Backup files being missed when connect you seq # go to specified

Similar Questions

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• I receive a "Low disk space" message and to free up space (d) car which seems full of backup files dating from when I got the laptop in 2008.

  I receive a "Low disk space" message and to free up space (d) car which seems full of backup files dating from when I got the laptop. Now I also have the message 'the last backup impossible' because I don't have enough space on this drive.  He had originally 110 GB Local disk (d :)) and it fell to 7.44 MB of free space.) Can I remove the back of the 'safeguards' located in the 3 files and start on the 17/04/2008 right up to 2011-01.05 and just keep the last backup or removing the back will cause problems? Can someone help thank you.

  Hi KarenRoss56,

  You can try to remove the old files of backup from 2008 to 2010 and check.

  Note: When you delete these files and later if you perform a restore, you will not be able to get previous data. If you need one of these files, you can transfer the files to an external drive before you delete the system files.

  You can also use Disk Cleanup to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run more quickly.

  Delete files using disk cleanup

  Hope this information is useful.

• Satellite A100: some files are missing when copying DVD on the desktop

  Hello

  Suppose I have 1000 files on a DVD.
  I drag all these files in the desktop, all of a sudden I see this is 920 files.
  If some files are missing.

  What this may be?
  There are no errors. I don't think that something is wrong.
  I initially thought maybe hidden files are counted in the DVD, but not on the desktop?
  Maybe something on the desktop?

  Anyone have any ideas? I tried to put it on 'To see the hidden files' - it's a Toshiba A100.

  I just ran a scan antivirus on this file and it let's say 1500 files analyzed.
  Haha. Antivirus but probably scanned all etc. desktop.ini and Thumbs.db.
  .. And maybe Windows Vista now have those when you want to display the number of files?

• SMB file sharing problem when connecting EA6350 to a larger network.

  Hi all

  I tried to set up a server of media for my colleagues, but have had problems for the last 3 days.  I searched all possible solutions on various forums and have managed to operate, only to discover the next day that he stopped.  I was able to get it working again, but the same problem occurred and stop randomly with additional problems.

  I will now do my best to explain the installation program. Windows 10.

  I have a line entering my room, I don't know where will the line nor can I trace it (I guess to a switch where everyone connects to).  When I connect it dirrectly on my laptop I have an internet connection.

  My ethernet card is set to automatically get IP & DNS.

  I'm affected: IP: 192.168.68.231 DOOR: 192.168.68.254 subnet: 255.255.255.128 DNS: 8.8.8.8

  I bought a Linksys EA6350 set up sharing of media files with a hard drive plugged into the USB port on the router.

  I plug in the bathroom line to the WAN port on the router and a cable from my laptop to the Router 1 LAN port and still have web connectivity.  The problem is that no one can access my shared SMB drive since it is on IP:192.168.1.1 and all the other computers are on IP:192.168.68. ***

  My router IPv4 connection report is: Auto DHCP, subnet: 255.255.255.128 DOOR: 192.168.68.254, IP:192.168.68.242, DNS:8.8.8.8

  I can't to ping other computers in the range * 192.168.68 my laptop and routers ping function.  The firewall of the router is turned off to allow them to connect. But, still no access for someone else on the shared drive because it is IP:192.168.1.1

  The way I could make it work until it stopped working randomly the day after was by pluging the line room in LAN 2 port, LAN 1 port is connected to the laptop.  The value of my computer laptop ethernet static with these values: IP: 192.168.68.231 DOOR: 192.168.68.254 subnet: 255.255.255.128 DNS: 8.8.8.8 and changed the configuration in the router for what is in the pictures.

  It worked.  I had an internet connection, and people were able to copy movies on the shared drive.  Then it just stops the next day.  The router was no longer able to ping any, but my laptop couldn't yet.  The list of devices on my router tab showed all was connected on the subnet 192.168.68 * but that's all she could do.  I have everything reset, went through the same procedures and then a day later it worked just (if I remember correctly, I've changed the "type of internet connection" on the automatic router to "DHCP").  Only to stop again but this time cut of my Internet connection of laptops until I put the ethernet adapter to obtain automatically IP address and DNS.

