backup and restore does not

Similar Questions

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Backup and restore does not recognize my external HARD drive.

  When I try to use the ms backup and restore it only recogniza my external HARD drive.

  Is that possible reinstall or repair?

  Hello daniloalvesmaciel,

  Thanks for posting on the Microsoft answers Forum.

  First of all, I could check and see if the hard drive is listed on the Windows 7 Compatibility Center. Clickhere for a link to the Compatibility Center. If it's on the Compatibility Center, then check out the web site of the manufacturer for updates or drivers.

  Then check if you see the external hard drive in the Device Manager.
  To check these options:

  1. click on the Start button to display the Start Menu , then selectControl Panel .
  2. the Control Panel window opens.
  Now click system and security from this window.
  3 Scrollfor Device Manager.
  4. click on the Device Manager.
  5. to view material click on any category and the associated list of installed hardware. For example. Click on hard drives.
  Right click on the external hard drive. You can see the different options likeUpdate driver software, disable, uninstall and properties etc.
  6. click on Properties to display the details of the hardware. Click theDriver tab , to view the details of device driver.
  7. then on the software update driver to check and see if you have the latest drivers.

  Then check again and see if you can save on the external hard drive.

  If this is not the case, try to map a drive to the external drive. Can you back up now.

  Please respond and take stock of your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Backup and Restore does not save F: and Q:?

  Windows backup and restore settings show that it is possible to backup C: and D:, but shows no F: and q.

  You save hidden records, for example HP-Tools or any disk recovery.

  Using windows backup, there are two types of backup

  (1) data up - obviously only backup data

  (2) image, which creates a complete picture of the system, to the date the image was created. You can then restore the image if necessary

  Second

  HP would be provided either a defined recovery disk, or more generally presented guidelines on how to create the recovery disks. It is a HP process, not a victory for MS a.

  Recovery discs using HP allows you to fix either the sys or a destructive restore to factory supplied State.

  If you restore to factory of the reader state Q is created when initialize you Office Starter

  BTW save you or Image to the external media, if the drive breaks down (this isn't a head crash) everything on that drive is lost, to the end user.

• Backup and restore does not work, it always tells me to choose another point restor and try again.

  Each restore point I try he always tells me to choose another point of restor and try again.

  . Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• Cold Oracle EBS backup and restore does not work

  Hello
  
  I made a backup with tar, while the database is open and not in mode archive (archivelog disabled) and restored on another machine.
  OS = AIX 5.3
  Oracle EBS 11.5.9
  9i database
  
  When I started the database I had errors.
  
  Is there a metalink document that will help me to recover the database?
  
  
  I followed the following Metalink:
  
  Database startup fails with ORA-01113, ORA-01110 errors [146039.1 ID]
  Common causes and Solutions in case of error ORA-1113 in backup & recovery [ID 183367.1]
  However, I note that the foregoing applies in the case of archivelogs = active
  My case: archivelogs = disabled
  
  SQL > startup mount pfile=/oracle/proddb/9.2.0/dbs/initPROD.ora
  ORACLE instance started.
  
  Total System Global Area 615482512 bytes
  Bytes of size 742544 fixed
  436207616 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  Mounted database.
  SQL > SELECT V1. FILE NO., NAME
  V $ BACKUP V1, V$ DATAFILE V2
  WHERE V1. STATUS = 'ACTIVE' AND V1. FILE # = V2. FILE NO.; 2 3
  
  no selected line
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  ORA-01112: media recovery not started
  
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  ORA-00308: cannot open archived log ' / oracle/proddb/9.2.0/dbs/arch1_637.dbf'
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 3
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  
  SQL > select HXFIL File_num, substr(HXFNM,1,40) filename, Type FHTYP, HXERR validity.
  FHSCN SNA, FHTNM TABLESPACE_NAME, status FHSTA, FHRBA_SEQ sequence
  x $ KCVFH;
  
  .....
  .....
  .....
  
  419 selected lines.

  981553 wrote:
  I understand that hot backups can be done with noarchivelog and data will be inconsistent.

  Fix.

  However, the database should not be able to recover some data are there in data files and commissioning normally.

  This is my question and my concern. I looked for Metalink and couldn't find anything about it.

  I want to start the database with all this that data is present after the backup. All the solutions for such a scenario?

  If you took an offline backup, you can recover the database to restore all the files and bring services up (without recovery is needed here).

  And, as you mentioned "hot backups can be done with noarchivelog and data will be inconsistent.

  Thank you
  Hussein

• WIN 7 backup and restore does not

  Hello

  I tried several times to get the backup works on WIN7, recordings, ran virus and malwares and finally disk, removed and used the

  Assistant. The problem is I used to be able to use VISTA and WD Passport external drive backup, but since the upgrade to WIN7, I spent more than 30 hours, determined to get this started.

