Back to BIOS crackd

Similar Questions

• BACK-flashable BIOS for Sony Vaio VPCEB2AFD (PCG - 71311L) and Miss firmware 0.0.0.0

  I have a laptop Sony PCG - 71311L (VPCEB2AFD) died, it stops a few seconds after the start because of some missing BIOS files I think. I wonder if there is a site where I can download a BIOS that I can Flash BACK. Those appearing on the Sony website , I hear cannot be flashed BACK, I tried, and of course, I get an error. Another thing; my BIOS reports the following:

  BIOS version: R0300Y8
  THIS Version: K0300Y8
  ME Version: 0.0.0.0

  Can ME lack firmware be the culprit? In the few seconds after posting before his stop, I get this error: "ME Firmware Update Failed. Please try again. "If there is something that someone here can suggest that I try, I'll be happy to hear it. Thank you.

  PS: a few months ago my laptop fan started to spin so fast and the laptopwould autoshut himself down. I checked the Sony Web site and found the new BIOS (R0300Y8) who promised to "regulation by better fan", that I installed it according to the instructions in the link. but after installing my laptop started to close less than a minute after I turned it on.

  
  

• How do I back up or reinstall a previous bios?

  HP Compaq NC8430

  Windows 7 Ultimate

  Of blue screen memory dump

  I've updated the bios from 68yvd worm f.oc 01/08/06

  I need forms to roll back my bios. After update, the laptop stops indescriminately. As it overheats and stops. Windows 7 trying to recover, but the laptop won't stay down long enough for recovery to occure. Updated the original BIOS, that's what has caused this, so I just need help roll back.

  Hello

  You can find the new not very good following.

  Unfortunately, because of the generation of your laptop, it will be difficult. You're probably thinking about portable ncurrent UEFI environment. There is no for your laptop.

  I don't see Windows 7 support for your laptop available on the server support portal Compaq\HP.

  When such a situation occurs that it is easier to remove the CMOS chip and install one that has the desired programmed BIOS. If you have the technical ability and an air station hot available solder\desoldering you can do it yourself. Which can be easily done by a BIOS recovery service. You provide the leadership BIOS and CMOS chip in most of the cases, with your laptop. You can search online to see if it is available on site for you. You can find the cost is greater than the value of currwent of your laptop and decide it's time to replace it.

  Best regards

  ERICO

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• Tecra S1 disk USB 2.0 external BACK

  I use Norton Ghost 2004 with an external drive USB 2.0 for backup.
  External drive works very well BACK in BIOS 2.00

  External drive is not recognized back in the BIOS 2.1, 2.2 and 2.3.

  Is there a solution?

  Hello

  have you checked that the USB Legacy mode is enabled in the BIOS?

  BR

  Tom

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• Satellite L50 - B - the search for old BIOS

  I recently put to update the BIOS in my laptop L50 - B - 17 c version 1.70 and it turns out the language of the specific characters are not correctly mapped in the keyboard (this is OS independent), so I would go back to the previous version of BIOS, but there is no other version of the download page :(

  Do you know if I can find somewhere another Alumni BIOS, or maybe that you have backed up BIOS before 1.70?

  Thanks in advance.

  The BIOS backup is a good decision in case something would be wrong with the laptop.
  However, even if there is nothing wrong with the laptop, the BIOS update can do if it s released by Toshiba.

  However, you asked for the older version of BIOS, unfortunately, I guess that in one such case that only Toshiba authorised service provider could help you get this BIOS because Toshiba EU provides only the latest version of BIOS on the driver page.

  In any case, I guess you want to downgrade the BIOS in order to solve the problem of the keyboard. Right?
  I read your other thread on the problem of Polish characters. In my opinion its is not really clear if its BIOS really make since you have used another system. Also if external keyboard works properly, the problem would not be bound to the BIOS.

  However, this topic needs to be discussed in your other thread.

• Satellite 5205 - after updating Bios - repairman / message call Bios

  Toshiba 5205 - repairman / call Bios - need help.

  I flashed my bio and the laptop locked in windows and not extinguished after the flash.

  Now when I turn on the laptop, I have no picture and the front of the laptop has a LCD remote that says: technician / call the BIOS.

  I already disassembled the laptop battery and let sit a day full to the bios killthe, but I get the same error and still no picture.

