Backup Recovery Wizard will not work

Similar Questions

• Windows 7 recovery disk will not work!

  OK, so I have a laptop Compaq Presario CQ61 with windows 7 64-bit, and it crashed a few weeks ago. I was told to fix it I would need to order the recovery of best2serve discs so I did and they arrived yesterday. Although earlier, I tried to grab the laptop and disks do not work, I set the BIOS to make the player load first, and everything that happens is a small comand window flashes up a gray screen is displayed with a chart of tape on it without any option for me too choose, and he stays on this screen forever.

  Can someone help me?

  Thank you, Kris

  Hello

  The reader at the link below must be compatible with your laptop and will offer a little more storage.  You might well be able to install a hard drive with a larger capacity, but this should be a choice course.

  http://www.Amazon.com/Western-Digital-2-5-inch-notebook-WD2500BEVT/DP/B001IKRKO0/ref=sr_1_1?ie=UTF8&QID=1297374178&SR=8-1

  I hope this helps.

  Best wishes

  DP - K

• Satellite P200D Vista recovery disk will not work

  The OS is screwed on this laptop and when I try to boot normally a blue screen flashes so fast that you can't read and it stops. I try boot in hosted HDD repair he said: "the installed program cannot start. Click OK to turn off the computer. The CD drive is broken so I source and cd-rom external and started up the Toshiba restore disk. Who gets however that

  Waiting for ODD vacancies
  E ODD drive ready
  Check for support in the E: drive...
  /

  Then it basically crashes for this. Any ideas? Thank you

  > Any ideas?
  Swap the optical disk drive and you will be able to use the recovery disc. You can get it on eBay and it is not so expensive.
  I fear that external device is not correctly recognized and there is no access to recovery media.

• My Troubleshooting Wizard will not work what can I do

  my assistant wireless says it has stopped working and when I try to start my Troubleshooting Wizard for what anyone, it won't work.

  Hello

  This problem occurs with all the troubleshooters?

  Have you tried to launch another place troubleshooting services? You can launch the convenience of Control Panel, Action Center or related topic in help

  How about unchecking "Get help desk to update from the Windows online troubleshooting Service" and use only the local convenience store?

  Follow the steps mentioned below and check if that helps.

  Method 1:Run the System File Checker tool.

  http://support.Microsoft.com/kb/929833

  Method 2:Check the question in the boot.

  Follow the steps to perform a clean boot.

  1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  3. on the general tab, click Selective startup, and then clear the check box load startup items.

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  5. click OK and then click on restart.

  6. once the issue is resolved, please start the computer in normal mode with the text following steps below:

  7. Click Start, type msconfig.exe in the start search box and press ENTER.

  8. If you are prompted for an administrator password, type your password, or click on continue.

  9. in the general tab, click Normal startup.

  10. click on OK and then click on restart.

  Method 3 :-> Open IE and go to Tools Internet Options-> advanced
  Uncheck the option - Check for server certificate revocation

• My Favorites are gone and I can't make new bookmarks. I tried to restore their by clicking on the backups and downloading Backup and neither will not work.

  This is as far as I know. I followed the instructions to restore and nothing works.

  See also:

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Install Wizard will not work with itunes?

  I bought an ipod64, downloaded the driver for itunes, tried to 'sync' my new ipod.  Computer error said that the windows installer could not be accessed?

  Did you install the driver or just download it?  It must be installed.  There may also be other software that must be installed.   Is there (and I think it's the case), then right-click on the installation icon and click on run as administrator.  The fact that the system wants windows install to run suggests something is missing still to make synchronization of function - but I don't know what you were doing, so I don't know what to think.  It seems that some software is still missing (they list software on his support below page) or you need a version update of iTunes, or you have installed the software and driver for the wrong operating system, or.

  Here is the support page for the iPod64: http://www.apple.com/support/ipodtouch/.  If your answer is not there (and I couldn't find it), then try to contact them:http://www.apple.com/contact/ (you get a free incident within the 1st 90 days of purchase).  They should be able to help get the installer because they know that their products and programs better than we.  This looks more like a problem of configuration or software Apple as nothing to do with Vista.

  I hope this helps, or that they are able to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sysytem Recovery will not work

  I have a HP Pavilion dv6000 and I want to do a system restore but it starts just as usual when I try to press F11 at startup (sometimes it beeps even this hard if I keep on pressing it permanently) and when I try to do this in the menu start by going to start - all programs - Recovery Manager - Recovery Manager - Advanced Search - System Recovery - Next

  then it restarts just my computer and it starts as usual, I have no propmts for something else. I considered getting the recovery disks online but I'm afraid that they do not work if the Recovery Manager does not work. I have a feeling that I put the disc and nothing will happen, just like with the Recovery Manager.

  What should I do next?

  Order your set of HP. They must work even if F11 not because you start from them.

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• The Acer recovery management will not run on switch 10

  By the switch of my Acer 10 owner's manual, there are steps proposed to "create a backup recovery" and a "driver and application backup. But the Acer Recovery Management will run. When I click on Acer recovery management application, I get the screen of the security clearance. I click on "OK" to continue. Nothing happens. I tried several times. I also tried to run as an administrator without success. I have a 32 GB flash drive ordered. Is the flash drive must be inserted into the switch 10 for the application to run? If not, what am I doing wrong

  You must insert the USB pen to perform recovery management, either by the way, if the Acer recovery management does not work, you can use windows built-in recovery.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• Model bag Clickfree Automatic Backup Device HD325 does not work in the Windows XP computer.

  Original title: BAG Clickfree Automatic Backup Device model HD325

  Cannot use the automatic backup device model Clickfree BAG HD325 on Windows XP.  It's a plug-and-play device.

  I tried to pass by and update the driver, but the wizard tells me there are no newer drivers available, and when I try to restore the driver tells me that there is no previous driver.  The USB port works properly and is the reading device.  I also tried to uninstall and reinstall the driver by using Device Manager, and the camera will not work properly.  The taskbar has said it malfunctioned, impossible to install correctly. and won't work properly, but after fiddling around by using the methods mentioned above, it says now that it is installed and ready to use, but the program does not start automatically.  I've been through to try to start the program manually, but it is not listed in the start menu or desktop.
  I also tried to add material using add new hardware, but it's not listed there either.
  I was able to use this program in the past, why I am no longer able to use this device?

  Hello

  You are able to use any other USB device on your computer?

  You can follow this link & check if the problem persists:

  USB port may stop working after you remove or insert a USB device

  Hope the helps of information.

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to import bookmarks multi-level IE 8 FireFox 17 if IE 8 is broken, cannot re - install and will not work?

  IE 8 is still installed, but will not work. I can not install any version of IE - I tried. I can import only first level bookmarks. Solutions in the forum assume IE 8 work.

  If you have problems with importing IE bookmarks in Firefox, then export favorites in Internet Explorer to a HTML file and import this file in the Firefox Bookmarks Manager.

  If you don't have the menu bar in Internet Explorer, and then right-click on the toolbar above to activate the menu bar.

  • Export Favorites in Internet Explorer to a file (bookmarks.html) HTML:
    File > import and export
  • Import HTML file in Firefox:
    Bookmarks > show all bookmarks > import and backup > import bookmarks HTML: file

  See "Import from another browser" and "import from file":

  • http://KB.mozillazine.org/Import_bookmarks

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.