Batch-resizing problem still frames of time in the project overview

Similar Questions

• Is it possible to update the first pro and still be able to use the projects of the old version

  Is it possible to update the first pro and still be able to use the projects of the old version

  You can open projects from versions with Premiere Pro, Yes. But I agree with Bob - make a copy of the project and open the copy. You won't be "up the Creek" if something goes wrong.

• Frame size variances in the project settings?

  Hi guys

  I have new information and some comments on my problems with get output full screen.

  I looked through all the parameters of the project, and I noticed that those that I tried to use...

  HD 1080i (60i) and HDV 1080i 30 say that the output is at a16 ratio 9 and have an image size of 1440 by 1080i.

  It's the size of the image or the ratio, I continued to try to import.

  Eventually, I realized that this isn't an image size that is proportional to the image report it lists.

  16 by 9 would be really proportional to 1 440 x 810.

  The 1 440 x 1080 video I import using one of these, exports not full screen even if it exported the same size, what about, i.e.1440 in and 1440 out.

  ------------------------------------------------------------------------------------------ ---------------------------------

  So, I looked through the project setting for a selection where the ratio indicated and the size of the frame matched.

  I found HDV 720p30.

  16 by 9 to a 1280 by 720 size.

  It would be a size easy for my work in.

  So I did a video on that size then it loaded in PE8 and it travels very well.

  Fullscreen without border. In fact it comes out full screen no matter what size I export it.

  When I exported the same video to 1600 by 900 it exported full-screen and went well.

  Then I went back and loaded the same 1280 x 720 video in 30 parameters of the HDV 1080i.

  It was also released in mode full-screen borderless.

  So the problem is that, as far as I can see the selection screen is wrong about the size of frame for the two HD 1080i and HDV 1080isettings.

  Really need to charge something to 1600 by 900 or proportional to.

  And like many I can find there is no setting that supports something else of the wide screen with the exception of the Standard 48 kHz settings.

  It seems that if you want to go to an image format widescreen 720 x 480 is the only option.

  Now I have to decide if I want to do future widescreen or are living with restrictions on the size of the image.

  I do not change horses in the middle of the stream so I can just stick with the smallest size for videos of Lucy but I'll do the other projects on the big screen.

  Thanks again for all the help.

  Mike

  Mike,

  As Steve, the two quantities are practically the same, with one exception: the IRON (pixel format). With 1920 x 1080, the format uses square, with a NORMAL pixels = 1.0. The 1440 x 1080 uses non-square pixels, with a NORMAL = 1.3333, so that they are larger, they are tal by a factor of 1/3.

  If you multiply 1440 x 1.3333, you will get very, very close to 1920.

  I don't know any standard video format, which is 1440 x 1080, but with square pixels, i.e. NORMAL = 1.0. It could be one, but it is not a standard, I know.

  When working in an animation, video screen-cap program or CAD program, it is very likely that they will work with square pixels, so that what they see on their computer screens, will be accurate, and the computer uses pixels square, where equal = 1.0.

  With HD material, I think that the only format using non square pixels is 1440 x 1080 anamorphic, detailed above. It is a bit of a hybrid, as non square pixels are gradually almost everywhere, from computer to HD TV screens.

  The use of non square pixels goes, as this was how things were designed for decades with the CRT, in NTSC and PAL televisions. Everything was then back 4:3 and 16:9 didn't talk, until right at the end of the CRT (they do not disappear completely, but probably soon). Then, set the 16:9 720 x 480 (NTSC) hit the HAND of basically of 0.9 to 1.2. The time that the SD widescreen has begun to take, the world began to go to the HD. As long as one makes a SD output, say DVD-videos, non square pixels will be with us. When the output formats are past, so I think that the 1440 x 1080 will also go the way of the dodo, and we're going to be standardized on square pixels. So, if we could only NTSC and PAL in order to, with respect to the FPS...

  Hope that helps,

  Hunt

• Try the full Version: still have black bar across the project... why?

  I just downloaded the full version of first Elements 9 for my Mac.  The project I had created with the trial version that I've been led to believe would cease to have the black bar on the video once I have downloaded and installed the full version.  The black bar is still there.  Is there anything else I need to do to make it disappear?

  Thank you

  -John

  In the FAQ: How can I remove the watermark of projects created with the trial version of the program?