  How can I fix? The bio should be dead by now. Am just using CA power supply for power. I tried to connect the battery in and I also put battery back in. bio and I get the samething on the remote lcd display error message.

  There must be a way to work around this problem, if anyone knows please let me know.

  Hi Jim,.

  Unfortunately the battery will not reset your BIOS. The BIOS is maintained by a battery on your motherboard (CMOS or RTC battery) and you will need to disassemble your laptop to access the battery. Even remove the battery CMOS does not restore your BIOS, since it will be held in a non-volatile CMOS chip area.

  You will need to take your laptop to an authorized Toshiba Service Agent to be reflashed with a new BIOS chip.

  Kind regards

• Satellite Pro 4340: How to get older versions of BIOS?

  Hello

  I have a Satellite Pro 4340 and I recently updated the BIOS from v2.6 to v2.7 unfortunately since then randomly, the laptop freezes and requires a reset. Check the error log indicates a fault in which case the ACPI BIOS is written in an unauthorized area. I would now go back to BIOS version 2.6, however the support from Toshiba site only lists the current BIOS v2.7 and not the older versions. How can I get the old version? Anyone here happen to have a backup?

  Thank you

  Ben.

  Unfortunately, to my knowledge, you will find only the most recent update of the BIOS on Toshiba page.
  I don't think that the authorized service provider is able to downgrade the BIOS to the original version

• ENVY M7 n109dx: Post - BIOS update 6/26 no HDMI output to secondary screen

  After that the updated BIOS update yesterday my secondary monitor has not worked. The computer is unable to detect in the settings of the device. Given what has happened, I have:

  Cable unplugged/Replugged and made sure all lights (when you plug the HDMI from the monitor in the specifications of the monitor select several HDMI and analog times and falls asleep so it gets a connection)

  Have you tried both HDMI cables, a new brand

  Tried to update the drivers, I was told that they have been updated

  Downloaded new drivers from HP Support Assistant and installed, Rebooted

  Rolled back the BIOS to the previous version

  I have tested the monitor on my MacBook and it works, if it's not the monitor

  and the laptop is still not pick up my screen!

  Help, please!

  Hi @sschultz,

  Thank you for posting this information. To alert others to what does not work for you, please consider marking "acceptable Solution" on your desktop. This will give him more visibility when other people who may have the same question are looking for help.

• Equium A200 lagging after Bios Update

  Hello

  I have a question for an update.

  I have an Equium A200 - 1VO PSAF5E with Vista Home Premium and it would not work on lan... after that I tried every update driver there who did not help I saw an update to the bios, so I tried the bios one.

  Everything went well and it restarts when it restarts it lag (sticks) like crazy, I formatted and although he shifted after the restart installed during it sticks again every 3 seconds for a second about. Now when start of the crossbar for about three seconds, and glue the same as it does when the system starts finally.

  I got the update again and he ran again, but he said I had this version so that it wouldn't continue. I now have version 2.10.

  Is - it may be back to the version that did not have my laptop stick so or am that I stick with it like that until another flash of the bios is available?

  Thanks for any advice.

  PS something I noticed was when I tried to reinstall that it went well until it was at the stage end and rebooted, then it shifted, apparently not trolling before then on installation. Ive treid set shape and do it several times, but it happens at the same point and lagging even once (sticks).

  First of all I have to say that it of not possible to go back to BIOS version later because only the most recent BIOS is available on the European driver Toshiba page.
  I don't very well but eventually the Toshiba m authorized service provider would be able to downgrade the BIOS to the earlier version.

  However, the new BIOS that is found on the Toshiba age shouldn't t to worry.
  In your case I would recommend you first access the BIOS and set the defaults.

  I put t know if this can help, but a new installation of Vista OS could also be done. Upgrading from Vista, and then install all the patches.

• Satellite Pro L20 - DOS based Flash BIOS?

  Satellite Pro L20 - DOS based Flash BIOS?
  Anyone know where I can download this?

  The BIOS download page gives you only the Winflash & I need to Flash this laptop backpack... are installed Safeboot in NHS policy & I'm now stuck on the keyboard & touchpad, have you tried a USB keyboard without success.

  SafeBoot is a disk encryption package which initializes windows to start so I am unable to use Winflash.
  May need to find an operating system on a bootable CD if this based BACK Flash BIOS is not found...

