B209a Solution Center has NO text using Windows XP

Similar Questions

• OfficeJet J4680: HP Solution Center has stopped working with Windows 10

  From today, after the last version 10 of Windows Update to the HP Solution Center software won't start/open.  After clicking to open, there is a beep and nothing.  No dialogue error or indication that something does not, but the program does not start.

  He had worked all the way up through yesterday with the latest versions of the Solution Center and Windows 10 installed.  The only change was an update today which says that it was just an update to the flash player security.

  I uninstalled and reinstalled twice, checked to make sure that my private network settings were OK, all to nothing done.  I need it to scan documents.

  Anyone with ideas?

  There is a problem with the last Windows security update.  It disables some flash programs, including the HP Solutions Center uses to load.

  Here's a solution:

  Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  Click the appropriate option.

  Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  Click on uninstall and work through all the guests.

  Once uninstalled, the HP Solution Center will work.

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• HP Solution Center has stopped working

  Product model: CB683A
  Product name: HP Deskjet F2280 all-in-One Printer
  PrinterSerial number: CN88E4S2GX

  Windows XP SP3

  This has been working well up until now. Now when I click on the HP Solution Center nothing happens. In Windows Task manager it is a process present hpqdirec.exe, but nothing appears on one of my two monitors. I left HP update to update all the software, but it made no difference.

  Following the suggestion of the FAQ, I went to Windows Paint and did a scan 'from scanner or camera"and access to the printer and scanned ok.

  So why this request is no longer appear?

  
  

  If you are able to analyze correctly, you will have a problem with Adobe Flash.  Flash is required to operate the HP Solution Center.  There are more details in this thread if you are interested:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-Solution-Center-won-t-load/TD-p/3821

  But to summarize, please try to uninstall and reinstall Adobe flash player via Internet Explorer.  You can get Adobe flash player here:

  http://get.Adobe.com/flashplayer/otherversions/

  Troy

• My j3680 solution Center has stopped working. I can print and fax manually. I downloaded the full

  My j3680 solution Center has stopped working. I am able to print and fax manually but can't scan. My system is windows 7.

  The 3680 is an officejet all-in-one.

  Hi mahroch,

  The first thing to do to solve this problem would be to run printing HP and doctor Scan. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the following link for more information on downloading, installing and running this tool:

  http://goo.GL/SGZxs

  Let me know if this solves the problem, and if not, what the tool provides.

• After the software update HP Solution Center has only 3 activities

  After update the software and drivers for my HP Photosmart Premium C309A for my operating system of Windows 10, the House HP Solution Center has only 3 activities: image Scan, scan a Document and send a fax.

  Hi @jwilliamp and welcome to the community of HP!

  The Solution Center behave differently on Windows 10, somethings such as printing of CD are no longer supported in the new OS.

  Other CD print is there anything else that you see as missing that I can help you to find a workaround for? If you try to print on CD, you will need to find a 3rd party software that allows it.

  I'm sure this isn't the answer you were hoping for, but if it has solved at least your request, please click on the I accept as Solution button below to report your post as solved.

  If there is anything else I can help you with please do not forget to post again, I'll look for an answer.

  Thank you.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install access on disk solutions Center. have new hp omni200 windows 7

  Hello. I just bought a 200 HPOmni PC. Previously, I had a HP Pavillion A630N. A year or two ago I bought an Officejet J6480. I was able to scan pages directly into my computer, now I can't. I put in the installation disk to get the hp Solution Center, but I get a message that it's not compatible with my operating system. I checked the section update from the HP Web site and downloaded a bunch of things for updates, but none of whom has been central to solution. Can you please help me find it and so I have the scan of the computer capabilityy again? Thanks in advance for any help you can give me

  The full download recommended for Windows 7 is available at HP hee.  If the download in this link button does not work, use this link.

  If you are connected by USB you unplug the printer from the computer cable before installing the driver.  Do not reconnect the printer until you are prompted to by the installer.

• My PC communicates wirelessly with my C309a HP, but Hp solution Center has stopped working.

  My PC (Dell XPS 9000) communicates with my C309a HP wireless printing, but the Hp Center solution has stopped working. If I should not be able to use all functions wireless?

  I get a message error "HP Solution Center can work because your device installation is not complete. Please connect the usb cable or re-run Setup from the instattation for a network installation CD. "When I put the installation disc to remedy the problem, it tells me that my current software is the last, while it will not be updated. When I go to the center of update, it tells me I have the latest version of the software.

  Hello

  Try these:

  Click the icon to the Start Menu > programs > HP > HP Photosmart c309a > add a device

  With this, it will find the wireless printer and reconfigure the parameters; Just follow the guests. After completion, try to open the HP Solution Center.

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• HP Solution Center: HP Solution Center has stopped working

  I have a HP Officejet 4500 all in one printer, copier, scanner, fax machine.  When I first added the printer to my HP touch computer, everything was fine.  After that I have upgraded to Windows 10, things are complicated.  I used the HP Solution Center software for my scanner.  It worked yesterday, but does not work today.  I uninstalled the software and reinstalled, but now the scanner part does not appear in my devices and Solution Center still does not work.  I can scan from the buttons on the front of the machine, but I don't get the opportunity to change it before the scan is saved.  More embarrassing, and I hope that I don't have to buy a printer that is compatible Windows 10.  No simple solution out there?  I saw some other suggestions for similar problems, and they require a list of steps that I'm not comfortable trying on my own.

  Found the solution.  See that the other thread on this forum titled "Center of Solution does not work since the upgrade to Windows 10.  You should go to Windows Update and uninstall the security update 29/12/15, Microsoft pushed the 29/12.  Solution Center and then charge again.

• Solution Center: Solution Center has stopped working

  I use Solution Center several times a week to scan documents. Today the product would not be open to the top. When I tried, the main screen would show a moment and then disappear and the computer would "Ding". I uninstalled the product and reinstalled from the web. Installation seems to be okay and my HP Solution Center icon appeared. However when I try to start the application the computer 'Bumps' and nothing happens.  As a side note, I was on Windows 10 for a few months.

  Hello

  Thank you for using the forum.

  Try this solution:

  1. Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.
  1. Click the appropriate option.
  1. Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.
  1. Click on Uninstall and work through all prompts.
  1. Once uninstalled, the HP Solution Center should work.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Office Jet 4500: HP Solution Center has stopped working, why?

  After the upgrade of Windows 10, my Officejet 4500 works perfectly, until recently (Christmas break) and now the "Solution stay" does NOT, why?

  Have uninstalled, reinstalled, tried HP Print & Scan doctor, but it still does NOT work!

  Any ideas?

  Hello

  Thank you for using the forum.

  Try this solution:

  1. Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  2. click on the option.

  3. Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  4. click on uninstall and work through all the guests.

  5. Once uninstalled, the HP Solution Center should work.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• C7283 all-in - One Solution Center has disappeared, and now cannot parse.

  My C7283 all-in-one worked many years. Out of the blue, the HP Solution Center disappeared & now I cannot SCAN. I am running Windows 7. The origonal disk rejects the installation. I downloaded the latest version of the software. At the end of installation "Fatal Error" occurs. I disabled my antivirus software during installation. I've tried various places of payware online support & always get sent to HP customer, but just go in circles. I tried HP by phone & no luck. I have uninstalled & reinstalled several times with the same results.

  Hello 1fisheagle

  Follow the instructions below to "clean" or "scrub" your printer drivers. I had the same error before and after these steps it is solved for me. (results may vary) The second paragraph usually gives better results that brush instructions tend to be newer than this delivered on CD.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  Adobe Flash Player
  9 download drivers and full software features
  Photosmart C7283 full of software features (Windows 7)
  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  Adobe Flash Player
  9 download drivers and full software features
  Photosmart C7283 full of software features (Windows 7)
  10. run the download to reinstall the printer

• HP Solution Center Software - Office Jet 6700 (windows 7 and windows 8)

  Hello

  My sister and MOM had bought the Office Jet 6700 711.

  My sister's computer is running windows 8 64-bit.  I installed the complete software driver and hp solution center software is not included.  I have search the forum for resolutions and tried to download the driver from hp again and received the same results.

  With what is included with the current and complete driver for the Office Jet 6700 711n, you are able to create new analysis of the profiles of short cut, but you cannot update the printer with custom shortcut profile.

  I call support and got a person in the Philippines under the name of Régine.  I spent 45 minutes on the phone telling him what it was.  Since she was not able to solve the problem, I asked to speak to an engineer to see if the question could be put together.  She told me that she would have some call me within two hours.  I spoke to the hp representative on 21/07/2013.  From this announcement, I have not heard of hp.  It's very sad.

  Since my sister requires no custom scan profiles, she decides to keep the printer.  But my mom is in real estate and it scans many documents and must be able to create the custom scan profile shortcuts on the printer, so that the final pdf file gets not so great.  Due the fact that I have not heard of hp, I suggested that we go back to the printer.  Today, we returned the printer to Costco.

  But, I would get a solution for my sister.  Any ideas?  I highly doubt that hp will remind me.

  Myself, I usually can understand that because I work as a 2nd layer support analyst for a major software company.  If I told a customer that I would call them back within a certain time, I would.

  I know that the service request was probably shut down so that a survey was sent not.

  Thank you

  Hello ressa.

  You're right, that center of Solution is not included with the new printers. HP has completely changed the software program. You are also right in your statement on the creation and registration of shortcuts "scan" with the software. However, the Panel before 'scan' options cannot be changed as old printers. I hope this helps you understand.