Backgrounds and simulation software

Similar Questions

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• Adding Animation Slide to the Simulation software

  Captivate 9

  Check-in: Simulation software

  Mode of delivery: MP4

  Hi all

  I wonder if anyone can help/test of validation of my plan here.

  I created software Simulations, saving a long process of analytic S/W tool.

  I need a simulation of software to add captions, highlight boxes etc.

  The software has some nice on the graphic animations when you drill down on the data. A bit like a progress bar.

  You can see a screenshot of the effect here: Craig Clarke - sample Analytics

  This animation effect is not picked up when the 'software Simulation' recording in captivate.

  So the first question. Do I have reason to think that you can't pick this up when recording a Simulation software, even changing the settings?

  And second question, if the above is correct, is my best method to insert slides CPVC in my Simulation software, wherever this animation is displayed?

  Thank you very much

  Craig

  You must save these animations using the video capture. So in Captivate, slide and choose "vidéo Demo" to record a video of full-motion animations.

  See you soon... Rick

• Models and simulation of collage/combination

  
  Is it possible to paste or import a software simulation that has already been completed as a project in another project that was created by using a project template?  I tried just copy / paste, but it did not work.  Any help is appreciated.

  You can copy and paste slides between the projects, but to ensure that they have the same resolution. A model has nothing to do with it, you copy and paste between cptx-projects. Or do you mean that you are using a model (cptl) and a cptx project, which is a simulation software?

• Best way to make the simulation software

  Hey guys, it takes me faaaaar too long to create my first simulation software and I was wondering if I could get some advice? I came to Captivate because I was using Screenflow, then AE initially to edit my subtitles/audio/intros and video files caused problems with preview/render. I basically want to captivate screenshots railways and the mouse to keep the file size down, so I can easily work on some post production in flash. But... If I export for flash to captivate, click on the mouse and the trajectories are not registered. If I have to 'release' of captivate and import the swf file into flash, it blocks Flash, even with the smallest clip. I've updated to the last version captivate but the same problems. What is the normal way to record and edit a screencast with captivate? Does anyone know why it is not export all data to Flash? Do I have TO use Captivate for post production and then export to the web?  Any information appreciated, thanks guys

  Why do you want to export the Captivate file to Flash? I don't get that at all. Captivate is the best tool to produce a SWF file which is a software simulation (interactive, demo or evaluation), made tons of those of the IMO. But never used Flash for that at all, Captivate takes care of everything.

  Moreover, I think that you posted something similar in another thread, please who is not considered a good practice.

  Lilybiri

• When I close thunderbird is still running in the background and always using data?

  I'm with an internet provider that has limited use of data per month. If I close Thunderbird when done using it it is still running in the background and using the data or is it closed here for not to retrieve messages or using the data?

  When you close Thunderbird, it cannot check or retrieve new messages.
  Not sure what you mean with "always running in the background.
  When you close Thunderbird is closed. Period.

• Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. How to get back to it?

  I have a problem with something in firefox, it is quite minor, but still bothers me. Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. I don't remember what I did to change this if it's my fault; If anyone knows how to get back to it, I would be grateful.

  This is the new behavior in Firefox 11.

  • Old Style of default Image: https://addons.mozilla.org/firefox/addon/old-default-image-style/

  See also:

  • [923127/questions/923127]
  • http://userstyles.org/styles/58710/Firefox-11-change-image-view-background
  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2443535

• I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  10.5.8 it is compatible with firefox only with Intel see 10.0:

  http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/

  for your ppc mac, the most recent is the version that you have 3.6.26 see:

  http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• Lenovo s820 features calendar and converter software

  I can't find calendar and converter software features. They are not in the tools.

  In the tools, I have calculator, recorder, clock, flashlight and radio.

  Someone know where I can find calendar and converter? My phone has 4.2.2 android viberom.

  The converter is not available by default, you should use a 3rd party application, the calendar should be there. And the ROM you are using is old the most recent available is 1411 which is 4.3 android

• loop control and simulation: sync settings

  Hello

  Is it possible to access times higher at 1 kHz source in synchronization settings, control and Simulation in a loop, without use of real-time targets? For example, using time cpu.

  I use myDAQ OR data acquisition, and I need a 100 kHz synchronization source about.

  Thank you very much.

  Kind regards

  Keshav

  N ° when running on a PC of the class, you are working with a set of standard material (with its clock 1 kHz) and a non-deterministic BONE, and there is nothing you can do about it. That is why acquisition cards NOR are all smart devices with their own processors, memory, and clocks.

  Mike...

