Base date regarding the issue of SQL

Similar Questions

• Validating data on the issue of Webforms

  Hello

  I put a data validation on an online form that will transform the Orange cell if the user enters a negative value.  However, she still accepts the negative value.  So technically they could leave and move.   Is there a way to block users to enter a negative value in a cell?  What is as close as you can get?

  Thank you

  Data validation cannot currently prevent the data actually saved.  (He has been asked several times.)  That said, you CAN prevent users to promote their data if the validation fails.

  Hope this helps,

  -Jake

• XML data in the table using sql/plsql

  Hi experts,

  Could you please help with the following requirement. I have the tags xml (.xml on a server file) below. I need to access this file and read the XML and insert into the db table using sql and plsql. Is it possible with the cdata below? And there is a nested this table.

  Could someone please guide me if you have a sample code file and xml.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < generation_date > <! [CDATA [17/11/2015]] > < / generation_date >

  < generated_by > <! [CDATA [Admin Admin]] > < / generated_by >

  < year > <! [CDATA [2015]] > < / year >

  < month > <! [CDATA [01]] > < / month >

  < author >

  < author > <! [CDATA [user author]] > < / author > < author_initial > <! [CDATA [user]] > < / author_firstname > < author_country > <! [CDATA [author]] > < / author_lastname >

  < author_email > <! [CDATA [[email protected]]] > < / author_email >

  < author_data_01 > <! [CDATA []] > < / author_data_01 >

  < author_data_02 > <! [CDATA []] > < / author_data_02 >

  < items >

  < article_item >

  < article_id > <! [CDATA [123456]] > < / article_id >

  < publication > <! [CDATA [Al Bayan]] > < / publication >

  < section > <! [CDATA [Local]] > < / section >

  < issue_date > <! [CDATA [11/11/2015]] > < / issue_date >

  < page > <! [CDATA [2]] > < / print this page >

  < article_title > <! [CDATA [title.]] > < / article_title > < number_of_words > <! [CDATA [165]] > < / number_of_words >

  < original_price > <! [CDATA [200]] > < / original_price >

  < original_price_currency > <! [CDATA [DEA]] > < / original_price_currency >

  < price > <! [CDATA [250]] > < / price >

  < price_currency > <! [CDATA [DEA]] > < / price_currency >

  < / article_item >

  < / articles >

  < total_amount > <! [CDATA [250]] > < / total_amount >

  < total_amount_currency > <! [CDATA [DEA]] > < / total_amount_currency >

  < / author >

  < / xml >

  Thanks in advance,

  Suman

  XMLTABLE using...

  SQL > ed
  A written file afiedt.buf

  1 with t (xml) as (select xmltype ('))
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  [[12 [email protected]]] >
  13
  14
  15
  16
  17
  18
  19

