Bad connection to laptops only

Similar Questions

• Network printer keeps losing its connection to laptop only

  I have a HP 2055dn printer that is connected directly to the port USB001 on a Dell Windows 7 SP1 desktop pc. This printer is on our network with limited access to a specific user. The printer is installed on the pc as the default printer and works great. However, the issue is with the Dell laptop Windows XP SP3 to users that is connected to the network and also has access to the same printer. The printer is set up on the laptop and, sometimes, it works very well and it is sometimes impossible to connect to print. It doesn't matter whether or not it is defined as the default value. The driver is updated. There isn't any manually installed on the printer IP address, nor I see that the IP address of the printer is connected to on the server directly from computers to change a port setting. We use Windows 2003 server and do not have an internal network administrator.

  After making the foregoing I check the devices and printers on the Win XP machine and the HP2055 is listed but still displays "unable to connect". When I check the port for this device settings, it says:

  Port: USB001

  Description: Virtual USB Port

  Printer: HP LaserJet 2050 PCL6 of series

  If the port on the laptop computer Windows XP appears as "USB001", this means that the laptop would expect to find the printer physically connected to one of its own USB ports.  This isn't where I understand that you have the attached printer.

  Unless I'm totally confused about your configuration (always a distinct possibility), you have the printer physically connected to the Windows 7 desktop.  You want to be able to access the printer from the laptop XP over the network.

  I guess that you can share files between the Windows 7 Desktop and laptop computer Windows XP.  If you can't share files because you have not properly configured the network permissions, you will not be able to share the printer either.

  On the Windows 7 Desktop, go to printers and devices, right-click on the icon for the HP 2050 and select "printer properties".  Click on the "Sharing" tab  Boxes for 'Making the printing on the client computers' and 'Share this printer' must BOTH be audited.  Make a note of the name in the "Share name" box (this should be a name relatively short no spaces and no special characters, something like HP2050 would be nice).

  On the desktop of Windows 7, click right my computer and select Properties.  Make a note of the name of the computer.

  Because the instance of the printer currently installed on the laptop Windows XP expects to find the printer on the USB port, you must install another instance of the printer on the laptop.

  • Go to printers and faxes, and start the wizard to add a new printer (click on add a printer)
  • Click the radio button to add "a local printer attached to this computer.
  • Uncheck the box for "automatically detect and install my Plug and Play printer."
  • Click next
  • Click on the radio button to "create a new port".
  • In the drop-down menu, select "Local Port"
  • Click next
  • In the "Enter a port name" box, type the following command and click OK
    \\COMPUTERNAME\Sharename
  
  where "COMPUTERNAME" is the name of the computer in Windows 7 that you noted above and "Sharename" is the name of the sharing the printer configured on the Windows 7 computer
• Run the wizard, add a new printer as usual.  If a message appears saying that a driver is already installed for this type of printer and you ask if you want to reuse the driver installed, answer Yes.
• When you get to the step of naming the printer, add something on behalf of so that you will know that this instance is one that is installed on the Windows 7 computer.  For example, if your computer name is DELLW7, you can name this printer 'HP2050 on DellW7.
• After you have confirmed that this system works reliably, you can delete the icon for the same printer in the screen of the laptop computer printers and fax machines (unless you sometimes actually want to connect the printer to the USB port of the laptop).

• I hear my laptop only, when I am connected to my TV via HDMI.

  Sound game

  
  
  I have a problem and now I have this laptop and I connected it to my TV via the HDMI cable and I get sound from my laptop only.

  What I need to do for my settings in my Panel on my laptop...

  I have the picture but the sound only comes from my laptop. I can't seem to get the sound as well as the T.V...

  What and where in my settings I do... ? ? ? ?

  
  

  ... I have the picture but the sound only comes from my laptop. I can't seem to get the sound as well as the T.V...

  When I set up my phone to use my TV as a second monitor via HDMI, I had to install an HDMI audio driver before I could use the TV speakers system. You did not mention the brand / the model of the laptop, but I imagine it would be a similar problem in my DELL Studio 17.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

  Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Tecra Z50-A-14 t - bad connection WiFi signal

  In short.

  Absolutely the same problem with my new Tecra.
  Stable connection by cable.

  Bad connection same 3 5 meters from the router. If the distance is longer, or I use the laptop in another room sometimes it s no link at all.
  The card is Intel (R) Dual Band Wireless AC-3160 and that article how I found the link above.

  All electronic in the work of the House with no problem, but this piece of garbage to Wi - Fi only the same has even after 3 visits in the repair shop. And that s for new out of the box laptop.

  I really disappointed me.

  + The message was edited: link has been removed - forum rules +.

  Hmm. have you noticed the same problem of weak signal using the laptop to the power of the battery as well as connected to the adapter?

  My signal low similar knowledge questions may seem due BOF WiFi enabled power saving settings. This setting can be found in the current power plant? Advanced settings

  On the other hand, it might be possible that there is something wrong with the WiFi antenna cable. Maybe it is not properly connected to the mini PCI module

  In the case of changing the settings would not help you and if your already updated the Wlan to the latest version available, I think that the Toshiba certified maintainer should check the antenna.

• connect a laptop computer people visit to my desktop via the USB cord

  If I connect my laptop to friends to my computer via the USB cord so that she can get on the internet, if there is nothing wrong on my computer like a virus or something bad, he can go on to the laptop? And if I have a wireless router & it connects to the internet in this way, can get the same bad things in his laptop? I know that sounds pretty lame, but I don't have a laptop.

  First of all, it is doubtful that you could find a USB bridge cable to connect two computers, and even if you did, it would be difficult to configure things to enable the second computer to access the Internet.  (But see http://www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248)

  The good way to share your Internet connection is using a router (wired or wireless, any - except convenience).  But it is certainly possible for the virus to spread on a network, it is unlikely as long as each computer has an antivirus application to update and Windows Firewall (or a good third party firewall) is enabled.

  If you don't want to buy a router (and note that a router is very good for you security protection even if you only have one computer), you can connect the two computers with a cable 'cross-over' (a special type of cable Ethernet) and of XP Internet connection sharing.

  If you wish, you can disable 'file and printer sharing' on computers or both to further isolate them from each other.  Details vary for different versions of Windows.  Here's how in XP: http://compnetworking.about.com/od/windowsfilesharing/ht/enable_disable.htm

• Help! I cannot connect my laptop to my tv via a vga cable.

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  =====================================
  I don't have a specific answer to your question, but I have recently
  had a similar problem with a connection "svideo to RCA cable.
  and the solution was to change the computer of
  resolution of the screen to a lower number. Also... I had to open
  nVidia control panel and select Clone. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Does not work.

  Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Louise South,.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you to uninstall the software and reinstall it from the link below.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if the problem is resolved.

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• bad connect to Sql * more via command and cannot log on to the designer (need for connection string)

  I installed Oracle Developer with success, but having bad connect to Sql more than command line, also unable to connect via the developer tools, I get a TNS: Connect timeout occurred. This happens also for the "Plus" Sql for Windows.

  

  
  

  However, I can connect via the Sql Plus command window when it is executed from "Start-> all programs", but not when I first run the command window:

  

  
  

  I have a good Oracle 11 g install on Windows 7 and a good developer Sql install so I can connect to databases, but something does not work when you try to connect through these tools. Although Sql Plus works when called from 'Start-> all programs'
  

  sqlplus scott/tiger - don't use SQL * Net, you can connect like this even with the listener is stopped.

  Developer SQL can ONLY connect using SQL * Net & can be blocked by the firewall

  to connect using sqlplus & SQL * Net, you need to invoke it as below

  sqlplus scott/tiger@orcl

• Bad connection variable

  Hi friend
  
  I don't want to use a trigger to update a value of varchar2:
  
  create or replace trigger WORK_STITCH_NAME_TRIG
  after insert or update on ASS_WORK_STITCH
  for each line
  declare
  NAME VARCHAR2 (100);
  Start
  If the insertion
  Select ENAME in the NAME of UAMRIS. WORDER where OID =: new. OID;
  Update UAMRIS. WORDER
  Set ENAME =(:new.NAME)
  where OID =: new. OID;
  end if;
  end;
  /
  
  but it gives me error like ': New.Name' variable of bad connection.
  
  Can someone help me with this please!
  
  Thank you
  
  Zitouni

  : OLD /: NEW applies only to the trigger of the columns of the table. Your relaxation is on table WORK_STITCH and the NAME is variable PL/SQL. Simply remove: NEW:

  create or replace trigger WORK_STITCH_NAME_TRIG
  after insert or update on ***_WORK_STITCH
  for each row
  declare
  NAME VARCHAR2(100);
  begin
  if inserting then
  select ENAME into NAME from UAMRIS.WORDER where OID=:new.OID;
  update UAMRIS.WORDER
  set ENAME=NAME
  where OID=:new.OID;
  end if;
  end ;
  /
  

  SY.

• 39L4333DG will not connect to laptop WiDi - timeout

  I'm tempted to try to get the WiDi to work.
  First of all: TV is updated to the latest version via autoupdate.
  Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  I can detect the TV, I can try to connect. Laptop request PIN, the PIN is displayed on the TV.
  TV says then connects, so it is portable. After a while (like 30 seconds) the TV said that there was a timeout. Laptop keeps trying to connect for a few seconds more and that's it.

  Any idea what the problem might be?

  > Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  First, please check if computer laptop supports WLan Intel WiDi appropriate card.
  Where it is, you must update the Intel WiDi software.

  Here, on this page from Intel, you will find the required software from Intel:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031109.htm

  You must update: Intel®, Intel® Wireless Driver driver.
  Need to install the latest version of the software Intel WiDi and other Intel WiDi Widget

  I hope this helps!

• Equium A100-147: can I connect my laptop to my desktop hard drive?

  My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

  I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

  Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

  I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

  Any help would be greatly appreciated.

  Thank you

  Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
  Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

  If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

• How to connect my laptop seconded to the display of lightning?

  How to connect my laptop spare Windows PC to the display of lightning?

  It doesn't seem likely... this thread explains a little bit problems > http://apple.stackexchange.com/questions/181277/connect-a-thunderbolt-display-to-windows-8-Bureau

• IAM trying to connect my laptop to my TV using a cable video. s, but I can't do now.i once before, but I think that I went somewhere and cloned it .anybody me help please jack

  trying to connect my laptop to my TV can't do it now, I did it once before, but I think that I went somrwhere and cloned it .can sume one help me pleas jack.      E-mail address is removed from the privacy * if we're cut off

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  It will be useful.