• Live PID missing under Header Control Design and Simulation

  Hello

  I have currently the full version of the University of Labview 2009, but the PID screws are missing. I understand that they are under Control Design and Simulation, but there is nothing in this topic.   In addition, an image of my license manager OR is attached to show which is enabled.  Any ideas?

  Thank you

  The PID toolkit is part of the Developer Suite DVD.

  You have the following Professional Developer?

• Control and Simulation in a loop / while loop with TCP/IP reading / writing of synchronization

  Hello, I have a problem with reading TCP/IP and written in two loops. The problem is NOT to get the two loops to read and write to and from the other. This has been accomplished. My problem is when I run control and the loop simulation on my laptop and the while on a RTOS remote on the controller on-Board of LabVIEW in a remote PXI chassis, the while loop the remote system running on four 4 times faster than the loop control and simulation on my laptop. In other words, for each iteration of the loop control and simulation on my laptop, there are 4 four iterations of the while loop on the remote system. I need to know how to get a degree of kinship (1:1) with these iterations of the loop. When I run a longer simulation in real time, say 10 seconds, the control and Simulation loop begins to slow, i.e. the simulation time slows down until it is no longer in real time and the "Late Finish"? Parameter is set to true and the LED lights and continues to stay lit. At this point, the system destabilizes due to what I believe is being well sampling rate too discreet and I have to end the simulation. How can I get a ratio of one to one between the loops and also to avoid slowing the loops causing destabilization?

  To give an overview of my application, I implement a control system in a network, seen in "image2.png". This is achieved using my laptop as a subsystem 1. Reference signals are generated from the laptop and the error signal is produced. Control measures taken and the control signals are sent via TCP/IP to the remote system. Position feedback is returned, and the process repeats. My system has Core I7 Procs w / 3 GB of RAM, up to 1 GB/s speed via ethernet and LabVIEW 2011 installed with all necessary modules and networking tools. The attached VI Custom_Wireless_Controller works on my laptop. The remote system I'm working on that has the 7830 NI R Series with FPGA card. OTN runs on the PXI chassis with an enbedded controller that has networking capabilities of up to 100 MB/s via ethernet. I use the FPGA for the acquisition of data and apply control signals to my plant. The plant is the PCE twist connected to the FPGA through the cable of the ECP - RIO of NOR. Subsystem 2 is this side of the CNE. The FPGA collects position, he sends to the controller via the network, receives signals from the network drive and writes signals to the plant power amplifier that operates the plant. This process is repeated and the VI and is titled Custom_Wireless_Plant.

  I appreciate the help really and look forward for her and for any question!

  Well, the first step is to understand what you have set up right now. Your control and Simulation loop on the side of the controller is configured as 'Runga Kutta 4' and you have a loop timed on the other side. In addition, you have the primitives of TCP/IP on the control and the Simulation diagram and means he will perform (a message) on the size of each minor step, which in your case is 4.

  So, you have two options:

  1. replace the Solver side controller Runga Kutta 1 (this must synchronize loops)

  2. hold RK 4, but create a Subvi around two primitives of TCP/IP and configure from the VI to run than the major (continuous) step-size. If you do it right, you should see a 'C' on the upper right part of the VI you have created.

  Please let me know if what I said is not clear...

• design and simulation of control tools

  Hi all

  Does anyone know if indexing is possible in a loop control and Simulation in Labview? I need to save to a table of all simulation data.

  Thank you

  Ussr123.

  Resolved: the required icon is called: collector.

• Pavilion laptop - 15-ab262nr: HP 3D DriveGuard and Coolsense software does not install

  Reinstalled Windows 10 on this PC laptop shortly after purchase (clean install to remove all the bloating) and

  Software HP Coolsense and DriveGuard will not install. After having downloaded DriveGuard and try to run the installer, nothing happens, so I go to the list of programs and see here but it is grayed out. Tried the latest version 6.0.28.1 Rev.A. When you try to install Coolsense I get an error message that the software of .net framework must be installed, but it is already part of Windows 10.

  Anything can happen on the ideas?

  Thank you!

  Hello

  CoolSense requires .NET Framework 3.5, which can be present on a new installation of Windows 10 - you can check it as follows.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  In the left pane, select "Windows turn features on or off" and let the list populate.

  If .NET Framework 3.5 (included .NET 2.0 and 3.0) is not selected, add a check mark, and then click Ok.

  Once installation is complete, restart the computer, let Windows take over completely for a few minutes, and then try to re-run the installer to CoolSense.

  As far as HP 3D DriveGuard is concerned, you could try the following.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  Make a right click the entry for HP 3D DriveGuard and choose uninstall.

  Once complete, download and reinstall the Chipset driver below.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet, once it finished, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K