  Finally, the backup will only recognize G Drive and I'm trying to get the backup to recognize the drive (F) which has been reformatted several times. I can't do

  go... help please!

  Havanese

  Thank you for your response.

  I appreciate your efforts and the patience that you put to solve this problem, sorry for the inconvenience.

  I suggest you try the steps from the following link:
   

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and the restore on a Windows 7 Computer Wizard.

  http://support.Microsoft.com/kb/975692

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Backup and restore will not format disk

  I try to use Backup and Restore. When I click on the back of the files, I get a pop-up box that asks me to format the drive. After clicking on the Format, the following pop up box says unsuccessful Format. Sometimes, he also disk write-protected. I use Vista Home Premium and using an optical DVD +/-RW drive. I was unable to find anything on it. Has anyone else had this problem? What I can do. I check all the settings I can. Thanks for any help.

  Would you consider investing in an external USB drive and use it as your backup media.  This will work part-time full support until CD as the only hold about 700 MB of data and your hard drive is perhaps in a fit of 250 GB, what amounts to a large number of CD on current prices an external drive will pay for itself within a very short time and you are mucking around with several CD

  He needs that a defective CD or an unexpected shutdown to occur and you may lose all your backup met before this type of failure.  If you must use the CD then just use them to backup your important data.  If you need to perform a full restore, it may be faster in the long term to perform a recovery operation by using your installation media rather than feeding in a multitude of CD.

  One thing that I met, if you buy the CD on the main roads, is that, if they are not stored properly, at home or in a store, the last few CD inside tend to stick to the neighbor CD, which is not a good thing.

  My personal choice is to use a third-party imaging software to back up the entire partition or drive.  I save on a different hard drive installed.  You can use the external hard drive, I tried to sell you.  The entire backup (40 GB) takes about 10 minutes, with a restoration taking around the same time.  I double save my data more valuable, as well, of other external media, like USB, DVD, etc.

  Terabyte unlimited
  http://www.terabyteunlimited.com/prodgrid.html

  http://www.terabyteunlimited.com/image-for-Windows.htm

  Acronis True Image 10 Home
  http://www.Acronis.com/homecomputing/products/TrueImage/

• backup and restore will not upgraded

  I'm about to go from 8.1 to 10 & followed a Dell advises pop-up on upgrading the version of BACKUP and RESTORE I want to make sure that I have the system & data backup before you take the leap win10

  It's R & B will supposedly start the download to install the upgraded version but then disappears. I checked the Task Manager and I can't follow what happened to R & B. I opened/re-opened several times, but I get the same result.

  Please can someone advise? I've been trawling the net for a possible solution without success.

  Hi all

  I gave up on the dell system backup B & a. Note there was a premium account.

  I did as Okaganafan suggested and backed up my data using Windows history file. I have win8.1 & the system maximum return was not available. But I managed to manually run the Windows Image backup.

  I also took a manual backup of my data to an external drive, created an ISO to win 8.1 (just in case).

  The win10 upgrade was painless, even if, as expected, it took some time. It has been ~ 24 hours well. Dell B R & updated now too & suggest that do all kinds of disks of backup & recovery. I'll make those soon.

  I am really disappointed with the Dell Premium B & r t was no help!

• Reference Dell backup and restore will not be updated

  I have just updated to Windows 8. 1.

  When I checked the notifications told me that Dell backup and restore was inconsistent and I needed to re - install. Before all else, I checked the Dell website and it is advisable to update the program by opening and clicking Update.

  Unfortunately, when I click on control upgrade tells me that my request is updated according to the picture below.

  

  Is there another way to update the application?

  Go to www.dellbackupandrecovery.com

  Uninstall the old version and install new then.

  Here's a direct link:

  www.dellbackupandrecovery.com/Dell_Backup_and_Recovery_1.7.5.64.exe

• Picture Windows and restore does not

  Just bought a Dell Inspiron 5000 series computer.  I tried Windows Image, recovery and repair disk and it doesn't seem to work.  Dell requires us to use their backup utility?

  If you try to make a set of recovery media, yes - you should use the utility Dell backup and restore.

• Backup and restore do not respond

  Hello

  I have Windows 7 Professional installed on a Dell laptop computer Vostro (work computer).  We use windows backup backup each laptop, and she recorded this info on our Windows Server 2008.  I had him daily backup, and it had worked well for a long time.  Two months ago it suddenly stopped working.  I went to start the backup manually - through the restore backup dialog &.  I would like to click on the button to say "save now" and the circular icon timer would indicate it was working/thinking for a second, then nothing would happen.  More information - I do not have and have never had Acronis True Image, which is the common cause of this problem based on my research.  I can set up the parameters of the backup-there just never starts the program.  In addition, all the world backups in my office work very well.

  So I troubleshoot-made it for a while, and that's what I've done so far:

  I checked services - they are on

  I looked at the logs for Windows backup - the last entry says he had run February 19, no error and nothing since then.

  I have reset the backup & restore via a registry change - problem persists

  I tried to do a system restore, but I did not restore from February points (the question started February 19th)

  I uninstalled all the programs installed around this date (just google reader & Skype, but I thought at least I could exclude)

  I've done countless restarts

  I tried to do a repair of the boot in the boot menu (F8) - once again, nothing.

  I don't know what else to try at this point.

  Any ideas?

  Thank you

  Erica

  After putting together the newspaper of errors, I looked at Windows backup box in the Task Scheduler, and somehow, he had set up for Windows Vista & Windows Server 2008 instead of Windows 7 and Windows Server 2008.  I changed it to be configured for Windows 7, etc, right click on the name to run now, and it worked!  So I think I am well now.  Thanks :)

• BlackBerry Smartphones trying to backup and restore - pin not recognized

  I hope someone can help me!

  I'm trying to back up my data on my 8320 and my pin code is not recognized.  I downloaded the software, while the phone was NOT connected.

  Is it possible that this issue MAY have something to do with the company's server?  I've owned my blackberry for years.  When I took a new job, I asked my personal blackberry to be hung on the server of the company.  When I left the company, I have asked that it be removed from my blackberry.  I have not tried to save the data for this time.  I'm changing phones and my pin code is not recognized.  Further study revealed that the IT security certificate is always on the phone.  Could this be why I can't save the data?

  Are there other options to move the data to the new phone without wiping data from my old phone?  I need to transfer my saved e-mail messages, entries in the calendar and contacts of 1111 to my new phone.

  Does anyone have a solution for me?

  Thank you very much

  Hello

  Service packs will not provide compatible Bluetooth. It is an option of hardware on the PC.

  You can, however, by a Bluetooth adapter with which you can create a Bluetooth connection.

  Here is a list of compatible Bluetooth adapters:

  http://support.Microsoft.com/kb/841803/en-us

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Windows 7 backup and restore recording is not recent files (and task corrupted images)

  I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it.  The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so.  For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.

  Any questions/comments that might relate to the question above:

  -J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
  -Last week, I realized that my automatic backup didn't work automatically.  I found the problem is due to a corrupt image of task in Task Scheduler I could fix.  I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.

  -J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with."  Any help

  Help for backup and the Task Scheduler issues would be greatly appreciated.  Thank you!!

  André

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to corruption on the system files, please follow the methods below.

  Step 1: I suggest you to re-create the Task Scheduler.

  Steps to re-create the Task Scheduler

  1. Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
  2. Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
  3. Save the changes and then close the registry editor.

  Now check if the Task Scheduler works.

  Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Step 2: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• Windows 7 backup and restore not recognizing external hard drives

  My laptop recognizes the drives external hard and other storage devices and I can read and manually copy files, etc for them. But the backup and restore told me that nothing is connected when I try to run it. Also, when I connect the external hard drive to a USB port, the menu that is displayed does not include the option of backup of the device just connect. Is there a setting I need to change in the backup and restore program? Or is there another solution that everyone is aware of it please?

  Hi Sally,

  Thanks for posting your query in Microsoft Community.

  I understand that the backup and restore does not recognize the external hard drive, but Windows doesn't. I'll be happy to help you with your query. Let me ask you;

  1. Is - this happy with all external hard drives or individual?
  2. What kind of backup are trying to create, auto or manual?
  3. You did it recently no specific changes in the computer?

  There may be several reasons why backup & restore does not recognize the external hard drive. Let's check out the steps below.

  Step 1: Connect the device to a USB (Universal Serial Bus) and a different test.

  Step 2: You can check if the services responsible for the backup of restoration & work or not.

  Volume Shadow Copy and backup of Windows service.

  To check the services, you can follow the procedure.

  (a) click Start.

  (b) in the Search tab, type Services.msc , and then press Efriendship.

  (c) now in the services window, locate Windows Backup service and Volume Shadow Copy services. Check if they are started.

  Note: Check the services separately, and then close the Services window.

  Step 3: Run the next Fixit and check if the disc is recognized.

  Click here to launch the Fixit.

  Step 4: You can try to temporarily disable the security software of the computer and check with the question. Later, re-enable the security software.

  See: , disable the anti-virus software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.