  I ran out of ideas runs take the router out of the equation and the pluging directly on my laptop HD and share it from there.

  Any assistance that can be provided would be greatly appreciated, thank you.

  You give the router specified a wrong IP address for the subnet mask of 255.255.255.128.

  Valid IP addresses for this subnet is 192.168.68.2 - 192.168.68.127.

• uxlib.dll file is missing when I try to install windows 7.help?

  Hello

  When im trying to upgrade my windows vista computer to windows 7 32 bit... There is an error indicating that the file uxlib.dll is missing. I got the windows operating system 7 at my school... It is a copy free and legal...

  uxlib.dll file is missing. I think that there is something wrong with my laptop computer registry... any help is very appreciated! Thank you.

  Hello

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  See you soon.

• Error message saying that some files are missing when loading Web site

  Recently, whenever I've updated my file of Muse and then exported and then downloaded via SFTP on my server, my pages Web load slowly and the browser opens with two error messages. A message says files are missing, and the second is a JavaScript error. When I FTP the files, I have all the FTP so I don't know why I keep seeing these two error messages. This happens on Chrome, FireFox, and Safari (haven't tested in IE).

  I managed to get a screenshot on Safari, but his error message is not as detailed as the Chrome.

  Here are the perforated cap of Safari:

  Muse-error - amsk library

  Can someone give me advice on what is the problem?

  My site is: www.goodseed.com.

  Thank you.

  Amos

  Thank you for helping me check on this issue. I spent the better part of two weeks racking my brains out on what was the cause of the error message. According to me, what it boiled down to a faulty firewall on the server of our hosting provider. He was blocking the movement of our own office, causing the site to not load completely. Since my webhost has adjusted the firewall settings and the site load very well now. It turns out that the problem began minutes after we downloaded news that we had designed in Muse. So, our first thought was that we had damaged our Muse file somehow. But thank God it was a firewall issue instead.

  Nitin and Zak thanks for your help.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• BlackBerry smartphones < my blackberry lost day and time when connect you the bb to computer!

  Hi, my lost bb day and time when connect bb to the computer, the change time bb and another area, it is normal?

  My phone says dealer "it's normal in this smart phone" is really true?

• Some of my Outlook (hotmail) files are missing when you use Firefox

  When I use Firefox as my browser for my Hotmail e-mail account (Outlook), for the first time this afternoon, some of my personal folders in the left column are missing. But if I use another browser such as Google Chrome or IE9, the files are all there.
  The specific files that are missing are subfolders in the personal file, I created and named trip.
  How can I get them back so that I can continue to use Firefox?

  Therefore, I would appreciate your help.
  Thank you very much in anticipation

  Anthony

  Hi Anthony,.
  If you refresh the files Panel in Firefox or if you search for them, the folders appear actually?

  This occurs after you clear the cache and cookies? Mode or safe mode? Questions to troubleshoot Firefox in Safe Mode

  If you open the developer tools Web console, the folders appear in the html code of the page?

  If the problem persists, please file a bug in the webcompat.com where all the bugs of compatibility were studied.

• audio.ar file is missing when install Midtown Madness

  Hello!

  I just got a copy of Midtown Madness Chicago edition, but I have a problem when I try to install it, I got this message Microsoft games\midtown madness\audio.ar is missing

  If I get this message the game installed fine, but when I tried to play it starts very well, he has shown the main menu and all when I chose any type of race he showed the page load then crash to desktop.

  Also, I installed the XP patch but nothing works.

  I don't know what to do or where I can find this missing file.

  Thank you for your help

  Javier

  Hi Javier,

  Please write us with the following details so that we can better help you.

  (1) what is the exact full error message you get?

  (2) is the issue limited to play Midtown Madness Chicago?