  Hello

  Unfortunately the BIOS from the base of BACK is not available on the European driver Toshiba page and so you will not be able to download it.

  I m not very good if it would be possible, but perhaps a local ASP may be able to provide this version of BIOS Just contact the guy and just ask

  But in my opinion it s advisable to Flash the BIOS using a Win version because it s much safer.

  Welcome them

• Is Tecra S5 - useful to update the BIOS?

  Recently, I bought a laptop Tecra S5 and yesterday I noticed an update of the BIOS on the Toshiba site.

  I googled a lot searched this forum and found a lot of discussion about people having problems after updating (flashing) the BIOS. So I want to ask you if the update worth it, and if someone with an S5 did. Could someone also tell me if there is a way to ensure that you can roll back previous BIOS version after that an update does not?

  The laptop is precious to me and since living in this time of financial crisis means that I won't be able to buy a new one if I screw this up I want to be sure. Thanks in advance.

  EDIT: I forgot to mention that I installed Vista 64 due to having 4 GB of RAM.

  Hello

  First a BIOS update is not required if your laptops gently. Never touch a running system ;)
  A BIOS update is only recommended if you have any problem with him, for the memory vivid example not properly recognized or so.

  I only updated the BIOS of my laptop if I have problems with it, and that means that I have updated the BIOS on my Toshiba notebooks 3 times yet. I m not a Tecra S5 owner but I never had a problem with the BIOS updates. Some people who said that the update of the BIOS didn't forgot to read some instructions how to do this:
  Before you start an update of the BIOS, you must close all running programs and close all background processes that you don't need. Also your antivirus and firewall should be disabled and must be signed in as an administrator. Don t forget to connect the AC/DC adapter, before start you.
  If you follow these tips, normally the BIOS update must be done successfully.

  A BIOS to a previous version downgrade is possible that anuthroized service provider. This means that you can downgrade it yourself.
  But the newer versions are pre-tested Toshiba and should not cause more problems as before. Newer versions of BIOS problems.

  I hope I could help a bit! :)

  Welcome them

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• HP EliteDesk 2 800 LTS: BIOS refuses to activate Legacy Boot

  I tried boot Legacy enable and disable the Secure boot on this machine for a few days now.  My current BIOS version is 2.05 N01 11/11/2015.  It's the strangest thing.  I am able to make changes, save and make the switch successfully... but I can not inherited to activate and save.  I took action:

  -Authorized secure boot key - Reset

  -Selected Legacy allow to support and secure startup disable - Reset

  -Go back to BIOS Boot Options-->--> try to uncheck UEFI Boot Order (impossible)--> checks if Legacy Boot is available and this is a no go

  - Then come back for secure boot options and check that any of my changes saved.

  I tried to restore the Version of Bios to 2.04 but that made no difference so I put 2.05 back.

  I am looking for these machines to perform a PXE boot to capture the image of our school district, but I need to boot Legacy has to do.  After several attempts to get the inheritance to allow, I decided to simply use our Win7 Ent disk BUT cannot do as he says the "boot image selected not to is not authenticated."  Of course the difficulty I found that it was to allow Legacy Boot... which I can't do.

  I looked through the forums and found some possible solutions, but none of them have worked.  Help, please!

  Thanks for the reply.  I ended up doing the following, who worked finally(not sure why):

  -Updated BIOS back to V 02.05

  -reset back to the factory settings in the main menu

  -in the bios, set the password and return the tag property, as required by the school district, I work for---> restart

  -back in the peripheral disabled bios bootable usb and cd rom (as is the political district of tech)

  -went to ensure startup and selected options in the menu drop-down 'enable and disable the UEFI boot'--> restart

  -return to the bios, THIS TIME the check box next to the legacy menu startup options was available.  I checked the box and could also uncheck boot UEFI--> restart

  -f12 to PXE boot and magically it finally worked

  Again, it is very similar to the process that I tried at the beginning that the only difference was the amount of reboots needed to get it done.  I had a similar problem with another 800 G2 and no matter what I did it would not be PXE boot so I have restored the version of the bios on 02.04, restore factory settings and the process I just oultined above.  AND IT has WORKED on this machine.  It's a matter of incompatible with the G2s 50 or so 800 our district bought last month.

  In any case, we are able to get these machines for a PXE boot using one of two methods that I have just mentioned.  We are so good at the moment.  Thanks again for your response.