  
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33 ") of the double)"
  34-

  
  35 end of sample data
  36-
  37 - assumptions:
  (38 - a) XML may have several tags
  (39 - b) each may contain more
  40-
  41 select x.gen_by, x.gen_date, x.mn, x.yr
  42, y.author, y.auth_fn, y.auth_ln, y.auth_cnt, y.auth_em, y.auth_d1, y.auth_d2
  43, z.id, z.pub, z.sec, z.iss_dt, z.pg, z.art_ttl, z.num_wrds, z.oprice, z.ocurr, z.price, z.curr
  44 t
  45, xmltable ('/ authxml')
  from $ 46 t.xml
  path of 47 columns gen_date varchar2 (10) '. / generation_date'
  48, path of varchar2 (15) of gen_by '. / generated_by'
  49, path of varchar2 (4) year '. "/ year"
  50 varchar2 (2) mn road '. "/ month"
  51, path of xmltype authors '.'
  52                 ) x
  53, xmltable ('/ authxml/authors ')
  from $ 54 x.authors
  author of 55 path of varchar2 columns (15) '. / author'
  56, path of varchar2 (10) of auth_fn '. / author_firstname'
  57, path of varchar2 (10) of auth_ln '. / author_lastname'
  58 road of VARCHAR2 (3) auth_cnt '. / author_country'
  59 road of varchar2 (20) of auth_em '. / author_email'
  60 road of varchar2 (5) of auth_d1 '. / author_data_01'
  61, path of varchar2 (5) of auth_d2 '. / author_data_02'
  62, path of xmltype articles '. / Articles'
  63                 ) y
  64, xmltable ('/ Articles/article_item ')
  from $ 65 y.articles
  path id 66 number columns '. / article_id'
  67, path of varchar2 (10) pub '. ' / publication.
  68 road of varchar2 (10) dry '. / section'
  69, path of varchar2 (10) of iss_dt '. / issue_date'
  70 road of VARCHAR2 (3) pg '. "/ print this page"
  71, path of varchar2 (20) of art_ttl '. / article_title'
  72, path of varchar2 (5) of num_wrds '. / number_of_words'
  73, path of varchar2 (5) of oprice '. / original_price'
  74 road to VARCHAR2 (3) ocurr '. / original_price_currency'
  75, path of varchar2 (5) price '. "/ price"
  76, path of VARCHAR2 (3) curr '. / price_currency'
  77*                ) z
  SQL > /.

  GEN_DATE GEN_BY YEAR MN AUTHOR AUTH_FN AUTH_LN AUT AUTH_EM AUTH_ AUTH_ ID PUB DRY ISS_DT PG ART_TTL NUM_W OPRIC HEARTS PRICE OCU
  ---------- --------------- ---- -- --------------- ---------- ---------- --- -------------------- ----- ----- ---------- ---------- ---------- ---------- --- -------------------- ----- ----- --- ----- ---
  17/11/2015 Admin Admin 2015 01 user author user author [email protected] 123456 UAE Al Bayan Local 11/11/2015 2 is the title.   165 200 AED AED 250

  Of course, you'll want to change the types of data, etc. as needed.

  I assumed that the XML can contain several "" sections and that each section can contain several entries.

  Thus the XMLTABLE aliasing as 'x' gives information of XML, and supplies the data associated with the XMLTABLE with alias 'y' which gets the multiple authors, which itself section of the XMLTABLE with alias 'z' for each of the article_item.

  CDATA stuff are handled automatically by SQLX (XML functionality integrated into Oracle's SQL)

• Form with the data of the issue of the database

  I made a form so that I can test the connection to a database and fill in the form with data from db.

  My form is very simple, and I used MS Access to the db.
  The db has two tables:

  Table 1: ID, wheels, cost
  Table 2: ID, brakes, cost

  The form of hierarchy:

  

  Form:

  

  Displaying the data

  

  Brake and wheel data flows into the ddlists of the db.

  Cost values display the costs in the table.

  
  How to "bind" the cost value of the wheels to the wheel data, so that when you select "wheel 2" package. "
  the ddlist, the cost value of the wheel 2 package appears in the wheel cost field?

  
  How I will summarize cost fields to provide a total?

  I downloaded the form and the db here: https://Acrobat.com/#d=HEGvv-CMb0o5uPGxisU1Kw

  You need to make calls to two DB. 1 the one you have made already that will fill the DDList with appropriate values. Then a second call that will pass a SQL statement to the DB to retrieve the record that contains the value of the wheels or brakes that the user has selected in the DDList. This part is possible with the code. There is an example how to proceed at this place.

  http://Forms.stefcameron.com/2006/09/29/selecting-specific-database-records/

  You can mine this site for another form of information DB because it has a couple of different entries on access DB.

  Paul

• Creator of recovery media from Toshiba regarding the issue.

  Hi, I have a new Toshiba laptop and I would like to replace Windows 7 Ubuntu (completely - there is therefore no left of files WIndows on a SSD). I used creative recovery tool of media I've found among utilities preinstaled by Toshiba and I created the USB recovery.

