Basic installation DVD with trial on computer

Similar Questions

• About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after receivi

  About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after having received an automatic notification. Photoshop will not launch now (everything else is OK). When the Photoshop window it immediately crashes with the message "adding extensions...."  Quick basic routines' but nothing happens and I have to "force stop" window. Advice please?

  reset your preferences: https://forums.adobe.com/thread/375776

  In addition, if you inadvertently "improved" cs6 in the cc version, you use a trial (unless you have purchased a subscription) which will expire in 30 days.

• Installer Windows missing from my computer Windows Vista Home Basic

  Whenever I try to install a software, a window appears saying that my windows installer is missing on my computer and cannot install the software?  What should I do?

  I had to take my computer to Best Buy for repair.  He got like 200 virus on it.  It took 4 days to clean the virus, tune up and install Windows 7.  They couldn't fix with Windows Vista Home Basic on it because they did not have a disk and I don't have either.  When they have installed Windows 7, who took care of all my problems.

  Thanks for your help.

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• How can I decoder installation dvd on my computer

  pouvez installation dvd decoder

  pouvez installation dvd decoder

  ========================================
  The following link offers DVD decoders you can buy:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  For a free alternative... it may be worth trying to download
  and install the following Codec Pack:

  * Proceed at your own risk *.

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Windows Vista-
  System Restore:
  Frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore

  Or... you can try the free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/ John Inzer - MS - MVP - digital media experience

• I found an old vista home basic dvd with a key, how can check whether key works but not install it?

  I found an old vista home basic dvd with a key, how can check whether key works, but not install it? some dvd install can be live boot from themselves too [password required for a direct start?]?

  Hello

  You must install it to see if it is legal to do so.

  There is no public database of product keys.

  See you soon.

• Burning disc - disc does not play on any DVD player or a computer with the exception of my computer

  I have downloaded music and burned my computer on a DVD disc.  This disc can not play on any DVD player and computer but my computer.  I would like to read a disc in any CD or DVD drive.  Please tell me what I need to do.  Thank you!!!

  I recommend you burn a cd or a dvd with zune (microsoft Corporation) follow the instructions here to find out how to burn a cd or dvd to zune.

  If your song doesn't appear in your collection, I suggest buying your song with zune or Itunes

  ITunes costs about $ 1 per track and zune costs 14 dollars per 10 tracks.

  To learn more about the visit of zune music and reduced here.

  In Itunes, all you have to do is open itunes and click itunes store then the music and find the music you want.

  Download zune go here http://www.zune.net/en-us/products/software/download/default.htm

  To download Itunes, go here http://www.apple.com/itunes/download/

• My computer turns off when I try to burn a DVD with Windows DVD Maker__

  My computer turns off if I try to burn a DVD with Windows DVD Maker.  It was working fine and now it will not get past a certain percentage without stop.  What can I do?

  Hello Timbay1,

  Thanks for posting on the Microsoft answers Forum.

  What has changed in your environment, as it was working before and now does not work? Have you installed any new software or updates?
  It can be 3rd party software created a conflict with your codecs and you need to re - register.

  You could check and see if you have compatible Codecs installed in Windows Vista.
  or you can try to use the codec for Vista Codec Pack - pack

  There are other 3rd party codecs but I can't guarantee that they will work with Windows Vista.

  Please answer back with an update.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I bought a DVD with 6 Lightroom but I can´t fullfill the installation process on my PC (W10). Instead, I receive an invitation to join a group of CC. What bad, please help me.

  I bought a DVD with 6 Lightroom but I can´t fullfill the installation process on my PC (W10). Instead, I receive an invitation to join a group of clouds. What bad, please help me.

  Gunnar

  Hi Gunnar,

  You can ignore this invitation and install directly 6 Lightroom using your DVD or can be downloaded from this link: Install Photoshop Lightroom

  Kind regards

  Claes

• Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I bought the software told me that it is possible to install the

  Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I purchased the software, I was told that it is possible to install the software on a second computer. But I also read lately that I will be allowed to work with a computer. I want to work on both of my computers without or install and / activation of the software every time. Is this possible? Thank you!!

  @

  You should be able to install the product on two computers as long as they are running at the same. The platform should also be Mac

  You can download the product of

  Download the CS6 products

• After that the installation of first elements of dvd with the series nr.install 11 is interrupted and uninstalled

  After that installation first elements 11 DVD with the nr.install series is interrupted and uninstalled. What should do?

  Troubleshoot installation, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements-premiere.html

• Problem reading Captivate 6 on Vista installation DVD

  I just got my copy of Captivate 6 on a DVD for Windows. I would like to install 6 Captivate on a PC running Windows Vista 64-bit service pack 2.

  My DVD player can not open the installation DVD to start even the installation. Is there a way I can install 6 Captivate on my system?

  PS - I already paid for this copy of Captivate 6.

