bad display-

Similar Questions

• Bad display on MX700 with 3 endpoints connected

  Bad display on MX700 with 3 endpoints connected | Telepresence | Cisco support community

  Hello

  We have 3 MX700 (two screens) with multisite license and tried a conference between the 3 sites, but we had a bad behavior on the third connected site...

  Assume the following:

  -Call of Site1 site2: site1 and site2 see on screens separated as planned

  -Site1 calls training3 to join them at the Conference and then here is the result:

  * site1 sees site2 and training3 on screens separated as planned

  * site2 sees site1 and training3 on screens separated as planned

  * training3 sees site1 and site2 on the same screen and the other screen is only usable for a common presentation or to see the local picture

  It was impossible for training3 to change the layout of the screen. The only thing was to move the image of the local camera on different screens, but it was impossible to see site1 and site2 on different screens. It's really annoying because it displays site1 and site2 small on the same screen.

  For more information on the 10 touch, the screen showing site1 and site2 was named by 'site1' name. As if the video stream only site1 calling, there is no mention of site2 anywhere.

  Can someone help us with that?

  Thank you in advance for your help and best regards.

  DCCP

  // // //

  If I understand correctly - the call scenarios your assumptions are incorrect. Only the MX hosting the call will be other ends remote on separate screens. The standard features of SIP/H.323 allowing for a live video stream, a second for the content. Cisco Telepresence Server is a feature called "multistream" which allows you to send more than a live stream, but not the multi-site integrated in the codec. The call - in your example one - site hosting site they can see sites 2 and 3 on separate screens because they are in calls with each of them.

  In your balls - if site called 1 2 and 3, only 1 site would see the two separately. Suggest site two, but it would be no less than two called 1 and 3 of the site.

  If the site called 1 2 and 3, site 1 would show 2 and 3 on both screens if there is no content, and they combine on 1 screen if it has content. Sites 2 and 3 would show only the handset (usually continuous presence) image on the primary and the second would remain turned off unless it had contained.

• Bad display on Satellite P200

  Hello

  My P200 under Vista has a terrible display, all the fonts are blurry and in general, the view is terrible.
  I tried to change the display settings of but nothing seems to make any difference.
  All of the suggestions.

  Thanks in advance, IanB

  I use the Satellite P200 almost a year now and all I can say is: use recovery media, install the original recovery image and be happy. I don't know how long you use your P200 and as you have driver display, but for your problem, I have three explanations:
  -You use some bad graphics driver
  -L' display is faulty or
  -You need glasses

  Please don't be crazy for my last comment. It has nothing with your person directly. I just wrote about my own experience. Satellite P200 has the glossy LCD screen brilliant (TruBrite) and using the standard display (1440 x 900) resolution image on the screen is quite clear.

• Bad display quality PDF - export to AutoCAD

  My goal is to effectively publish my drawings of the multi of AutoCAD Map to a single PDF file for e-mailing to my clients who do not have AutoCAD and want to open a PDF file on their device of choice.

  The file should look like it will print seen on the screen of the client with any what Viewer PDF (web or desktop) and it must have a sufficient resolution for printing on paper 11 x 17, without loss of quality.

  The problem I have is with my Appendix at the end of my output document pages.

  The appendix is made from the material data sheets (files to PDF in AutoCAD) and framed by my title block, and some PDF files appear badly on the screen. (Some of them display wrong but fine print, but is not a acceptable deliverable to my customer).

  Seems a perfectly good Source PDF for the last page of the manufacturer: http://Unirac.com/wp-content/uploads/BSK-PDF-Manager/6_SM-2703-CERTIFICATION_6.PDF

  If you zoom in you can see, it is a raster image, but there must be something not-so-good happening results to look so bad when the source is perfectly readable.

  Drawing attention to the last page where the problem lies:

  Here is a screenshot of the last page of this file read through the PDF of Google Drive Viewer: http://screencast.com/t/VeMOFeNNYjB

  This file was printed in the format PDF by using the command post of AutoCAD LT 2015 on my mac with the latest OS: El Capitan 10.11.4

  https://files.Acrobat.com/a/preview/9cd47e59-ded0-470A-ADAC-6aed8cc10338

  This file was printed in the format PDF by using the command post from 2014 AutoCAD on my PC for Windows 10

  https://files.Acrobat.com/a/preview/c2ad141b-E1BC-4C18-A52A-fbe09537df38

  This file is 1/5th the size of that produced by my mac but still as bad the last page displays.

  To summarize:

  Question 1) 5 x greater PDF export from the Mac version of AutoCAD

  Question 2) terribly screen display of some PDF files when PDF raster sources are set in the AutoCAD file.

  I won't pretend to know if this is a bug with AutoDesk product or Adobe, so I reported the problem to the two companies.

  Adobe: Let me know if there is anything more I can give you to help you determine and solve this problem.

  I have downloaded and open the files that you pointed to.

  Observations.

  (1) none of the questions here are associated with Adobe products. With any component Acrobat PDF files were not created.