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Total time of the project

  Hello

  I use 8 Captivate to create a sensitive project. How can I determine the time of my presentation. I like to keep my session of learning less than 10 minutes. I have several branches in my session. Is there a way to see the length of the total duration of each branch?

  Thank you

  Peter

  In Captivate you 'Editor time' which can be easily calculated, but can differ a lot of actual time spent by the user in a course because that time depends also on suspend interactive objects. This time can be measured over the life course. Take a look at this post, where I tried to explain:

  Displays the time information - Captivate blog

• Problems of frame - updates fail to install

  original title: problems of frame

  When downloading the Microsoft updates, everything installs fine except for the updates of the framework... I don't know if they are important or what.they do.
  I was told to uninstall all components of framework on my computer, and then reinstall., but this seems drastic.
  Can someone advise?

  Hi TerryShaw,

  The following article should help you troubleshoot setup of .net framework update issues.

  Fix the .NET Framework

• DPX batch resize

  Hi all

  First post. Please forgive all noobing.

  My question:

  I scanned a bunch of film at 4 k, as it is important that miht be scanned again. But the House of the post office we send i he need 2 k (to keep affordable). SOUL can efficiently batch resize in 2 k files and retain the metadata and don't mess with the image too? I was going to do as a batch process in Photoshop, but it is limited to only three standard types of files (which is sort of lame). Or if not either of these formats, is there another way to do within the creative cloud?

  See you soon

  You can import the DPX files as a sequence of images, and then export back as a sequence DPX with the settings you want. You should get what you are looking for.

• Eclipse fails to package the project every other time I try to run BlackBerry Simulator

  I have a simple project that I've set up using the SDK 7.1 BlackBerry, it has no external dependencies.

  Almost without fail, every other time I hit him "run on BlackBerry Simulator' I get an error similar to the following:

  Packaging project BlackBerryApplication
  C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\7.1.0\BlackBerryApplication -sourceroot=D:\Git\BlackBerry Application\BlackBerryApplication\src;D:\Git\BlackBerry Application\BlackBerryApplication\res;D:\Git\BlackBerry Application\BlackBerryApplication -import=C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\lib\net_rim_api.jar deliverables\Standard\7.1.0\BlackBerryApplication.rapc D:\Git\BlackBerry Application\BlackBerryApplication\bin
  JAR file creation failed with error -1
  The preverified classes if any are in tmp28761. See jar log of errors in C:\Users\t_gibson\AppData\Local\Temp\rapc_71af6d24.dir\jarlog.txt
  Error!: Error: preverifier failed: C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\preverify.exe -d C:\Users\ ...
  Packaging project BlackBerryApplication failed (took 0.584 seconds)
  

  No matter if I clean up project or own Simulator I still get the same error another each compilation. Does anyone have an idea what could cause this? If I type "run on a BlackBerry Simulator" right after the error, it works fine.

  I use the 9900 with Eclipse 3.7.2 and BlackBerry 7.1.0.10 SDK Simulator. The plug-in version is 2.0.0.201207181003.

  Thank you!

  EDIT: I should clarify that when I say that the cleanup project makes no difference, what I mean is that cleaning of the project once the means it compiles OK next time, but unless he is cleaned after the first compilation, again a second time the compilation will fail. If although the project before each compilation of cleaning could cause it to compile every time, this does not solve the problem that it is there always something left in an inconsistent state after a successful compilation.

  I have determined that the source of the problem was a bad setting in the project configuration that I did when I created the project, I added wrong file the project root to the source compilation path option on folders. The error in the line of rapc.exe is highlighted below

  Packaging project BlackBerryApplication
  C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\7.1.0\BlackBerryApplication -sourceroot=D:\Git\BlackBerry Application\BlackBerryApplication\src;D:\Git\BlackBerry Application\BlackBerryApplication\res;D:\Git\BlackBerry Application\BlackBerryApplication -import=C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\lib\net_rim_api.jar deliverables\Standard\7.1.0\BlackBerryApplication.rapc D:\Git\BlackBerry Application\BlackBerryApplication\bin
  JAR file creation failed with error -1
  The preverified classes if any are in tmp28761. See jar log of errors in C:\Users\t_gibson\AppData\Local\Temp\rapc_71af6d24.dir\jarlog.txt
  Error!: Error: preverifier failed: C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\preverify.exe -d C:\Users\ ...
  Packaging project BlackBerryApplication failed (took 0.584 seconds)
  

• iPad iOS 10 - no time in the notification Center

  Hi I have a Pro 12.9 iPad running iOS 10.0.2. I tried to check the weather in the center of notification yesterday and the weather wasn't there. I have no idea how long the time is missing. Honestly, I don't remember if I never checked the weather on my iPad before. In any case, I made the location services has been enabled for the weather (it was) and rebooted the iPad. But even today, still getting no time, just the date today. Works fine on my iPhone iOS 10 running. Any ideas?

