Back to the light works not

Similar Questions

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• an advanced feature to turn off the lights does not work

  I downloaded "turn off the lights" and it seems to work correctly on some sites, but on others it reduces the brightness of the entire screen. In advanced options, check the box that says what it says, 'see all instant' to fix this and DL ' AdBlock more» I have AdBlock plus, but he continues to make the entire screen dim on. How this can be solved?

                         thank you,  lige
  

  his work in mine! 0_o?
  See the image

• Product key on the back of the computer does not work for Word, Excel

  Hello

  The product key from the back of my computer is not valid when you enter in excel, word etc.

  The key of product in the back is for your windows, NOT Office. If you want to use Office, buy an Office license.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Photon: Notification light works not properly.

  I just got this phone and my notification light is not working properly it works on messages and emails but don't not during the charge or bluetooth as the manual said it would be. Help, please!

  
  

• Go back to the snapshot does not properly

  Hello everyone

  I did a VM machine to make images on, in order to get own image as possible. And during this process, I took a lot of pictures and came back, but now it seems that the revenant does not work. It does not the machine in the State wherever it was, even if the server indicates its restored.

  Any suggestions on this?

  Greetings Slasky

  No, do not remove them. There are references to these. Create a new snapshot and remove it via the Web GUI. Then all the others should go, as well.

  If this does not work, we can manually delete snapshots.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Segoe ui light works not when embeded in firefox 24.0

  Here is a lightweight html for segoe ui police script I've been to embed in my website.
  
  I use the WiX online html editor as police segoe isn't availabele I had to integrate

  <div class="WordSection1">
  
  <p class="MsoNormal"><span style="font-size:35.0pt;line-height:115%;font-family:
  &quot;Segoe UI Light&quot;,&quot;sans-serif&quot;;color:#595959;mso-themecolor:text1;mso-themetint:
  166;mso-style-textfill-fill-color:#595959;mso-style-textfill-fill-themecolor:
  text1;mso-style-textfill-fill-alpha:100.0%;mso-style-textfill-fill-colortransforms:
  &quot;lumm=65000 lumo=35000&quot;">About us<o:p></o:p></span></p>
  
  </div>

  It worked perfectly in chrome, IE nd safari, but when I discovered in Firefox appears as "Georgia" font
  Please HELP me WITH a SOLUTion

  Thank you very much for your response encouraged me ideas
  the font weight wasn't the thing, it's the font family to worry about all this
  I added the lighter font as usual and another 'sans-serif' font in the font family and it work absolutely perfect ed

  ''''''''''''''''''

  Thank you
  CONCERNING

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• Why the Sony A7 in M mode only-2 or + 2 in the light meter, not give up to the - 5 or + 5

  IM starting to expand my skills for photo shooting more and as much as I can using the Mr. I realized that the light meter will typically from-5 to + 5. During shooting in mode M, the indicator does move to the number of +-2 position, so between-2 and -5, + 2 or + 5 indicator disappears. Is it a setting or feature that I missed, seems to be a waste if I can't really control the complete appearance in M mode.

  Hi wesleyhall08,

  Welcome to the community of Sony!

  When shooting in M mode, the meter that you are related to the is the manual counter, which is located in the lower center of the screen between opening and ISO. This watch-2 or + 2 only and normally will blink to let you know if the picture you take is already underexpose or overexpose. He's not going to-5 or + 5 and it's normal.

  When shooting in other modes as a mode or S on the other hand, this light meter becomes exposure value. This means that you can change the exposure of the image by changing the value and it will-5 to + 5. Note that when you press the Fn key and change the value of exposure it allows you to move from-5 to + 5. But when the camera is set to M mode and you press the Fn key, notice that the EV is changed in MM and is grayed out choices. This means that you will meter the camera manually by adjusting the shutter speed and aperture. The MM or meter manual serves as a guide to whether the exhibition is balance, underexpose or overexpose when you use mode 0 M. you gives a balanced exposure, -1-2 gives you underexposed and + 2 + 1 gives you over-exposed image. + 2 flashes, this means that the image is overexposing way and if it flashes-2, it means that the images is much too dark.

