Bad_Pool_Caller blue screen on Windows 7 with SSD

Recently, I get a blue screen Bad_Pool_Caller when stopping down.  I read the other posts on the topic, but they do not seem to apply.
I checked all my drivers are up to date.  I have also run the Windows Memory Diagnostic and found no errors of memory.

Here's my minidump:
https://SkyDrive.live.com/redir?RESID=8AC14EFC220F227E%21309

I would be grateful for any help you can give me.

I don't know if it's related but one of the user profiles on my computer has been altered as recently and I had to fix the profile.

Looking forward to your answers.

CB

This was connected with NetgearUDSTcpBus.sys kernel USB software Bus by TCP.  Yours is 2 years and more.  I install the latest driver available or delete it (if possible)

Tags: Windows

Similar Questions

  • Blue screen of Windows 8 with various errors

    I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)

    The problems that I encountered:

    -L' computer would freeze with a screen colorful weird pixelated

    -L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)

    -L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)

    -system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)

    -"KMODE_EXCEPTION_NOT_HANDLED"

    -page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)

    -memory_management

    -IRQL_not_less_or_equal

    -kernel_security_check_failure

    -driver_overrun_stack_buffer

    All these problems have occurred during various tasks, never the same as the one

    - And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.

    I don't have any sort of installation dvd or windows dvd backup.

    I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.

    OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.

    Hello

    Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

    I suggest you try the steps from the following link:

    Resolution of errors blue screen in Windows
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Also check if there are errors listed in Event Viewer.

    Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

    To open the journals please follow the steps.

    Press the Windows key + W
    Type 'view event logs"on the splash screen and press enter.

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

    Hello
    I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

    Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

    Any guidance will be appreciated. Thnx Nick

    Hello

    If you meet this new,
    http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

  • crash blue screen of Windows 8

    I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.

    I would apreiciate if someone wants to help me.

    -Devil

    Hello

    Thanks for posting your question in the Microsoft Community.

    The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    • Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?

    • You get the error message? Please provide the exact error message / error code.

    I suggest you try using the methods below and check if it can help solve the problem.

    Method 1: Run the Safe Mode and perform a clean boot

    Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.

    Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.

    Click on the link and follow the steps in Start parameters of Windows (including safe mode)

    http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

    If the problem does not exist in safe mode, try to perform a clean boot and check.

    Step 2: Perform the clean boot.

    Reference: How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135  

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    If the problem persists I suggest you follow method 2

    Method 2:

    Resolution of errors blue screen in Windows

    Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

    IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.

    Hope this information is useful. Please let us know if you need help with Windows.

    Thank you

  • Equium A110-276: blue screen of Windows Vista error

    OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

    Anyone know the problem?

    I use Equium A110-276
    1024 MB OF RAM
    Core Duo 1.67 GHz
    Windows Vista Edition Home Premium

    Help please! THX

    Blue screen and Windows nothing unusual. Am I wrong? ;)

    Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

    Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

  • Unable to start - blue screen after Windows update

    original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

    Can not even go in safe mode

    Hello

    try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    If you can make the above change how you receive updates to find the update problem

    When right-clicking on it UAC prompt you hide it

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Choose one of these settings:

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

    The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

    Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

    AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

    Here is the link to the complete analysis of the dmp for details file:

    https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

    Thank you very much in advance for your help

    Moschtermeedchen

    AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

  • Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

    Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

    If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

    I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • Windows 7 blue screen 0 x 000000116 with nvlddmkm.sys

    Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [D:\MEMORY. DMP]
    The mini kernel dump file: only registers and the trace of the stack are available
    Symbol search path is: * invalid *.
    ****************************************************************************
    * Loading of the symbol may be unreliable without a symbol search path.           *
    * Use .symfix to get the debugger to choose a symbol path.                   *
    * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.
    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Could not load the ntoskrnl.exe, 0n2 error Win32 image
    WARNING: Unable to verify timestamp for ntoskrnl.exe
    ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Computer name:
    Core = 0 x 84403000 PsLoadedModuleList = 0x8454d850
    The debugging session: 12:52:48.258 Wed Aug 17 2016 (UTC + 08:00)
    System Uptime: 0 days 0:00:35.209
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.
    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Could not load the ntoskrnl.exe, 0n2 error Win32 image
    WARNING: Unable to verify timestamp for ntoskrnl.exe
    ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
    Loading the kernel symbols
    ...............................................................
    ..................................................
    Loading user symbols
    Mini Kernel Dump does not contain the list of discharged drivers
    Failed to load image dxgkrnl.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for dxgkrnl.sys
    ERROR: Module load completed but symbols can be loaded for dxgkrnl.sys
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************
    Use! analyze - v to obtain detailed debugging information.
    Error checking 117, {88 99008, 9153fed8, 0, 0}
    WARNING: Unable to verify timestamp for mssmbios.sys
    ERROR: Module load completed but symbols can be loaded for mssmbios.sys
    WARNING: Unable to verify timestamp for dxgmms1.sys
    ERROR: Module load completed but symbols can be loaded for dxgmms1.sys

    The kernel symbols are FALSE. Correct symbols to do the analysis.
    *************************************************************************

    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    WARNING: Unable to verify timestamp for nvlddmkm.sys
    ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    Probably caused by: nvlddmkm.sys (nvlddmkm + 13eed8)
    Follow-up: MachineOwner
    ---------
    1: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************
    VIDEO_TDR_TIMEOUT_DETECTED (117)
    The display driver did not timely.
    (This code can never be used for actual error checking).
    Arguments:
    Arg1: 88 99008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
    Arg2: 9153fed8, the pointer in the responsible device driver module (e.g. owner tag).
    Arg3: 00000000, the secondary driver specific bucketing key.
    Arg4: 00000000, optional internal context data dependent.
    Debugging information:
    ------------------
    The kernel symbols are FALSE. Correct symbols to do the analysis.
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.

    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    ADDITIONAL_DEBUG_TEXT:
    Use '! findthebuild' command to search for the generation of target information.
    If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.
    FAULTING_MODULE: 84403000 nt
    DEBUG_FLR_IMAGE_TIMESTAMP: 4fb2071b
    FAULTING_IP:
    nvlddmkm + 13eed8
    9153fed8?              ???
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_TIMEOUT
    TAG_NOT_DEFINED_202b: * unknown tag in the list analysis 202 b

    BUGCHECK_STR: 0 X 117
    CURRENT_IRQL: 0
    STACK_TEXT:
    WARNING: Information not available stack unwind. Sequence of images may be wrong.
    8eddcb30 91f765b8 9153fed8 00000000 88 69008 dxgkrnl + 0x81a5e
    8eddcb9c 91f7597e 00000000 00000001 88 99008 dxgkrnl + 0x825b8
    8eddcbbc 91fb192c 00000000 00000102 88 69008 dxgkrnl + 0x8197e
    8eddcc34 91fdb944 fffffcfb 00000000 0000075b dxgmms1 + 0x692c
    8eddcc5c 91fdc065 00000000 00000000 00000000 dxgmms1 + 0 x 30944
    8eddcc98 91fb88f0 8eddcc90 8443a50e 88 69008 dxgmms1 + 0 x 31065
    8eddcd28 91fdd3c9 69008 8443a50e 69008 dxgmms1 88 88 + 0xd8f0
    8eddcd3c 91fdd485 69008 00000000 88c09d48 dxgmms1 88 + 0x323c9
    88 69008 abfb2822 00000000 dxgmms1 8460cf5e 8eddcd50 + 0 x 32485
    8eddcd90 844b 4219 91fdd406 69008 00000000 nt 88 + 0x209f5e
    00000000 00000000 00000000 00000000 00000000 nt + 0xb1219

    STACK_COMMAND: .bugcheck; Ko
    FOLLOWUP_IP:
    nvlddmkm + 13eed8

    9153fed8?              ???
    SYMBOL_NAME: nvlddmkm + 13eed8
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    Nom_image: nvlddmkm.sys
    BUCKET_ID: WRONG_SYMBOLS
    Follow-up: MachineOwner
    ---------
    1: kd > g
    ^ No executable debuggees error in 'g '.

    Hello

    nvlddmkm.sys

    Seems Nvidia video drivers.

    Check with Nvidia Support, their drivers and documentation online and ask questions in the forums about known problems. Update video drivers. If there are no more recent ones it may be necessary to go back to an older stable version.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    --------------------------------------------------------------------------------------------------

    Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    We can analyze the minidumps if you make it available from the OneDrive or another file sharing of sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =========================================================

    BCCode: 117 0 x 00000117

    BCCode: 117 0 x 00000117<-- read="" this="">
    * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

    BCCode: 117 0 x 00000117<-- read="" this="">
    https://msdn.Microsoft.com/en-us/library/ff557271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

    Update the video driver - also look for the BIOS and the chipset drivers of low level from the system (motherboard manufacturer of custom systems) manufacturer.

    --------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Blue screen in Windows 7 Ultimate x 64

    I have a computer running Windows 7 Ultimate x 32 without any major problems. I recently installed 64-bit on the same machine as part of some hardware upgrades (more RAM and a 120 GB Revodrive X 2 SSD OCZ which takes place offline PCIe Slot rather than Sata). The only software I have installed so far is Windows (and updates)

    The system booted without problem the first time, but on the boots, I get a blue screen. I tried to remove the extra RAM, but it would not boot so my guess at this point is sort of a pilot about the conflict with the SSD.

    However, I can boot into safe mode with network. I didn't notice anything in the good registry (nor in the system and application logs). He mentions the restart but does ' t seem to say what caused it. I can't find the BSOD dump file or the other.

    I tried to contact OCZ and they told me that the SSD seems to work and it was probably a driver conflict has also suggested.  I do not know how to trace things any more away so I am currently in limbo.

    FYI - I find myself "solve" this problem by getting a new motherboard. He seems to have been a compatibility issue.

  • Equium P200 - XP has a blue screen after Windows XP Setup

    Please can someone help

    I installed XP (INSTALLED the DRIVERS SATA) successfully

    When Xp tries to start for the first time I get a blue screen of death (I can't read the content, because it's fast to)

    I've read that native sata must be disabled in the bios (no option for this in the bios)

    Cannot start in safe mode or any mode. Originally came with vista.

    Help, please

    Hello

    I don't really know what can be the problem but one thing can be interesting: you have installed Windows XP SP2 home edition?

  • Satellite U300-159 - blue screen after Windows 7 installation

    Satellite U300-159. I did a clean install of Windows 7 Home Premium 64-bit. Since the upgrade, it has blue screen every time you start after approx. 1 min. blue screen * STOP: 0x000000f4. The computer restarts it self after a while.

    I checked memory with 2 different programs. No errors. HARD drive checked - no error.
    Updated the BIOS, but get the error 1275 attempted using Toshibe updateprogram code.

    Anybody have ideas, what to do?

    Hey,.

    I m a bit confused about your ad first, you wrote that you did a clean install and then you wrote something about an upgrade
    What's true?

    Anyway, if you see the blue screen in safe mode too? If this isn't the case, it seems to be a driver issue because in safe mode no drivers will be loaded.

  • Satellite L555 - 10 M: blue screens in Windows, the system very hot, very noisy fan

    Hello

    Since yesterday my laptop shows a few Windows blue screens with the following values:
    (no value or empty)
    PAGE_FAULT_IN_NONPAGED_AREA
    PFN_LIST_CORRUPT.

    Some auto repairs were performed by start-Help/Systemstartreparation.

    After restarting the system in securitymodus and anti-virus disabled
    the following checks were made:

    (a) chkdsk c:
    The file system have been checked and no problem not found.

    (b) sfc/scannow
    Windows-Resourceprotection found no integrity issues.

    The system works only in time and
    After a few minutes, the laptop will be very hot and the fan works very hard
    the judgment of the work system,
    the mouse stop working,
    There is no activity on the disk system c
    the system shows reactions
    Finally appears with PFN_LIST_CORRUPT blue screen.

    Could you please help?
    Thank you.

    What did you do with your machine? do you have additional software installed or upgraded something?

  • 1E error blue screen on windows server 2008 r2

    Hi friends,

    Please help, I do face with blue screen error 1e, although helping to solve this problem,

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.274.10
    Locale ID: 1033

    More information about the problem:
    BCCode: 1e
    BCP1: 0000000000000000
    BCP2: 0000000000000000
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 274_3

    Files helping to describe the problem:
    C:\Windows\Minidump\112914-22651-01.dmp
    C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.SysData.XML

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    [Moved from the community centre of Participation]

    You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

  • Blue screen after Windows updates

    Today, I got 12 updates to Windows update under Vista (security and others for internet explore). I use the 64-bit version and I get a blue screen and start each update even when I try individually. This is not the first time...

    No one knows why this happens?

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

Maybe you are looking for