Bandwidth does not exceed 384 Kbps.

Similar Questions

• Download adobe first stops at 43% and does not exceed

  Download adobe first stops at 43% and does not exceed

  Hello

  Please see the links below for help

  https://forums.Adobe.com/thread/2102150?start=0&TSTART=0

  Stuck on 43% trial download

  Lightroom CC (2015) download stuck at 43%, please help

  Hope this helps!

• DMZ-Link bandwidth does not change the routing table countin traffic

  Hey guys

  I'm INE laboratories dong and shoved a weird one that delivers.

  I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

  Here is my configuration:

  Rack1R6 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 54.1.1.254 distance-54

  neighbor 54.1.1.254 dmzlink-bw

  neighbour 155.1.67.7 distance-300

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  No Auto-resume

  Rack1R6 (config) #.

  Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 54.1.1.254 0 54 I

  * > 28.119.17.0/24 54.1.1.254 0 54 I

  * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 114.0.0.0 54.1.1.254 0 0 54 I

  * > 115.0.0.0 54.1.1.254 0 0 54 I

  * > 116.0.0.0 54.1.1.254 0 0 54 I

  * > 117.0.0.0 54.1.1.254 0 0 54 I

  * > 118.0.0.0 54.1.1.254 0 0 54 I

  * > 119.0.0.0 54.1.1.254 0 0 54 I

  r > 155.1.0.0 0.0.0.0 32768 I

  Rack1R6 (config) #do sh ip bgp

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i114.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i115.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i116.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i117.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i118.0.0.0 204.12.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  *>                  54.1.1.254               0             0 54 i

  * i119.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  r i155.1.0.0 155.1.146.4 0 100 0 I

  r>                  0.0.0.0                            32768 i

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  Rack1R6 (config) #.

  # now R4 configuration

  Rack1R4 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 155.1.45.5 distance-200

  155.1.45.5 route-neighbour card GAME-54 on

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  neighbour 204.12.1.254 distance-54

  neighbor 204.12.1.254 dmzlink-bw

  No Auto-resume

  Rack1R4 (config) #.

  Rack1R4 (config) #do sh ip bgp Synt.

  Local router BGP 150.1.4.4 identifier UNDER number 100

  BGP table version is 18, table 18 main routing version

  15 entries for network using 1980 bytes of memory

  18 entries for path using 936 bytes of memory

  9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

  3 entries for BGP AS-path ACCESS using 72 bytes of memory

  1 entries PMO community, using 24 bytes of memory

  0 cache entries of BGP route-map with 0 bytes of memory

  0 cache entries of filter-list BGP using 0 bytes of memory

  Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

  BGP using 4620 total number of bytes of memory

  Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

  Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

  155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

  155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

  204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

  Rack1R4 (config) #do sh ip bgp

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * i205.90.31.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i220.20.3.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i222.22.2.0 155.1.13.3 0 100 0 200 254?

  Network Next Hop path metrics LocPrf weight

  *>                  155.1.45.5                             0 200 254 ?

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  * > 205.90.31.0 155.1.45.5 0 200 254?

  * > 220.20.3.0 155.1.45.5 0 200 254?

  * > 222.22.2.0 155.1.45.5 0 200 254?

  Total number of prefixes 14

  Rack1R4 (config) #.

  # and where is the real problem, R1

  Rack1R1(config-Router) #do sh ip bgp

  Version of BGP table is 15, local router ID is 150.1.1.1

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i114.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i115.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i116.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i117.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i118.0.0.0 54.1.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  * > I 204.12.1.254 0 100 0 54 I

  * i119.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i155.1.0.0 155.1.146.6 0 100 0 I

  * > I 155.1.146.4 0 100 0 I

  * > 205.90.31.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 220.20.3.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 222.22.2.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

  112.0.0.0/8, version 4 BGP routing table entry

  Paths: (2 available, best #2, table by default-IP-Routing-Table)

  MPIO: eBGP iBGP

  Announced for the update-groups:

  1          2

  54 50 60, (from a customer-RR)

  54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

  Origin, IGP, 0, 100, valid, internal multipath localpref metric.

  DMZ-Link Bw 250 KB

  54 50 60, (from a customer-RR)

  204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

  Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

  DMZ-Link Bw 12500 KB

  Rack1R1(config-Router) #do sh ip route 112.0.0.0

  Routing for 112.0.0.0/8 entry

  Known through 'bgp 100', 200, 0 distance metric

  54, internal type tag

  Last update of 204.12.1.254 ago 00:15:30

  Routing descriptor blocks:

  204.12.1.254, 155.1.146.4, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  * 54.1.1.254, 155.1.146.6, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  Rack1R1 (config - Router) #.

  as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

  can you please help me if I makeover anything in my setup?

  Hello

  Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

• the cursor size does not exceed 200

  I'm doing a burning and dodging in photoshop CC, but when I use the [&] to change the size of the cursor, it will not not exceeding 200 pixels in size.  In fact, it continues to grow, but the Visual of the cursor remains at the 200 pixel size I tried to change the cursor preference but the same thing regardless of what I have chosen.  The same problem exists for the brush with the stamp tool.

  I've updated my 10.9.5 OSX and the problem is now resolved.

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.

• Dynamic action - check if the size of the texfield values does not exceed limit

  Hello
  
  I have a form and I'm trying to use dynamic Action to process the form values. I don't know how to get the length of the value of a textfield and compare to what I said in the values
  
  The order of the day called P6_USERNAME which can be more than 10 characters long.
  
  So I tried to create a dynamic Action with the following parameters in the region when .
  
  EVENT: Press button
  SELECTION TYPE: jQuery Selector
  jQuery SELECTOR: $("P6_USERNAME").val () .length
  CONDITION: above
  VALUE: 10
  
  Of ACTION GENUINE, I had a view only showing a message "you have exceeded the limit.
  
  The above didn't work and tried to work it around with:
  
  $v("P6_USERNAME").val () .length
  
  that no longer works.
  
  Any suggestions on how I can achieve this? The only options I got in the Type of selection are: point, area, object DOM and jQuery Selector. What I'm really after is retrieving the value of the element, so I can use it for comparison with the value to run my Real Action
  
  APEX 4.0 - Oracle XE 11 G - Windows 7 32 bit

  It is not necessary to use a validation/dynamic action. Set the maximum width for the element attribute and the browser will prevent users to enter values longer than that.

• Table does not exceed more than 1001 lines

  Hello
  
  I have a search page and its supposed to extract about 5000 lines in the region of the table, but I see only 1001 lines. The region of table restricts the other lines to be recovered?
  
  Thank you.
  
  PK

  Check the value of profile-' FND: view object Fetch Size Max. It has a higher value. But don't forget that this would apply to all VO in all applications. I would like to know if it works.

  If you want only this VO to fetch more rows, then extend the VO and call setMaxFetchSize(-1) on the VO.

  Thank you
  SAI.

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• LG 27mu67 does not work at 60 Hz to 60 Hz

  I bought a 27 inch monitor 4K 27MU67 LG I want to use it with my MBP 2014 13 "retina.

  It is connected to the RFP provided mini DP cable to the thunderbolt/mini DP of the MBP, but I can't work at 60 Hz and the high resolution that it should do. When I chose a 'ladder' resolution in the settings menu, the resolution does not exceed 1920 x 1080, which is low for this screen (it should do according to the specifications of 3840 x 2160).

  Any advice would be welcome.

  Just got new LG 27UD68-W. The same problem. Only 1920x1080@30Hz

• Y70 battery is connected but does not load only 61%

  I have a brand new Lenovo Y70 8.1 Windows running and the battery is plugged in but does not exceed 61%.

  It is said: 61% available (olugged, to the do not load).

  I; ve looked several times under Power Options, but I don't see any settings anywhere.

  All Updats of Windows have been installed and the update of Lenovo says it is too.

  Anyone know what is happening?

  Thanks, I found this in the application of "Lenovo settings" under "energy Manager".

• Photo download file may not exceed 4 MB

  I need to upload a picture of my 'Images' file to be used as an image of portfolio for a job search site.  The image file may not exceed 4 MB otherwise the image will not download on their Web site.  I tried to resize the photo but can only resize in... inch, pixels or as a percentage.  I tried all of the 3 types of methods of resizing and still can't download my picture.  How can ensure me that my picture does not exceed the 4 MB limit?

  Please notify.  Thank you.

  E-mail address is removed from the privacy *.

  The following freeware resizer might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Prish Image Resizer
  http://www.powerhourgame.com/windows_vista_image_resizer_powertoy_prish_image_resizer.htm
  (left click the "Download now" button... the name of the file to ")
  downloading is: "PrishImageResizer.msi"... Click with the left button to install)

  Once the utility is installed... all you have to do is right
  Click on a photo and choose... Prish Resizer.

  You can enter a custom size or just simply
  left click "Resize to 1024" which should be enough for
  your task and the size of the file will be greatly reduced.

  The resized image will appear in the folder with the original
  in a new folder named Resized.

  Good luck...

• stop a VI if it does not give a value or that it exceeds a certain time

  Hello

  I would like to stop a vi running if a timer is over some time. I am running a calculation, but sometimes it takes forever to complete, so I would stop programmaticaly his VI if Let's say run for 1 min without giving a result and stopping.

  I tried the elapsed time with the while loop, but it does not work as I have a control loop & simulation inside the while loop and he's stuck there (integration slow) which prohibits the while loop to stop if the maximum run time is reached.

  Thank you

  Zied

  Maybe you could change this VI according to your needs.

• Workout App does not define 'fast market' equivalent?

  When I use the app to drive on my Apple Watch when I went up on a normal bike, not all of my journey is considered to be a workout.  I can be riding for an hour, but the app decides that the only parts of this time count for a workout.  The explanatory note said I have to do the equivalent of a brisk walk.  What is c?  Is it using my pulse?  If so, it's too bad because I take the medication that slows down quite to the bottom of my heart rate and it is very difficult to be in green all the time.  My bike course map is painted in green, yellow and Red areas.  So if I stop briefly for traffic, it is red and does not count.  If it's yellow, it doesn't count... so it appears.  This means that a one hour bike ride can have only 15 minutes of training time.  That makes no sense to me.  Have I not that bad?

  Tracy Rog wrote:

  ..  The explanatory note said I have to do the equivalent of a brisk walk.  What is c?  Is it using my pulse?  ..

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk. This requirement applies as well to the general course daily wear and record training sessions through the training exercise credit app which is awarded for each minute during which this condition is met.

  The definition of a brisk walk varies from one person to another and depends on your personal information.

  To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.

  Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).

  Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.

  If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  More information:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
  • Use the activity on your Apple Watch - Apple Support
  • Use of the workout on your Apple Watch - Apple Support

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Post photo or video from the album shared and it does not appear

  Lately I've known something very strange.  Very rarely, I go through the steps to post a photo or a video on an album shared my Photos on my iPhone, but after finishing when I type then "Shared" downstairs to check the album, the photo is not here.  It does not appear in the shared himself album, or activity.  It just is not there.  It happened several times. Basically, I am able to post fine, but this happens sometimes, apparently with nothing else.  WiFi is fine.

  Any thoughts?  It seems that there is so much it's always bugged on shared albums.

  What is happening with Albums that you share or shared Albums from someone else? It happens in the same album, or different? Y at - it albums that you try to add photos or videos of exceeding limits of sharing:

  limitations of sharing photos to iCloud

  These are sharing photos of iCloud hourly and daily limits:

  • Maximum number of photos and videos in a single contributor through all the albums at the time: 1000
  • Maximum number of photos and videos in a single contributor through all the albums, per day: 10 000

  These limits sharing are separated from the download above limit. For example, in the same day, you could upload 10,000 photos to my photo stream, then share these photos 10 000 or 10,000 other photos.

  Some additional limits to shared albums:

  • Maximum shared albums an owner can share: 100
  • Maximum shared albums, a user can subscribe to: 100
  • The maximum subscribers per shared album: 100 (the number of subscribers on each shared album)
  • Maximum number of photos and videos of all contributors in any album shared a handset: 5000
  • Maximum number of comments per photo or video in a shared album: 200 (a comment can be a text entry or a like)
  • Maximum number of characters per comment: 200
  • Maximum number of guest, owner of a shared album can send per day: 200

  See you soon,.

  GB