Compatible Windows Vista backup the failed 0x80070005: access is denied

Similar Questions

• Unable to start the service to install under Windows 7, get the error 5 access is denied

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

  I tried many things

  I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.

  I tried to make another administrator account, and then did nothing.
  When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot start the Windows Installer service and get error Error 5 access is denied.

   

  Have you tried to install or uninstall any program?

  The problem may occur may be corrupted Windows Installer engine.

   

  I suggest you follow the steps mentioned below

   

  Method 1: Re-save the installation service

   

  a. click Start, type MSIEXEC /Unregister. in the search box and press enter

  b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

   

  Method 2: File system (CFS) Scan Checker

   

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Cannot get permission to access some files restored from a windows vista backup

  Hello. I just installed windows 7 on a new hard drive. I bought the upgrade to windows 7 Home premium and I had to install vista on the new hard drive first then windows 7.

  I have all my files backed up on an external hard drive and I used windows vista backup and restore to do.

  I have now restored my files on my new hard drive using windows 7 backup and restore.

  I see all my files and folders, but the thumbnails are missing and when I try to actually open a file, a message informs you that I don't have permission to access.

  I tried to click with the right button on the files and changing the security, property, sharing and options, all to nothing does not.

  I tried a few ways to restore my files too, but nothing works.

  If I save a newly downloaded or created file (for example, a photo that I found on the internet) in the same folders, there is no problem and I can access, so the problem isn't that I don't have access to the records.

  Another weird thing is that I can access some of the restored files, but no more than them. I can't think what it is on those I can access that should make them different from those that I can't.

  So far it does not my simple PC! Can anyone help please?

  I should add that I am the ONLY user of this computer, and it is not on a network. Previously, it was the same when I am running windows vista. This is why I'm the only person who should be able to access the files.

  Same problem here after restoring a file backup of Windows Vista to a new installation of Windows 7. This solution worked for me: go to the command prompt, change the drive or a directory, you have problems with and type this:

  ICACLS * / reset/t

  Edit: You need to start the command prompt as an administrator to do. Find it in the start menu, then right click and choose 'run as administrator '. Then use the command as shown above.

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• Impossible to find information of the domain in the database and access is denied. (Exception from HRESULT: 0x80070005)

  Configuration of the VM Windows 8 of my model fails and causes the following error in log audit Broker rd.

  I'm running vWorkspace 8 with different Hyper-V hosts (without SCVMM).

  clues?

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: cloning xxx, try = 1...

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: entering, the folder path is "D:\". ', file name is "xxx.vhdx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: the Final folder path is «D:\Quest VMs\ParentVHDs\ vWorkspace»

  Broker - INFO - CVdiMachineHyperV::buildParentVHDFilePart: Extension, part of parent's name is "xxx".

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: Final full path is «D:\Quest VMs\ParentVHDs\xxx-20130927090200.vhdx vWorkspace»

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: Call to CHyperVClone::doClone...

  Broker - INFO - CVdiUtils::pnGetDomainControllers: entering, strDnsDomainName is "xxx".

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: entering, strDnsDomainName is "xxx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: ERROR: could not find the domain managed in the database information for xxx

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiUtils::pnGetDomainControllers: WARNING: could not find the domain information managed in the database for xxx

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: domain name into IP [xxx] [xxx]

  Broker - INFO - CHyperVClone::doClone: taken exception. Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: took CJvmErr during the CHyperVClone::doClone call.

  Broker - INFO - CVdiMachineHyperV::doVdiAction: ERROR: create failed.  Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) - call stacks - to System.Management.ThreadDispatch.Start)

  Hi Freek,

  I think you have a support case to open to this question as it seems similar to the one I was talking to Sam earlier, is that correct?

  Thank you

  David

• How to restore Windows Vista backup on Windows XP computer?

  I was about to lose my hard drive on a computer with Vista Home Premium. Stored on an external hard drive. Not able to find my Vista rescue cd, I so installed XP Professional I've had. Attached to transfer backup files, but will not transfer.

  Original title: Save transfer problemsproblems

  Hi Marty,

  Windows Vista backup files are in. Disc format hard virtual which is only supported in Vista. You would have to restore them on a computer that is running Windows Vista and then copy the contents of the Windows XP computer.

  See also: back up and restore: frequently asked questions

  How Windows Vista backup uses zip files to store backups (and how to extract the zip files)

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• Windows Vista backup: How to restore a backup

  My HP laptop running Windows Vista Home Edition died yesterday. I did fortunately backup using Vista backup to my external storage device.

  I just got my Dell under Windows 7 Home Premium laptop. How can I transfer my backup files in Windows Vista on my device to external storage to my new laptop?

  original title: Windows Vista backup

  Hi BaylorPup,

  Follow the steps in this document to restore files from a backup.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.