Model bag Clickfree Automatic Backup Device HD325 does not work in the Windows XP computer.

Similar Questions

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• My colleague his computer was broken, it was Pentecost CS5.5 Pentecost installed upgrading pakket. now, I got a new PC I took me 3 days to discover that CS5.5 does not work on the windows 8.1 folks even 2 of the cat cant tel me that. now, I have installed

  My colleague his computer was broken, it was Pentecost CS5.5 Pentecost installed upgrading pakket.

  Now, I got a new PC I took me 3 days to discover that CS5.5 does not work on the windows 8.1 folks even 2 of the cat cant tel me that.

  Now, I have installed they pc new windows 7 of the Pentecost CS5.5 so should work on that. but after the installation of the upgrade CS5.5 does not show my CS5.5 pakket now I can't upgrade. and the last time it was Pentecost bij adobe support fixed a remote session bij adobe. now that?

  Problem solved by generating a new serial for Photoshop CS 5.5 key

  ~ Sarika

• printer does not work in the windows machine 8

  my printer does not work in this new machine of windows 8. tried everything to fix the problem. It won't send email documents to the printer either. just doesn't get it. Ive had kodak install drivers, and just, it will not work on this computer. It was fine on windows vista. the printer is set by default on this computer, then why it wont work on this one. not happy with windows 8 at all. wish I never bought it

  Hello

  As Kodak OEM is responsible for the good operation of the printer and their
  drivers provided. Check their documentation online, with the support of Kodak, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Kodak - printers
  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvc2VsZWN0ZWQvdHJ1ZS9jaGFuZ2UvdHJ1ZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu/change_country/true

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP SimplePass does not work except the windows log on screen

  Hey,.

  When I bought this pc, it is Windows 8. I've updated my pc to the latest version 8.1 of windows. After the first update SimplePass stopped working on all browsers except Internet Explorer. He stopped work on the login screen too. But for some reason he started working on the newspaper on the screen all of a sudden. I contacted HP through chat support. They said that SimplePass is designed to work only with Internet Explorer. Other browsers may work or not. It is very good. According to his (Agent HP) SimplePass still works.

  But after the SimplePass update stopped working completely except the login screen. I click on the icon SimplePass... no answer... I slip on the fingerprint reader... nothing happens. But the computer only works on the windows login screen. Below is my current pc info. I think that HP must update SimplePass.

  Operating system: Windows 8.1 64 bit (version 6.3, 9600) (9600.winblue_gdr.140330 - 1035)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  System model: HP ENVY 15 notebook PC
  BIOS: F.56
  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 8192MB
  Available OS memory: 8124MB RAM
  Page file: 2859MB used, 6544 MB of available space

  Sharif Tamim

  Hello Sharif_Tamim,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not able to operate SimplePass properly, and I'd be happy to help you in this case!

  The most recent version for SimplePass can be downloaded to your system by following this link: updated HP SimplePass Identity Protection Software .

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• printer does not work in the windows photo gallery only

  My printer works fine for everything except when I try to print something in the windows photo gallery, then it says printer is off line? any suggestions out there
  Thank you

  indoorairpro,
  Thanks for posting on the Microsoft Answers forum.

  What kind of printer do you have and which version of Vista?  The printer will really offline - the light on the printer turns off - or think Vista is it offline?  Do you simply what to start or if this printer has never worked with Photo Gallery?

  Try uninstalling and reinstalling the driver and software of the printer.  Make sure that everything is completely uninstalled, restart the system, and then set the printer upward according to the recommendations of the manufacturer (sometimes you have to connect the printer to the computer at a certain time during the installation process).

  If this does not work, try to reinstall the photo gallery once the printer is successfully installed.

  Let us know how it works for you and if you need further assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore does not work on my Windows 7 computer

  System Restore does not work for me on Windows 7 pro, he returns with a cancellation but does not either.  I have load a movie in movie maker and all the trouble started.  I couldn't finish the loading of the movie at that point, I started to have problems with the operation of windows.  End result, I tried restoring the system without success...

  Hello

  1 are you getting any error code or error message?

  2. have you successfullyperform before system restore?

  3. have you made any change before this problem?

  I would suggest trying the following steps and check if it helps.

  Step 1: search for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 2: check if you are able to save the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Step 3: security software temporarily disable and check if it helps.

  Disable the anti-virus software in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: After reviewing the matter, must reactivate the security on your computer program

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Sebastian M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• AoE3 does not work on my Windows 7 computer

  AoE3 and the expansion of the WarCheifs used to work perfectly on my Windows 7 computer, but recently, when I try to run the game, it begins to run (Ocwa logo appears on the screen), but then Windows tells me that it was an error and the program must close and just takes back me to my office. I already tried to uninstall and reinstall the two programs (and install the patches available on the Web site of the AoE), but it still does not work. What happened and how can I solve this problem?

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any antivirus installed on the computer program?

  2. are you aware of any recent software or hardware on the computer changes?

  You can update the display drivers and check if it helps. You can also try to run the game in compatibility mode and check.

  If the problem persists, you can start the computer in a clean boot state and check if it helps. Clean boot helps eliminate any conflict of third party software.

  Check if you are able to run the game. If the game works well if you have some incompatible software that could be causing the problem.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• I just bought the wireless desktop 800 Windows keyboard and mouse it does not work on the Windows XP desktop

  I just bought the wireless desktop 800 Windows keyboard and mouse. It works fine on my Win7 laptop but not on my XP desktop even if it says it is compatible with XP. Any advice?

  Hello

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  You cannot use the Wireless Desktop 800 keyboard and mouse.

  The problem may occur if the devices are not detected.

  What exactly happens when you try to use the devices?

  A fixit could be used if the devices are not detected.

  See the site:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Fingerprints does not work with the windows logon

  After you have uninstalled a few bad software in my HP Pavilion m6 - 1045d with imprint willnot work plus sign. I tried to reset and retype the password for windows, but I keep receving an error that the password does not match.

  How can I solve this problem?

  I did some research and found this thread. You can try to restore your computer to an earlier dateand see if that helps?

  Please let me know,

• Why installed Photoshop 10 does not work on my Windows 7 computer?

  I got Adobe Photoshop Elements 10 installed on my Windows 7 machine.  Had to wipe the hard drive and reinstall everything.  Elements installed without problem, but does not open.

  uninstall,

  Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html

  then reinstall.

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• Equium A200-1AC - Hotkey Utility does not work on the Windows XP Home edition platform

  Why fail HOTKEYS Utility 0.49.2.1C on Windows XP platform?
  Please help me!

  Hello

  already tried this address:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  If so, then try the Canadian site, they sometimes pilots who aren´t on the European site:

  http://209.167.114.38/support/download/ln_byModel.asp

  Otherwise give some feedback so that we can find another solution...

  See you soon

• LEGO chess game does not work on my windows vista computer. It ran fine on windows XP. What should I do?

  LEGO chess game loaded without problem on windows vista, but whenever my son trying to play, it says: "Please insert the legochess CD-ROM into the CD drive.  The disc is already but it just repeats the message?

  PS: I am a shareholder of Microsoft and so disappointed with Vista.  Give me XP!

  Try this link. There is a patch to correct this problem by the creators of this software.

  http://support.Selectsoft.com/products/L/LNLEGCHESJ.htm
  (Copied from above link)

  Question	I try to run the program, but a message "insert disk" always comes to the top. The software seems to be installed correctly.
  Description
  Solution	We have a patch for the failures of Lego that should solve the problem of "no CD in the drive". It is currently available for download on our site here: chesscdfix.exe