  Well, it is a mystery. After asking the question, I downloaded and installed the trial version and then used the product code for the version purchased to get a serial number. It worked.

  I also tried on the installation DVD on another computer with Windows 7, and he began to autorun as expected.

  I then returned to my PC Vista, inserted a former Acrobat DVD installation, which began in the autorun as expected. I removed the Acrobat installation DVD and inserted the new Captivate 6 installation DVD, and magically it started autorun this time.

  It must have been my optical drive, but I don't know why he read the DVD this time and not others.  (Never had any error message. The computer just did not read all the data on the disc and was always looking for media to be inserted. "Maybe something is slightly misaligned?)

  In any case, the problem is resolved and the software is installed and registered. Thanks for your reply.

• The OSX 10.4 installation DVD can be installed on a completely wiped Mac?

  I have an iBook G3, with the type of disc loading slot. At present, it has an operating system installed. I found a DVD of 10.4 Installation on craigslist for very cheap, but I know that this type of disk requires that a previous installation of 10.3 be on the hard disk. I have no idea, and I don't want to buy the DVD to see that it does not work. Here is a picture of the disc:

  

  Can it be installed on a Mac without any version of Mac OS x on the hard drive, and if not, is there a workaround or modification that I can do to make it work?

  There is a part number on the DVD, so maybe it's a way to know if the DVD 'install' is or

  isn't wall installation or upgrade to OSX earlier. What is visible in the image, it does

  not seem to be an update for version 10.3 Panther. And a gray-label would indicate the disk

  was designed for use with a Mac specific build version only. So far, she poses as an installation DVD full.

  The iBook G3 (white and colors) do not comes with an optical drive to load per slot. Yours is a G4?

  From what I can tell by observing that the Tiger DVD install image you posted, it most of the

  not match a full installation DVD Tiger, that I still have in the official retail box.

  Mine says:

  Mac OS X Tiger includes 2 XCode

  Version 10.4 2Z691-5305-A

  If you have access to the actual DVD, try searching for the item by part number; If it is hidden

  in the picture you posted, so I can't say what I see enough search. And the numbers I do

  See are not among those listed in the database MacTracker which shows all OS X build versions.

  {Something on an installation of Tiger DVD, is the content of the disc is compatible with the capacity of a

  Media single layer; so if you need to, you could make a backup of emergency with the old style drive

  optical drive. {Later versions of OS X have more content and a double-layer disc would be required.}

  Should the cost for the DVD be really cheap and compose a full retail disk, which can be large.

  Install sites such as welovemacs and others who used to deal with the old system of out of stock

  media, sometimes, you can see what they ask if they have a few for sale again.

  This page includes pictures of the media the retail labels more old OS X install original disks:

  http://www.Macworld.com/article/2101301/advice-from-an-Apple-Tech-how-to-get-old - mac-os-x-install - discs.html

  {Even though I have a few original on DVD, the oldest media of retail OS X disks that I have is Jaguar or Puma;

  I have a tiger in the retail box & the image you show looks like an installation-in-all support Mac DVD.}

  Are you sure that your iBook is a white G3, or is this a G4? You say that it is an optical drive slot-loading;

  G3 models all had tray optical drives. I used to own a first white model dualUSB G3

  and no iBook G3 models use an optical drive "slot-loading". It was only the first iBook G4... And I have

  have a last G4 iBook model perfect condition, always close. It comes with 10.4 Tiger gray-label.

  Good luck & happy computing!

• I followed all the steps in the Michael Murphy answer regarding the error code 80070490, but still it does not work. I can't follow step 2 I have lost the installation DVD. Help?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: solutions for error code 80070940. See above.

  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You should always respond to the original thread:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/11678342-0D0A-48F9-9186-726a654a34b7

  Options:

  1. find the misplaced installation DVD.
  2. see if benefit you from a replacement or need to contact the manufacturer for a replacement of DVD.

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  Once you have the installation media, then maybe you can then continue with the steps that Michael Murphy outlined for you. TaurArian [MVP] 2005-2010 - Update Services

• I don't see my cd/dvd drive in my computer?

  It's about to get the best of me!  I'm trying to fix HP Pavilion dv9700 with processor AMD windows Vista 64bitt wife. When you insert a cd/dvd in the drive it turns, bends and turns off. I do not see the cd/dvd drive in my computer (drive E :). I can see it in Device Manager and device manager says its working properly. I deleted the upper and lower filters in the registry, uninstalled the drive, reinstalled the drive, the drivers updated, physically removed the drive from the computer and check the connector, everything looks ok. Is the drive itself bad? If so, why then I see it in my computer. I ran a few fix his well they say they fixed the drive sucssefully it is still a problem, and it still does not work. I'm not a big fan of Vista OS, less than one become today!

  Hello

  Check with HP, their drivers support and documentation online and ask in the Forums of HP in case
  known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ================================================================
  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.