Backup via USB in windows 8.0

Similar Questions

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• BlackBerry Smartphones unable to view the files on SD card via USB on Windows PC

  I am a new PRIVATE owner (increased from Z10) and I can't seem to view the contents of my SD card on my WIN10 PC when it is connected via a USB cable.

  In fact, none of the content on the PRIV are displayed on my WIN10 PC when connected via USB.

  I installed the USB driver on the BlackBerry site, formatted the SD card several times installed solid Explorer file manager and the solid grip explore USB OTG.

  When I connect to my PC WIN10, I can see the folder "Blackberry STV-1000 ' pop up, but the content of the files folder is empty - with none under folders displayed - even if there is a"Music"folder on the SD card.

  I would like to see/transfer files to my PRIV connected via USB to my PC.  Why is it so difficult?

  Thank you
  Herb...

  Problem solved...

  I noticed that after plugging in the USB, you have to swipe down with one finger... noticed the 'connected in charge mode' and you select 'file transfer '.

  It works now!

  Bab... a lot of research to do this simple task is coming!

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• Recovery Manager, you want to do a backup via USB no drive

  USB instead of disc using dvd - R, will not let me proceed .i want to make a copy, so if I have problems I can fix my computer. Using Recovery Manager

  Hello

  There should be few options and you can select DVD or USB. Please read the following instructions:

  http://h10032.www1.HP.com/CTG/manual/c01662115.PDF

  Kind regards.

• Cannot synchronize Centro via USB in Windows 7

  Hi, I just installed Windows 7 Home Premium 32-bit (clean install). I had already used Vista and could synchronize perfectly. My sync freezes 2 or 12. The strange thing is that there are two instances of 'Agenda' listed in the hotsync window. Also two each "address book, 'To Do List' and 'Notepad'.

  I installed Palm Desktop 6.2 I just downloaded on Palm.com. After you run into trouble, I followed some elements troubleshooting on the Palm support site. I uninstalled Palm Desktop and reinstalled, but got the same thing.

  I think the problem is the reader. When I look in Device Manager, I get a little gray question mark next to the device. Not sure if that's a problem. I tried to reinstall the driver by clicking 'Update Driver' in Device Manager and pointing to this filepath: C:\Program Files\Palm\USB_Driver. He said in very well installed, but then I always get this gel when you try to synchronize.

  Help!

  

  Fixed an issue with the help of tech in this thread.

  It turns out it was a corrupted date book entry and had nothing to do with Windows 7.

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Satellite A210-133: how to install Intel or via controller usb on windows 7

  Hello!

  I have a toshiba satellite a210-133 that I level to the 32-bit version of windows 7.
  All have been installed at the end, but I an intraoral machine that is connected by usb and it does not work properly.

  I questioned the manifacture of the machine and they said she wants an Intel controller or VIA USB to work properly.
  so I look at my computer\manage and I saw that
  I don't have this controller.

  Can you help me with this?

  Hi mate

  To be honest I m not very well what USB controller you mean exactly.
  The phone supports common USB 2.0 ports.
  Windows 7 provides own drivers USB of Microsoft, who controls this USB 2.0 ports.

  If the n t USB ports work correctly, then you should check if you need to install the chipset driver.
  Usually such driver chipset on the chipset manufacturer page.
  As far as I know the laptop uses the chipset AMD M690V (name of code RS690MC + SB600)
  So check that.

  In addition several devices needs a 3rd USB driver clean.
  I put t know if you intraoral machine needs these drivers, but I think that the manufacturer of this device must know this. So if you need this driver, please get in touch with the manufacturer of the intraoral machine to get this software.

• My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

  My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

  Hello

  Put it in a bag of rice for a few days or more. -seal the bag.

  If you remove all the moisture, it shouldn't affect the USB ports if nothing is
  possible. Usually it is not a problem if the moisture is removed.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?

  I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?

  Hello

  The question you posted would be better suited in the TechNet Forums. I suggest you to send your query to the TechNet forum for better support.

  TechNet > Windows Server Forums > management
  
  

• How to install Windows XP on my NetBook via USB

  Can you tell me how to install Windows XP on my NetBook via USB as there is no CD to my Samsung N100 NetBook?

  Go to the Samsung's Web Site, click on the "Support" link and find/download a manual for your computer.  Somewhere in the manual (sometimes in the appendix) the procedure of installing Windows XP on your model will be explained.  However, having said all that, my bet on the response from Richard Harper and you will probably have to you beg/borrow/steal/buy an external USB CD-ROM drive.

  HTH,
  JW

• HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

  Hello.

  HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

  But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

  Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

  During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

  Anyone know how to make LJ1200 to be redirected in a remote desktop session?

  Thanks in advance.

  For more information, here are 2 possible solutions:

  1. put two computers in the same workgroup and then share the printer and install from the remote computer.

  2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

• OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

  After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

  Launch the center of solutions results in:

  HP solutions Center can not run because your device installation is not complete.

  Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

  I clicked the help button.

  1 said to confirm that the device is connected and powered. Click back to try again. No luck.

  2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

  3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

  Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

  I'm now able to print, despite the above experience.

  Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

  Does anyone have a solution for this?

  SOLVED.

  Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

  A later version of the software is available for this product.

  After downloading and installing, he recognized my USB printer connected and completed the installation.

  Now, I can scan.

  Panel, programs and features shows the version 14.0 rel. 6

  HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

• How to recover the administrator password in windows 7 via USB

  I have a HP netbook mini and need to how do to recover the administrator password in windows 7 via USB that we forgot and had to load itunes from another Iphone.

  Hello

  You can use a utility to reset as in the free sample on the link below - using another PC, this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K