  I wonder, when I delete WIndows and install Ubuntu in place, is the USB I created what I come to Windows?

  In other words: when I want to go back and replace Ubuntu with Windows, boot from USB and execution of recovery will be all I have to do to get rid of Ubuntu and Windows only?

  Thank you

  > I wonder, when I delete WIndows and install Ubuntu in place, is the USB I created what I come to Windows?

  Yes, the use of the recovery media (no matter if its USB memory stick or recovery disk recovery) would fix the laptop back to factory settings.

  Factory settings means that you get the same State as at the first day of the purchase.

• Regarding the issue, I saw on default app pool administrator

  I am following up on the post about the appearance of the pool of applications by default with the admin rights when I use my windows 7 pro machine as a private user.  I feel uncomfortable with this language IIS and asp.net, it scares me, it looks like a hack.  Of the answer and the explanation, I know that this is not unusual and Windows Pro has it built in.  However, I never saw him, and I want to end the situation as a whole.  You advised that the admin should open the file for this admin and delete the files. and then check if it is in the admin group.  But what can I do to safely change it didn't happen.  can I disable windows features change settings?  Should I take possession of the Group of users?

  Want to know how to do this.

  Thanks in advance

  .NET is a network of Microsoft software - see here.
  The C:\Public folder holds information that applies to all users on your PC.

  The C:\DefaultAppPool folder has been created on your computer because you have made use of some cloud services - see here.

  There is nothing to worry about with each of these points. You are perfectly safe. What you should be concerned about, it's not not to fall into the trap of having a single administrator account. Many people get in diabolical trouble when something goes wrong with this account. They all have a spare House (for obvious reasons!) key, but few have a spare fully tested and documented admin account.

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• By using the Service Push SQL Server data push?

  Hello

  We will implement a Blackberry, a Blackberry application that retrieves data from a SQL Server data source. In fact, there will be a web application where users will enter into data (SQL Server) and the BlackBerry user should see the data at the end of each day's work with his BB app on the go. I suppose we must apply a solution of "push technology". The problem is that we do not have a BES. Is it possible to implement a solution without BES, using 'Push the Service'?

  Best regards

  burakk

  No problem. Registration for BIS Eval, test your push button and then you can put in production. Be aware however that PUSH does not work in the simulator of debugging can be a bit of a pain...

• Issue by updating the configuration of the specific data of the provider for a virtual portgroup distributed in vcenter 5.5

  Hi all

  We strive to update provider specific data in config spec for a group of distributed virtual ports, we are able to reconfigure the dvportgroup for the first time and data updates are visible in the list of mob (QuerydvsbyUUID). But the second time, if we try to update specific provider we receive error in vcenter below.

  Could not complete the operation due to simultaneous changes by another operation

  
  

  The environment we use is as follows:

  Customer vpshere 5.5 ESXi and Vcenter 5.5 5.5.

  
  

  We use Vijava to update the specific configuration of the dvportgroup seller (reconfigureDVPortgroup_Task). When we looked this error, we found below thread:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2016329

  But we try to reconfigure the dvportgroup with the root user in VCenter.

  Ask you please let us know if I'm doing something wrong.

  Thank you and best regards,

  Aristides Maximilian

  
  

  Found a similar question in the communities,

  https://communities.VMware.com/message/2342966#2342966

  The issue is a bad configversion.

  Using the last ConfigVersion (the real value of the ConfigVersion from the portgroup extraction) in ReconfigurePortgroup_Task worked well.

• Fast and slow when issued by app SQL query on the issue mnaually

  Hello
  
  I have a more general question concerning a specific behavior of Oracle.
  