  If my post answered your question, please mark it as "accept as a Solution.

  Thanks again and have a wonderful day.
  Zander

• Activation of Windows XP, says my license key (directly at the exit of the COA sticker on the back of the machine) is not valid.

  I reinstall Windows XP on a Compaq owned since 2002.   I used the Operating System CD Compaq accompanying to created a slipstreamed XP SP3 CD.  Installation past large, reading product key - it just behind the back if little hologram sticker certificate of Authenticity on the back of the machine that has been there for the past 11 years.  Microsoft says that my license is not valid.  Searched and searched found this MGADiag tool, here are the results.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Release status: not activated
  Validation code: 1

  Code of Validation caching: n/a
  Windows product key: *-* - 93GTD - 7RV3F-PJ6RY
  The Windows Product Key hash: tpwHHq6AjQynbXZyYzioDsxVgPk =
  Windows product ID: 55277-OEM-2116362-92812
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {EFF99AA2-B07F-4B3F-90B2-FE4DF021359D} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a
  Version: n/a

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {EFF99AA2-B07F-4B3F-90B2-FE4DF021359D}1.9.0019.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-PJ6RY55277-OEM-2116362-928123S-1-5-21-1390067357-606747145-1417001333CompaqCompaq PC Compaq786 K 220020328000000.000000 + 0005DB334CF0184205904090409Central Standard Time(GMT-06:00)03109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: C019:Compaq Computer Corporation | 10014:Compaq Computer Corporation | 1FFEA:Compaq Computer Corporation | 1FFEA:Hewlett - Packard Company
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  They do, and as you pointed out, persistence is the key word.

• Premiere Pro CC 2016 does not work properly and I can't go back to the last working version?

  Everything was fine so I've upgraded to the latest version (2016.3?)

  The reading was nervous or uptight altogether and vomit constant errors.

  I use first commercially and only can afford to be in any way buggy.

  I started the next version down again (2015) which seems actually much earlier than 2016 previous version I had used successfully? 77

  Now all my projects will not open because they were modified in a newer version!

  I'm on a dv7 HP ENVY which worked without problems on all other versions of first CC for more than two years.

  I've seen others complain how buggy the last CC is which is very disappointing for a commercial tool paid that I relay on so many things.

  At this point, I would be happy to know how to install 2016.2 and not in 2015. It worked well for me on 2016.2 & I have no confidence in 2016.3

  Thank you

  Is there a way I can go back to instead of 9.0 9.1? The CC app does not give me this option?

  You go back to 9.0, then download/install the 9.1 patch:

  http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html

• After the BIOS update, the light does not work

  I upgraded my BIOS 83ET78WW T420 (1.48), but now my microphone mute button and brightness controls no longer work. When I adjust the brightness, the indicator appears in the display, but it does not actually.

  Are there updates more that I have to apply to get this working? I don't want to install all the additional tools of lenovo to get my screen to work, what is needed. If we need more information on my system, let me know.

  Material: T420

  BIOS: 83ET78WW (1.48)

  OS: Windows 10

  Thank you!

  I found the solution. The Intel HD graphics card drivers have been somehow erased when I upgraded. Enter devmgmt.msc and re-install the drivers solved the problem.

• Activation key on the back of the laptop will not activate Microsoft Word, Power Point etc.

  The activation key on the back of my laptop, which is supposed to activate Microsoft Word, PowerPoint and so on, will not work. What should I do to make it work?

  Tuesday, September 25, 2012 23:46:24 + 0000, Anthony0629 wrote:

  The activation key on the back of my laptop, which is supposed to activate Microsoft Word, PowerPoint and so on, will not work. What should I do to make it work?

  It is not supposed to activate Microsoft Word, PowerPoint and so on.
  This is the product key for Windows, and it won't, because it's
  the wrong key for Microsoft Office.

  Ken Blake, Microsoft MVP