Segoe ui light works not when embeded in firefox 24.0

Similar Questions

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• HP ProBook 440 G2, fingerprint reader works not when I upgraded the Win 7 Pro form to win 8.1 Pro

  My HP ProBook 440 G2, finger print reader does not when I upgraded the Win 7 Pro form to win 8.1 Pro.

  Device manager showing the biometric reader works correctly. But in fact, the finger printer reader is not reading or senseing. It seems that the part "dummy". Please help me to correctly configure step by step for that matter.

  Thank you

  Hillet

  Have you installed the software driver validity sensor fingerprint for Windows 8.1?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943811 & swItemId = ob_134806_1 & swEnvOid = 4158

  See page 64 in the manual Windows 8.1 according to the configuration of fingerprints of validity information

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943810 & docid = emr_na-c04371762 & docLocale = en_US

• Photon: Notification light works not properly.

  I just got this phone and my notification light is not working properly it works on messages and emails but don't not during the charge or bluetooth as the manual said it would be. Help, please!

  
  

• Ports USB U2312HM works not when connected to USB 3

  I use a U2312HM to work, but when I plug the USB connector to a USB 3 port on my laptop, the USB 2 ports on the monitor are not recognized. Device Manager shows it as an unknown device and no drivers to install can be found. When I use a tool like slim or driveridentifier drivers it doesn't ID the device but shows not all compatible drivers.
  When I connect the monitor to the only USB 2 port, I have on my laptop that hub is USB monitor comes to life, but I'm already using this USB port for another purpose. Can anyone tell my where I can find the correct drivers?
  I'm running Windows 7 Pro SP1 on a Dell Latitude E6530, processor Intel Core i7 3770QM with 8GM ram.

  Kvwielink,

  Install this driver, restart when done, repeat the test.

  Intel USB 3.0 eXtensible Host Controller Driver
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

• Swf flash not working not when it is embedded in html.

  Hi all

  I am a newbie to Flash.

  I'm trying to do is a simple swf with a set of icons of social media like facebook, twitter, youtube, etc.

  I could do in flash using the png as buttons icons and I wrote script action to navigate to the respective Web sites, when you click on each button.

  Everything works fine if I run it from Flash as an swf object (ctrl + enter). When I click on the social media icons, the respective websites are opened in the browser.

  However, if I incorporate this swf in html format, the animation of the buttons work, but sites do not open. I used the code to integrate my swf in html below:

  < div id = "flashContent" align = "center" >

  < object classid = "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width = "369" height = "100" id = "social_media" align = "middle" > "

  < param name = "movie" value = "social_media.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "social_media.swf" width = "369" height = "100" > "

  < param name = "movie" value = "social_media.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-<! [endif]-->

  "< a href ="http://www.adobe.com/go/getflash' > '.

  "< img src ="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"alt ="Get Adobe Flash player"/ >"

  < /a >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < / div >

  Help, please.

  Thanks in advance.

  Sarat.

  Hey Ned,.

  I tried again by the incorporation of the flash and html on the server download object, and surprisingly, it works now... Maybe that I would have ruined the location of the file in my first test.

  Thanks for your answers.

• Add-ons such as Christmas lights, flash on a stop when first installed, but not when back to Firefox. What should do?

  Add-ons with those willing only twinkle or flash during the initial installation. When I go out and come back, they are only a stable image.

  Are you talking about a lively light theme (Persona) this style of the user interface with a background image?

  This is intentional, see:

  • https://support.Mozilla.org/KB/animated-theme-stops-working

• Contact ID works not when the iPad 9.7 Pro is supported

  My iPad running iOS 9.3.1 Pro 9.7 is only a few days old and working perfectly except for one question...

  When connected to the charger the Touch ID does not recognize the fingerprint to unlock the device.  As soon as I unplug the accusations, everything works well again.  I've already talked to Apple, however, we thought that resetting factory solved the problem, but in reality all that has changed is that the charger As disconnected.  Before going back to Apple once again, I thought I would check with the experts.  :-)

  Thank you...

  various reasons are cited-

  1 low power mode

  2 electrical interference

  3. no standard charger

  Not sure, there is a unique solution

  iPhone 5 s Touch ID does not not then plugged on charge, charge.

• Satellite Pro M30 graphics works not when the driver is installed

  Hi all

  I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

  I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

  It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

  Can someone help me?
  [email protected]

  It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

  In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

  I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

• HP Pavilion Gaming: Touchpad works not when you press keys

  As the topic says I can not use the keyboard and mouse at the same time. I tried to disable Smart sense in the Symantecs click buffer settings by moving the slider all the eway to the left, but this has not solved. I also went in the mouse and the parameters of the touchpad and value no delay, but it also did not resolve my problem. I have the latest drivers (19.2.11.38) installed. Is there another setting I'm missing?

  Hello

  Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.

  You may be able to work around this problem as follows.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  Version of the Synaptics 17.0.18.8 driver

  Disable your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• speakers work not when you use the external monitor

  I use a laptop HP Envy and HP Pavilion 25bw external moniter connected via an HDMI cable. With the help of Windows 8.1. The sound is muted when the laptop lid is closed. If I open the lid I hear for about 2 seconds, then it turns off. If I remove the HDMI cable, the sound lights. How can I get the sound to work with the connected 25bw and close the lid?

  Hello

  Please try to hell sound HDMI playback devices

  Right click on the speaker icon,

  Select playback device

  Click with the right button on HDMI sound

  Disable it.

  Kind regards.

• Micro works not when using Skype. Problem is not with the microphone, but with Skype. Ive tried

  When you use Skype, my internal microphone does not work - friend says that he can not hear the voice, but he can hear other sounds - music on youtube for example. Ive tested the microphone on Skype Echo - it wasn't working at all. I tested it on a voice recorder - MIC was working properly. Also when I just started to use this laptop (3 days ago), I spoke with a friend through Skype for about 3 hours, and then he couldn't hear me suddenly annymore. If something is wrong with Skype. Computer consultant suggested me to contact Skype support technicians.

  In Skype, open Tools-> Options-> Audio settings. There is more than one option available in the selection box for Microphone?

• Z500 touchpad work not when you use the keyboard. Please help me please!

  Hello

  I recently bought a lenovo z500 and it's great, but I have a little problem. When I use the keyboard to play games (I use the WASD keys) the touchpad does not, which means I can't play. Help, please!

  I got it finally started working by removing the pilot of the momentum. I don't think that I will reinstall it. Thanks for your help

• Wireless mouse not working not when the games starts

  I have a logitech LX6 wireless mouse and keyboard. They stand work very well in the main menu of Windows 7 and surf the Internet, how ever when I start a game (I tried WoW and SUP Commander) the mouse stoped working and everything I could do on the keyboard was out esc. Any ideas.

  It's strange.  You have another mouse and recently pass to it?  Or have you had it for awhile and the mouse has started to act like that?

  I could certainly go to the Web from Logitech site and see if there are any updated drivers for your mouse.  Also, make sure that you don't have another mouse plugged in at the same time playing these games.  I guess you do not, but sometimes a game will remember your previous settings of the mouse, and when you go play, he thinks that the mouse is always there.  So, you will need to uninstall and reinstall your games.  However, I would do that as a last resort.  If your mouse is new, you may contact support of Logitech to see if they know work around or solution.