  I update a feature of an application. The application is not responding and I finally put end. I checked Oracle if a request is long running by using the following statement:
  
  Select s.username,s.sid,s.serial#,s.last_call_et/60 mins_running, q.sql_text from v$ session s
  Join v$ sqltext_with_newlines q
  On s.sql_address = q.address
  When status = 'ACTIVE'.
  Type <>'BACKGROUND '.
  and last_call_et > 60
  order of sid, serial #, q.piece
  
  
  The result of the above query is:
  
  WITH CONNECTION AS (SELECT * FROM WW_CONN C WHERE (C.FID_FROM I))
  N (SELECT FID FROM WW_LINE WHERE FID_ATTR =: B1) AND C.F_CLASS_ID
  FROM = 22) OR (C.FIDto IN (SELECT FID FROM WW_LINE WHERE FID_AT))
  TR =: B1) AND C.F_CLASS_ID_TO = 22)) SELECT MIN (P.FID_ATTR) AS FI
  CONNECTION C, WW_POINT D_FROM P WHERE (P.FID = C.FID_FROM A
  C.F_CLASS_ID_FROM ND = 32 AND C.FLOW = 1) OR (P.FID = C.FID_TO
  C.F_CLASS_ID_TO ND = 32 AND C.FLOW = 2)
  
  I have another tool that shows me the connection parameter values. So I know that the value of: B1 is 5011 - the id of the feature updates. This query runs for 20 minutes and finally more time stops in front of him. The update process involves several sql statements - if it does not have the update, but is part of the process.
  
  Here's the bit I don't understand: when I run the query in SQL Developer with value 5011: B1 it takes 0.5 seconds to return a result.
  
  Why did the sql statement taking so long on the issue by the application, but takes less than one second when I run it manually?
  
  I sent a dump of the data to the vendor of the application that is not able to reproduce the problem in their environment. Could someone explain to me what is happening here or give me key words for the search?
  
  We use 11 GR 2, 64-bit.
  
  Thank you very much
  Rob

  Hi Rob,

  at least, you should see some differences in the statistics for the child cursor different (one for running the application must show at least a higher value for ELAPSED_TIME). I would like to use something like the following query to verify the information for the child cursors:

  select sql_id
       , PLAN_HASH_VALUE
       , CHILD_NUMBER
       , EXECUTIONS
       , ELAPSED_TIME
       , USER_IO_WAIT_TIME
       , CONCURRENCY_WAIT_TIME
       , DISK_READS
       , BUFFER_GETS
       , ROWS_PROCESSED
    from v$sql
   where sql_id = your_sql_id
  

  Concerning

  Martin

• How to access a certain date in the date and time field SQL Server

  I have a field named job_date in a table in my database of the 8 SQL Server.

  The data type is datetime.

  Thus, the values for the fields as the 2013-03-11 15:55:52.000 look.

  How to query this field to include only the values of a certain date?

  For example

  < cfquery name = "get_job_name" datasource = 'abc' >

  SELECT FROM job_info job_date WHERE Job_name = March 12, 2013"

  < / cfquery >

  When I query the field now I get NO RECORDS.

  This is because as the fields like this 15:55:52.000 2013-03-11. instead of this March 12, 2013"

  How to access a certain date in the date and time field SQL Server when its formatting as this 15:55:52.000 2013-03-11. ?

  where job_date > = TheDateYouWant

  and job_date<>

  In addition, the format is irrelevent.  The only issue of date formats time is when you want to display.

• filling of datetime column SQL Server with the data in the date column oracle

  After a lot of "finangling", I think I have my link dg4msql works well between Oracle and MSSQL.
  
  Now, what I'm trying to do, is fill a table in MSSQL with an Oracle table column values, whenever a new row is inserted in the Oracle table. I use a very simple trigger on the oracle table that goes basically like this:
  
  mware is dblink to MSSQL database, oracle col worth DATE and mssql col is of type DATETIME
  
  This is the relaxation: (edited to show only the column in question)
  ==================================================================================
  CREATE or replace TRIGGER < oracleowner >. INSERT_INTO_NVDB
  AFTER INSERT ON < oracleowner >. < oracletable > for each row
  BEGIN
  insert into '< mssqlowner > '. «< mssqltable > @mware «»
  (
  "load_date_time,"
  )
  VALUES)
  : new.loading_date,.
  );
  
  END;
  ==================================================================================
  
  Now, when you enter a record in the Oracle trigger triggers ok table but does not insert a date in the MSSQL table, the 'load_date_time' in the mssql table can have NULL values so I guess there just inserts a null value.
  