  (3) how you try to install the game? This is a disc to install the game?

  I suggest that you contact the support Microsoft Game. You can use the information in the link below.

   

  Support for common issues of PC games

  http://support.Microsoft.com/ph/7745

  Email us if you have any further questions. We will help you to come.

• AutoPlay does not illuminate when connect you camera

  original title: AutoPlay

  Hello! I have a problem with a camera Fuji Finepix J12 and is that when I connect the camera to the PC via the USB of the PC bleeps port as if he found something being plugged, but no AutoPlay appears and there is no sign of the drive in my computer. If I Plug one of my readers, flash etc. they show all with Autoplay and show in my computer. So annoying because it seems like this device which is the problem, but it worked OK in the past. In the AutoPlay list Finepix J12 watch. Help, please

  After turning on the camera and pressing the button for approx. 1 second reading, that the PC should recognize the camera automatically, Fuji FinePixViewer should start automatically if it is installed and load photos window is displayed, otherwise you can try to uninstall and reinstall the software, please refer to your manual.

  When there are a lot of images stored in the memory card, it takes time to display on the screen of your PC. In addition, it may take some time to import images or you may be unable to save pictures. In this case, use a picture memory card reader.

  I hope I could help

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• To display user-defined message when connect you to oracle

  Dear all,
  
  I display a message when the connection or connect to oracle Sql more why I created following pl/sql block.
  
  declare
  ls_global_name varchar2 (4000);
  ls_user varchar2 (30);
  Start
  Select global_name
  in ls_global_name
  from global_name;
  
  Select user
  in ls_user
  Double;
  
  ls_global_name: = ls_user | '@' || ls_global_name;
  dbms_output.put_line (ls_global_name);
  end;
  
  Above block display username@database name: SCOTT@TEST_DB:
  
  This messaes I want to display during each new session connection.
  
  Could you please suggest me for what I do.
  
  
  Waiting for your valuable comments.
  
  Thanks in advance:
  
  Vinod Gupta

  Hello

  If sqlplus starts, it searches files glogin.sql and login.sql. Glogin.SQL must be in $ORACLE_HOME/sqlplus/admin then begins as the connection is established. After that, there is the call to login.sql. This file must be output in the current working directory or in the path given by the variable SQLPATH.

  If both can be used.

  a flie content can be

  / * Start script * /.
  Set serveroutput on

  declare
  ls_global_name varchar2 (4000);
  ls_user varchar2 (30);
  Start
  Select global_name
  in ls_global_name
  from global_name;

  Select user
  in ls_user
  Double;

  ls_global_name: = ls_user | '@' || ls_global_name;
  dbms_output.put_line (ls_global_name);
  end;
  /

  / * End script * /.

  Maybe instead of through dbms_output display, you can set the sqlplus prompt using "set sqlprompt ls_global_name.

  Take a look at the users guide SQLPLUS documentation: http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch3.htm#sthref775

  Herald tiomela
  superconsult.nl

• Satellite Pro M50: Lobos SkyMe internet phone will not be installed when connect you

  I would welcome suggestions for a USB problem.

  A Lobos SkyMe internet phone will not install when it is connected to a USB port, but will install when plugged into my Shuttle PC.
  Historical precedents with the USB ports on this Satellite Pro M50, I'm pretty much at my wits end.

  Apparently, no driver is necessary, but I wonder if there is a registry hack to force recognition?

  Hello

  Could you describe in detail what does not work? You get an error message?

  I m not an expert in internet phone installation and didn t install similar devices in the past, but I imagine that the phone should recognize the new plugged the USB with no problems.

  If there is a problem with the USB device recognition go to Device Manager and remove all the controllers and the USB ports.
  Reboot the laptop.

  After that process, the operating system installs the ports again.
  Then you could try to connect the external USB device to the laptop USB port.

  PS; to make sure that the USB ports will provide enough power, you must disable USB energy saving properties.