  I noticed that options for "summary today ' today/tomorrow" went from the edit page of Notification Center as well. Funny I've never seen an iOS 10 review mentioning that.

  On a related note, can anyone recommend a free accurate weather widget that displays just the basic information (not in a paragraph I read as in the case of the Weather Channel widget) or a paid (but preferably free) app that does the same thing but displays also a weather for 3-5 days? Forecast + seems ideal, but I heard that it is not true. Also, I can't find it in the app store.

  Drag the home screen to the right and bring it to the top of the screen today. Scroll down to the bottom of the screen and if you do not see a time, then press the button change. From there, you will have the choice to add or remove it from the home screen. They are in alphabetical order so weather appears near the bottom of the screen. Tap to the left of the weather and that adds to the page. They will be in the order which shows at the top of the page, so you can arrange them in the desired order.

• Rollover image set to appear for the rest of the problem of the project when closing and returning 1/2 way through

  I have a set rollover image to appear to the rest of the project which works fine if all of the training is done at the same time. The project is in adobe connect and the project of closing and then reinsert the project, it will take off where the user left off but this rollover image appears on the screen instead of the current slide. The user should click on in the Table of contents or a front/rear button to turnover to go. Is there a way I can fix it so the rollover image is not back to the project?

  Have you tried to put the image rollover on Master slides in place?

• Start time for the Timeline timecode

  All my projects are starting about 5 min. on the timeline. Is it possible to make this start time shows in the timecode in zero display until the timecode shows the elapsed time of the project rather than the length of the line. My clients watch the blueray and give their notes using the bluray counter, it would be nice if I had a screen which was the same as theirs. I could use burned to tc, but that means make the whole 80 minutes. I could move the project from scratch, but that would spoil the audio automation.

  Richard Knight

  Upper right corner of the timeline, it is a small drop-down menu.

  Select time start and adjust.

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• QR codes batch resizing in Illustrator CS5 to png format.

  Hi people, I produce works for printing consisting of several versions of labels/way-markers indicating similar graphics, elements of individual texts and two unique QR codes by label.
  The problem is that production of QR software produced different sizes of content-based QR. On my label in Illustrator templates they all need to be the same size, for example 34x34mm.

  Change the size through the dialogue of transformation works perfectly, but one at a time is a pain. You use Photoshop batch resize, blur of the edges.

  Is there a process in Illustrator to adjust several objects (targets) to a common size.

  See you soon,.

  Eugene.

  If the QR code images are all in a single Illustrator file... or you can get them there, they could be batch resized using the script Set All The Things.

• How to display metadata date/time for the clips in first Pro CC per frame

  I am trying to find a way to display the date and time of capture of video imported from different cameras. In the Panel the metadata, I see that there is a date and time when the clip was created, however, I'd like to be able to see this data in date and time displayed on the screen on a basis of image by image. It would help me synch with still images, I'm looking at the respective time of capture of the still the framework where the taking of photography yet (or any other event) can be seen in the video.  It would also help with the addition of captions or titles and help synch video from different cameras inputs.

  For me, being able to see the capture of time of each clip (and frame) is a replacement for the obvious digital age of the Council clapper, is there a reason why this feature (or lack of) is not more important?

  Any help or thoughts welcome.

  Premiere Pro can't do what you ask in itself.  My best guess as to why would be that it is not altogether appeal to such a thing in professional production, it is really more than an 'amateur' function to show the date and time on the screen.  The professional equivalent would probably be timecode, which PP peut show on clips, but time code usually has no relationship with the date and the time that the clip was recorded.

  For standard definition, the program DVDate was good to solve this problem.  I don't know if this software applies to high definition, or if another program can do the job.  You may need to search around.