  (2) the file created from AutoCAD on Mac OS is entirely to 600 dpi color raster Imaging by using ZIP compression, on the other hand, the file created from AutoCAD under Windows uses text and vector where possible with compressed lossy JPEG raster images. This explains the huge difference in size (and ironically quality - the smaller file is better)!

  (3) the pages of http://unirac.com/wp-content/uploads/bsk-pdf-manager/6_SM-2703-CERTIFICATION_6.pdf are in fact images JPEG2000 compressed at 150 dpi with no text and no vector. Even if Adobe desktop and mobile software PDF has no problem with raster JPEG2000 images, various third-party viewers are not so robust. The artifacts you see via http://screencast.com/t/VeMOFeNNYjB are likely due to a weak implementation of JPEG2000. JPEG high quality or compression ZIP (Flate) would have eliminated this particular problem!

  -Dov

• Bad display in animated .swf skin

  Hello
  
  Captivate 2. I created some animations (exported as .swf) demonstration in Captivate, and I'm like animations import in another Captivate file. I used an appearance customized for demonstrations. All for the most part works very well in my files Captivate final until I import only a single .swf demonstration. When I import 2, the first demonstration appears with bad skin. I realized it was the problem (with 2 of these .swf files) after republishing the original demo file, re-import the file, copy slides with the demo file, nothing helps. Any ideas?
  
  Thank you
  
  David

  Hmm... If I publish the demo. SWF in Flash 8 format, playback of the skin controls display correctly in my container project. If I publish in Flash 6 or 7 format, I have the problem described above, and I can't find a way around - I think it's a bug.

  I hesitated to publish in Flash 8 (partly to cause this warning from Paul). Then I learned to keep the other Flash 8 SWF animation with my project... container file that for most defeats the purpose for me (or at least displayed other problems).

  Anyone else have any ideas?

  Thank you!

  David

• bad display wddm is not compatible with the vga adapter

  transparcency is horrible, wddm is not compatible with the vga adapter

  Hello

  1. who is the operating system installed on the system?

  2. do you get an error message?

  Method 1:

  Follow the link and check if the VGA card is compatible. Check if it helps.

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  Method 2:

  Follow the link below and install the drivers in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problem-with-windows-display-driver-model/a98ccf9a-da4a-465d-bc69-4d0e88470057

  Let us know if it helps.

• Bad display on reinstalling XP

  Put an older version of XP on a pavilion 753n. sys # p9852A. SER #[personal information]. Never has this unit in a business acquisition if no supoport disc. Reformatted on intall and the graphics are very bad 4 bits. Supplied with xp home, probably a costco model. XP pro is easy install but now it looks like the safe mode. Ideas? No driver Web site does seem to apply

  Here is the driver for the video, assuming that it always uses the onbaord graphics: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-28391-1&cc=us&dlc=en&lc=en&os=228&product=90390&sw_lang=

• Bad display of the printer

  Hello

  I installed the Canon MF8050 printer, but the printer does not appear in the "devices and Printer\Printers and fax machines. After a long search I found it in "Devices and printers\Devices" when I right click on the computer icon. Do you have any idea how to display correctly? The printer is set to the port "USB001: virtual printer port. When I change the printer port "USB002:Printer virtual port" seems normal but does not print.
  Thanks for your help.

  Hello

  You might face this question when the metadata of the appliance are damaged. I suggest you to follow the steps below and check if it helps.

  Method 1: Scan your computer for any Windows updates in the meantime.

  Click on the link below and follow the steps.

  What is Windows Update?

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check the question and proceed to the following method if you are still having the problem.

  Method 2: Uninstall and reinstall the printer drivers.

  Follow the steps below to open Device Manager.

  http://Windows.Microsoft.com/en-us/Windows/open-Device-Manager#1TC=Windows-7

  Locate the printer, right click on the printer driver and click on uninstall. Follow the instructions on the screen.

  Later, you can click on the link below and download the latest printer driver.

  Color imageCLASS MF8050Cn

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/color_imageclass_mf8050cn#DriversAndSoftware

  Write us to the State of the question, we will help you.

• bad display Desktop HP Pavilion dv7 notebook

  When I connect to the computer, I have red swirls grainy on my screen and my icons on the desktop all have a shadow on the right side of the icon is red.  My pages are now a beautiful blue color striped instead of white.  How can I fix it?

  Hi Kolodychuk,

  This sounds like a connector defective display to your laptop screen or a defective display.
  I advise to connect the laptop to a stand-alone PC monitor via VGA - if the desktop icons appear on the external monitor, then you know that there is no software based with your laptop problem
  Once you have the monitor plugged press F4 and then select "Duplicate" on the external monitor
  I then call the HP Support and take a picture of what is displayed on your monitor potentially defective - they should replace the screen for you if its still under warranty or re - connect the connector of the screen for you. If the issue is not on the screen of laptop computers and you will see the same problem on the external monitor then your GPU can be at fault which can also be replaceable if under warranty.
  Hope this helps
  Martin

• Bad display flashes display normal display black background.

  My screen flashes normal display for a background screen blacked out whenever I try to access different programs or select any site.