  When I activate the triggers on the table MSSQL, which then takes these values and inserts them into another table with values from other tables, inserting in the Oracle table fails because the relaxation on the MSSQL database tries to pass the date (which is empty) table MSSQL in another table where the datetime field is not null.
  
  I guess it's because Oracle date format is not compatible with MSSQL, which I think is "yyyy-mm-dd hh: mm:"- so I have to either convert the date format by default Oracle to match a MSSQL, or convert a char of the trigger value. (The developer of the side MSSQL says if I can convert it to a char value that should be ok too)
  
  I think that it is probably better to leave it in the date format, the best way to do this would be to put an "alter session set nls_date_format ="at the beginning of the trigger?
  
  Can I convert the date to char the trigger easily? If there is a better way to proceed in the way I approach it I'm all for it.
  
  Thank you!

  Hello
  Your best option is to explicitly convert dates Oracle in a format recognized by SQL * Server. It's more coding, but then you know exactly what is being inserted and you give more control, if anything changes. You can also code to handle null data.
  I'm not sure than to try to change the format of date to 'alter session... ". "do what you want.
  You can use "to_char" on a date into character data-

  To_char (, "HH24:MI:SSxFF of MON-DD-YYYY")

  and use any mask format supported.
  You also use 'to_date' to transform the character data in a date format, as well as 'to_char' and 'to_date' in combination.
  For example -.

  SELECT TO_CHAR (TO_DATE (October 27, 98 ',' DD-MON-RR'), 'YYYY') 'Year' FROM DUAL;

  This is all discussed in the documentation-

  Oracle® database
  SQL language reference
  11g Release 2 (11.2)

  where it also describes the different format masks.
  If you need further assistance on the use of to_date, to_char formats then ask in the forum SQL/PLSQL.

  SQL and PL/SQL

  where they have more experience.

  Kind regards
  Mike

• the data in the column sql colorization

  Please help predict the data in the column of blue and underlined.
  I wanted to add in sql only.
  How can I add

  select 
  decode(TUFF_GENERIC_PKG.adj_status_func(m.billing_key),'Y','<a href="javascript:alert(''This billing period has an open adjustment request currently pending'')">'||  to_char(to_date('01/'||trim(substr(M.REPORT_PERIOD,5,2))||'/'||
  trim(substr(M.REPORT_PERIOD,1,4)),'DD/MM/YYYY'),'Month YYYY') ||'</a>','<a href="f?p=&APP_ID.:5:&APP_SESSION.:BRANCH:NO:
  5:P5_BILLING_KEY:'||m.billing_key||'">'||  to_char(to_date('01/'||trim(substr(M.REPORT_PERIOD,5,2))||'/'||
  trim(substr(M.REPORT_PERIOD,1,4)),'DD/MM/YYYY'),'Month YYYY') ||'</a>')
  from dual;

  Hello

  Adding style to html (a tag) in your query

  Kind regards
  Jari

• pl/sql block, reading the reading of data from the table to a single point in time

  I'm trying to figure out if several cursors in a PL/SQL block are executed inside a single Point in time, and so don't see no updates of paintings by other processes or procedures running at the same time.
  
  The reason why I ask is I have a block of code as an initial extraction of data, with some Sanity Check before the code runs. However, if another procedure might modify the data between the two, then the mental health check is not valid. So I am essentially trying to know if there is consistency read in a PL/SQL, preventing updates to other processes to be seen.
  
  Anyone who has an idea?
  BR,
  Chambaz

  Google SET Transaction.

  or

  Follow this link

  http://download-West.Oracle.com/docs/CD/B12037_01/server.101/b10759/statements_10005.htm

  Kind regards
  Prazy

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports