The installation of SP2 results in MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED

Similar Questions

• During the installation of SP2 (KB2656369) get 0x800706BE error message

  During the installation of SP2 (KB2656369) error 0x800706BE get tried restoring the system without success is - that someone has a fix for this problem?

  Hello

  Trying to download SP2 from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28

  You can install SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

  Don't worry about the text which says that these are network facilities, they work very well for standalone computers.

  Tricky

• The installation of SP2 fails to faultrep.dll

  Hi all, I'm unable to install SP2 for vista. usually, stops on step 2 of the installation. Then goes to black screen and scrolls files, stopping at faultrep.dll.

  Any help appreciated with gratitude

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ================================================

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034

• I get an error like 0 x 8003712 during the installation of SP2

  original title: I need SP1

  I just reinstalled Windows vista and lost all my files and updates, now I can get updates because you no longer offer SP1, try downloaded SP2 and I can't. You want users to upgrade to windows 7, but why should I pay 120 because you decided to not support any longer! What are the benefits for your customers who have VISTA?

  Then, we must assume that evil was done & run the removal tool cannot set now.

  I fear that your only remedy will be another format & clean installation of Vista. Melissa.

  See the poster in this thread and follow the instructions of (my) WHOLE (to the letter and in the order this time! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you. Good luck!

• Bad Windows product key during the installation of SP2

  Hi all, I have reinstalled windows XP.
  When I try to update SP2 to the system, mircrosoft told me that I do not use a product key.

  Then I followed the instructoin to download a tool of KeyUpdate and I put the product key in my laptop, it saids is not the correct key for windows I use.
  On-site product keys to compare, it says:

  OS version: Windows XP Professional
  Manufacturer: TOSHIBA
  Model: Satellite M60
  Product key: *-*-*-*-P6R2Y

  It shows the make and model.
  However, I use a Windows Xp Home Edition and this CD key is fine with *-*-*-*-Q6JWG.
  And the product key for my laptop is fine with *-*-*-*-GCFKM.

  Then I download the Windows product key update tool and put in both the product key on the CD and laptop.
  Two of them doesn't work. I want to know how can I update the Service Pack for my windows. Can anyone help? THX!

  What can I do for this? THX!

  Hello

  I read a few threads about similar problems with the BONE key and the key change has always helped
  Sometimes, Microsoft rates the key of the image as incorrect or not valid. Why? I don't know... it's Microsoft you know ;)

  Fact is that the key on the cover of the CD can only be used to activate the software Microsoft Works or OneNote installed on the laptop. The key is not responsible for the Windows operating system.
  The key that could be used with the Win operating system is placed at the bottom of the unit.

  Well, according to your message you used this key and now I m a bit confused
  I think you should make a call to the Toshiba authorized service provider in your country to clear this problem

• Error service there is no 0 x 80070424 on Vista 64-bit for the installation of SP2

  Hello

  I use a 64-bit version of Vista SP1. I am trying to install SP2, but in the end, it does not work. I have an error message that Setup could not install and this message: error service there is no 0 x 80070424. I also installed the file: Windows6. 0-KB947821-v4 - x 64 Windows and it I installed an updated but still can't pass under SP2.

  You have a solution?

  Thank you very much for your help!
  JP

  Hello

  read the answer given below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-0x80070424/6511a332-7de3-4F10-B823-49b6dae86b9c

  __________________________________________________________

  If this does not resolve the issue:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Satellite 2450-201 and the Installation of XP SP2

  Can someone tell me why I can't install SP2 on my laptop? I even tried using the original CD of Microsoft, windows, corrupt and does not have anything else to safe mode. I restored my PC and turned off the automatic updates as I can not on this problem. Why the Satellite 2450-201 does not support XP SP2? (I read this on the Toshiba site)... PLEASE HELP THIS IS SO FRUSTRATING

  Post edited by: Fiona Baker

  Hi Fiona

  I really put t believe that the installation of SP2 is not possible (not supported). Can you please send the link of this page?

  I have installed SP2 on older models that your without any problem. Can you please explain what exactly happens when start the installation of SP2?

  If you want you can preinstall your device using the recovery media and then install SP2 immediately.

• The installation of Vista Service Pack 2 failed

  I had been facing a blue screen often enough lately when I downloaded the SP2. Windows has responded by "Windows can check the bluescreen the next time u log" but he wouldn't do anything.

  After downloading steps 1 and 2 were full. Step 3 0% would come the blue screen and the system will re-start. After that restart againit seems to 0%. So I chose, at the next restart, Mode without failure. Stage 3 took about an hour to reach 100%.

  And then he said that SP2 has been installed. Windows come back back change.

  Now, everything's fine. no problem at all. the system is normal.
  Only problem is that I don't get the option to install SP2 again.
  View these latest updates, he said SP2 failed.

  And I fear the same blue screen appear again if I somehow managed to get their hands on SP2.

  Aid to the blue screen and retrieve SP2.

  Hi Multiloop,
  Thank you for visiting the Microsoft Answers forum.
  I recommend you to perform a restore of the system to a point prior to the installation of SP2.

  * [Make sure that all security software (anti-virus, anti-spyware, firewall, etc.) are temporarelly disabled].
  To access the system restore, click Start and type restore, and then click Restore system from the results.

  Step 2
  ======
  Run the analysis tool
  http://support.Microsoft.com/kb/947821

  Step 3
  ======
  «Copy & paste following command prompt...» I hope this helps.

  "ipconfig/flushdns".
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  Regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  %WinDir%\System32\Catroot2 CD
  del *. * / f/q/s
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  CLS
  REM * end *.
  pause
  output

  Step 4
  ======
  Restart the computer

  Step 5
  ======
  Download and install the SP2 stand-alone
  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Hope this helps

  Thank you

• Vista - problem with the installation of Service Pack 2

  During the installation of sp2 for vista 32-bit I'm having the following problem: he is stuck on configuring updates: stage 3 of 3-0% conplète computer restarts poster above restarts again and again, and again, please help!

  http://support.Microsoft.com/kb/949358>

  http://support.Microsoft.com/kb/2438651/en-us>

• Updating from Home Premium to Ultimate... Questions related to the installation of SP1

  Hello

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows I need to install Windows vista service pack 1 kb936330 released 28/04/09

  I can goahead and install it? My hard drive does not support the function of bit locker and I already install the KB937287 , kb935509 kb938371 necessary updates and all other updates in windows update.

  If I install the SP1, I won't get the problem to enter the loop (stage 3 of 3 99% complete configuration) right. Coz, I already had this problem and reset my laptop to factory settings... Now I want to ensure, prior to SP1

  Last time I installed the SP1 from the following link and had the problem of configuration step 3 of 3 99% finished and restart loop

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  I hope that this is an old... Please let me know what are the precautions I need to take prior to the SP1 update... I don't want to see step configuring updates 3 of 3 99% finished and restart No. n times

  Thank you

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows Windows vista service pack 1 kb936330 released 28/04/09

  This I can goahead and install it?...

  Yes, you must install SP1... even just because SP1 is a sine qua non for the installation of SP2.

  It's okay which shows SP1 installed on 29 Apr-09: you haven't had not upgraded to Vista Ultimate then. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Error - system32/hal.dll is missing after the installation of updates.

  Original title: updates destroy xp installation.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i'm trying to reinstall xp sp1 on an old toshiba laptop (m35-s456).  After installation and the installation of sp2 and a bunch of KB, reboot xp will not charge and comes up with an error saying the system32/hal.dll file is missing.  no idea why an update would impact on this file?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi derek45,

  The updates you have installed Service pack 1 and 2?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link and check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S

• How to downgrade a WinXP SP3 installation to SP2 preinstalled?

  Hello

  We have a requirement to downgrade PC a Windows XP Service Pack 2 client: they are all running Windows XP Professional Service Pack 3, but this was the OS version preinstalled on the PC when purchased, then the service pack cannot be removed by the usual methods.

  The computers need to be downgraded to SP2 due to a conflict between custom software that requires that the client on machines and some of the features of SP3.  Obviously, when I try to run an installation of SP2, the PC detects that it is a previous service pack and that he abandon the installation.

  Is it possible to make the PC accept the installation of SP2, even if it is not running SP3?

  Richard.

  N ° you will need to do a fresh install of XP SP2. MS - MVP - Elephant Boy computers - don't panic!

• installation of SP2 removes feature "tablet".

  When you install SP2 on my HP Pavilion tx1419nr tablet pc, it deletes the Tablet and touchscreen feature.  HP says to stick with SP1 and not MS update.  I have already deleted and made a recovery and tried again to install SP2, but nothing helped.  Earlier, I did a restore prior to the installation of SP2 and have the function to return.  Should I update to SP2?... will I have problems later if I'm not?... I won't MS support?  This machine has been problematic from the beginning with this and my warranty period will soon be at an end.

  All expertise would be greatly appreciated.  Thank you.  :-) Lo

  As your Vista operating system is preinstalled HP, you are not eligible free support for MS, except in special circumstances that includes SP2...

  All your support comes from HP.

  But, you are always welcome to ask your questions here.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P20 - formatting drive HARD and the installation of Windows XP Sp2

  Hello world

  Beforehand, I want to thank you for taking the time to help me with my questions.

  Due to system problems I'm trying to re - install Windows XP SP2.

  Based on the installation process, I have two questions:

  1. when I start the PC, the operating system Windows XP installation CD in the CD drive, I am unable to run it directly. Instead the old operating system (which I want to remove) starts. Is there a specific key in the Toshiba P20 notebook that runs the CD automatically? I understand that when the Windows XP installation CD to run it gives me the option to format the HARD drive.

  2. If I want to format the HARD disk directly, what is the best way to do this?

  Once again, thank you very much for the help

  Best regards

  Q.

  Hello

  I assume that you have the original CD of Microsoft Windows XP.
  To install a new OS, you must start on this CD.

  Insert the CD and after laptop starting immediately press the F12 key.
  This will enable the Startup menu, and then you may choose the CD/DVD drive as the boot source.

  As to question 2;
  During the installation of XP Setup will ask you the HARD drive formatting. Simply to choose this option and the HARD drive will be formatted.

  Good bye

• The installation of Vista SP2 broke my computer

  I've lived in innumerable discussions on this site and many others to solve this problem the Vista SP2 has caused my computer to have. I have a Toshiba with Vista x 64 Home Premium computer and after several attempts failed to download SP2 months ago, I tried last night and after that he was 100% and restarted my computer it actually ruined my computer to be useful. I don't have a vista disc but a recovery partition. I already tried to use the restore point created by vista before installing SP2, but of course since it is vista this restore point fails and I have created several others before, but as if by magic, they are not put at my disposal. What is even more galling it broke my partition Ubuntu separate to be able load as well which makes absolutely no sense.

  I get the same error again and again as hundreds of others after SP2 installation on the black screen: ! 0xc0190036! 3029/89361 (dsound.dll) , I found a solution involving the use of partitions recovery tools command prompt to use this code:

  C:
  CD windows
  CD system32
  faultrep.dll.old Ren faultrep.dll
  output

  now, it worked the first time during this first stop in 1316/89361 on the startup process when he stopped to faultrep.dll, then of course another stop to dsound.dll happened and I tried the same thing, as advised in a support forum and it worked in the command prompt, but loading at startup it will pass fine faultrep since the fix but will not pass the dsound.dll portion.

  I ran a test of memory and a hard drive and it is absolutely not she. It was absolutely the installation of Vista SP2 all screwing.

  A lot of people with this problem have been very well when they could use their restore point, but of course vista is still inconsistent and would not allow me to restore my computer so now I have a $1200 thanks to the crap service Pack2 weight. I can log on to the recovery tools command prompt and open notepad.exe and file open to view my computers content together intact so much, I would like to know a solution for this problem. I also found a command line to uninstall SP2 with high fees, but because I can not connect via the mode without failure of all or the safe mode with command prompt, how am I supposed to use the instructions to uninstall sp2 via command prompt?

  Any help would be greatly appreciated since windows makes my computer a waste of money.

  The page I used to solve problems has been directly for the support site for windows and for exactly the same problem I have but he did nothing. http://support.Microsoft.com/default.aspx/KB/975430 is the link, I tried method 1 is the system restore and that has failed, because it fails just about my only point that shows that I did much more than restoration. Method 2 is to rename the file that stops the boot process, who worked for the first file but not the second. Method 3 is the startup repair that does not work.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; (*Problems after installing a service pack*).