  Hello afneedshelp,

  I suggest that you update your video card driver. Go to your video card manufacturer and download the latest driver available for Windows 7.

  If this does not display, please reply and let us know.

  Thank you

  Marilyn

• Is this a bad display or the inverter? Or could it be something else?

  Pavilion dv4-1225dx Entertainment Notebook PC

  It is a LED display? State record: 14,1 "Diagonal WXGA high-definition HP BrightView Widescreen Display (1280 x 800)

   

  Original forum post with the video of the screen of the problem:

  http://h30434.www3.HP.com/T5/notebook-display-and-video/flickering-display-at-startup-but-stops-jump...

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  SOLVED

  First tried the best route, new inverter $4.89, but the problem persisted.

  Replace the LCD ($65,75) and the problem is solved.

• Bad display of the description of the object

  Hi all

  I have page responsibility Iprocurement page name and path is:

  / Oracle/Apps/ICX/por/reqmgmt/WebUI/ReqDetailsPG

  
  

  This is the request page and it contains two-piece 1 is part of the history of requisition and part 2 detail belongs to...

  
  

  In the detail part there is a table that contains the number of columns as line, description, by necessity, delevery - to and so on.

  In my case this special request to have 5 folders... In the detail table, that means show 5 lines, 5 description and so forth...

  
  

  
  

  My problem is with the Description column of the table in this detail

  This page after "ReqDetailsVO" and ItemDescription is the value of the attribute of this description column...

  "ReqDetailsCO" is this page CO...

  
  

  Now the question is when I click on copy on the shopping cart button, it goes to another page... / Oracle/Apps/FND/Framework/WebUI/OADialogPage

  This OADialodPage contains 3 buttons Cancle, add to cart and wagon again... In fact, it's a warning page

  
  

  When I click on new button basket, then it goes to the shopping cart page... This page contains a table that contains items in the shop...

  table contains columns like line, the item description, special info, unit and so on...

  Here she also have a record 5, but in the description of the article show other values... his watch is not the same value or description as my previous on the previous page ReqDetailsPG
  

  shows item description...

  
  

  This page shopping cart shoppingcartpg/oracle/apps/icx/por/req/webui/ShoppingCartPG the page number and the access path.

  Co: ShoppingCartCO

  VO:PoRequisitionLinesVO and view attribute: ItemDescription

  
  

  Now how to display the same description of the object on the page of ShoppingCartPG ?

  Can I track the CO extension method or what? and how?

  
  

  
  

  Thank you...
  

  
  

  
  

  Hi Sandeep... Actually I changed method to solve it... requirement is the same but the method has been changed...

  I close this and I raise thread for new requirement...

  Thanks for your help...

• Help. Bad display on a width of iPhone.

  I already have do web / mobile sites with Muse. But it's the first time since the CC.
  In addition, I wonder if there are not one bug?
  Impossible to view my full screen on an iPhone.
  
  I created a model MOBILE.
  I put my items (nothing not beyond of right or down)
  Et it does not work!
  See screen shoot MUSE et IPHONE.

  There is a bad width (width)
  

  Thanks for a response.
  

  

  
  

  ZAK, the problem, apparently, came from a background image damaged? Surprising, but I'm not. Because I removed it. "Png" who don't want to not open with any image editor.
  Now. It is ok.

  Thanks in any case.

• Bad display on IE

  Hello! I was wondering whats going on with that sit web http://www.poutinecentrale.com/ all the internet browser is very good even my phone android mobile... But that is to say, I outline bad everywhere. I tried to find it myself tried things fews but I don't know what to do anymore...

  1. This is the border around the images of Petite. IE adds pixels of the border width in pixels. Therefore, your small images are 4 pixels wide and 4 pixels high.

  2. as long as a solution, you could add in your page STYLE section: img {border: none;}. Since you have no external css stylesheet, you must add this code in each page.

  3. Why did you divide the big picture into strips? It won't load faster than a picture of unsplitted. Your table could look like this, without "spacer gif" 1000 - images.

  

  miss_marple

• Bad display in some sites

  Hello.

  After that I did a few Tune Up system with my vaio care about Firefox began to show me the sites such as facebook and tumblr like this:

  http://looseart.com.MX/1.jpg
  http://looseart.com.MX/2.jpg

  JavaScript is enabled and if I uninstall and install again, it remains the same

  Hello fernandoza,

  I'm sorry to hear that you are facing some problems with the appearance of Firefox.
  Have you tried our cache and cookies of compensation?
  For instructions on how to do this, see following bandages:

  • delete cookies
  • How to clear the cache

  If the problem persists after these steps, please try to refresh the pages several times, there may be a problem with the connection.
  The following support article can also help: Web sites look wrong

  If you still need help with this problem or if you have any more questions about this, please let me know in a response below. If you found this answer useful, please mark it as a Solution.

  Thank you for your valuable time and patience, as well as your interest in Mozilla Firefox. Surf safely and have a great day!

• Firefox 3.6.13: bad display on Windows 7, all Web pages

  All Web sites that I visit on my new system Windows Ultimate 7 x 64 missing most or all of its background and other colors.

  See:

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong