. A lot of people through the internet said that if you double-click on a step, you can change the properties. But when I do this, he plays just this step (not all the action, just that step). What is the right way?

  Specifically, I would like to change the properties of this step:

  

  I like to "Select the front layer WITH Make Invisible"

  Now when you choose Select layer front/rear, it ignores the invisible layers. I would like to go to the next layer, even if the layer is invisible. If anyone know the shortcut keyboard for that... then I will not need to change the step!

  
  Thank you!

  Hello, when you double click you can have an option to change if you have something like a fit, with parameters.

  In your case, I think you can fix record this step. First, make a copy of your action, just in case something is wrong and then:

  -first uncheck the check box for all the step after that you want to save again.

  -remove the step you need to register again;

  -Run your action on a single file. It stops at the last stage before the one you need to register again;

  -Click on the Begin record button in the Actions Panel;

  -make your step again with the options you need.

  -Click the button to Stop recording.

  -Check the checkbox for all the steps and action should be ready again.

• I want how to use custom, actions, brushes ets...

  I want how to use custom, actions, brushes ets...

  I put the files here...

  C:\Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets

  When I load model and ets...
  There is nothing in the record...

  What should you do?

  I use Photoshop cc 2015...

  and workign in Photoshop cs6.

  You will need to put the diagrams in the subfolder of the boss, actions in the action etc subfolder.  I thought you just need to know the path to the CC 2015 presets in general.

  Here's my presets folder and all subfolders

  

• Toggle the Custom Actions

  Hello

  I read questions similar to this topic, but still can't find the right way to do it.

  It's actually very simple.  I want to set the Custom Actions to the Actions menu for a host.

  I want to be able to turn them off, if the config.ipmii is set (! = null).

  I found in the samples that you can add a conditional property to the actionSpec

  config.template < conditionalProperty > < / conditionalProperty >

  The config.template is a Boolean value, then returns the expected true or false.  Easy.

  But I want to check if the config.ipmi (object) is null.  I tried to write the statement:

  < conditionalProperty >! config.IPMI < conditionalProperty >

  or

  config.IPMI! = null < conditionalProperty > < / conditionalProperty >

  but both are ignored.  Can someone tell me please the syntax I use for this?

  Thank you very much

  Cathy

  My bad, the operator of negation has been added in 5.5 SDK is available this month.

  If you must use 5.1 for your plugin workaround is to use a dummy property name, such as configIpmiNotDefined and write a PropertyProviderAdapter this property of handling and returning a value true or false, after reading the config.ipmi of a host. The Web Client Platform will call adapter trying to find the value of configIpmiNotDefined.

  See samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java.java for an example of a property provider using vSphere SDK for Web Services to access data of vSphere.  In your case, the target type will be "HostSystem' instead of 'VirtualMachine '.

• signal average and relaxation

  I know how to program to acquire the signal. But I donot know average and raise my signal as a work of the oscilloscope? What do I have to use "average dc - rms VI" to calculate the rms dc values and/or a waveform of input on average?  In oscilliscope, I can choose average 16,32, 64... 512. how to achieve here? There is also a filter of bandwidth in the scope.

  The trigger is nothing but looking for a crossing of a certain level.  You can use a simple top or a less than to find that.  On average, as a scope, you must acquire the signal several times.  You can then perform the average for each data point in a loop FOR.

• Awaiting customer action

  Ok. Its been 2 weeks that I have sent my laptop for them to fix it. I had a warranty. Now my said status of customer waiting. Awaiting customer Action even mean? The deilvery estimate was today but it isn't here. Why? What it means? Why is it so slow HP?

  Don't know what "awaiting customer Action" refers to. I'll try to find out. Can someone contact you via PM. To check your PM Inbox you must be logged in, then click on the small icon at the top right of the page.

• What are the abbreviations 'MXP' and 'FXP' position?

  What are the abbreviations 'MXP' and 'FXP' position? I understand they are a representation of the quality of the registration with respect to the data by a single image. But I can't find anywhere what the abbreviations mean. Thank you.

  I don't think that the actual letters have a specific word attached or as an abbreviation.  They ae a few letters.

  Memory capacity	MXP (approx. 24 Mbps)	FXP (approx. 17Mbps)	XP +. (approx. 12 Mbps)	SP (approx. 7Mbps)	LP (approx. 5 Mbps)
  64GB	5 hours 55 min.	8 hours 20 min.	11 hours 30 min.	19 hours 10 min.	24 hours 30 min.

  I think that in the beginning LP was to play along, but I don't know about you.

• could not access vb run time for custom action script

  I have windows vista Home premium installed on a HP Pavilion laptop dv6-1030us entertainmeny. I am trying to install a mobile usb broadband telstra for internet connection on my lap top. the installation process starts, but is abandoned with a message ' could not access Vbscript run time custom action. I looked upward for solution of line and followed who asked to change the registry for vbscript.dll. I followed the instructions but the problem has not been resolved. The next set of instructions was to permanently remove some keys: current user/software/class/CLISD which I tried, but ended with an error.

  Hello

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/0ffd532e-a3e0-4738-8601-38c46e69e238