Batch "save under" problem

Similar Questions

• Photoshop "save under" problem. Not automatically added .jpg extensions.

  Can someone please give me a tip?

  My old computer broke down and I bought a new one.

  In the past when I chose "save under" and then selecting the type of file ('Format' drop) Photoshop and JPG, I didn't have that typing the name automatically added ".jpg".

  On the new computer, it doesn't work anymore.

  Now I select "save under"... the file JPG of Type... I give it a name and... Photoshop saves without extension

  later, it cannot be seen when I want to open the file.

  That's happened?

  My system is Windows 7 Home Premium, as my old system.

  I guess because each of these issues that I have encountered was caused by points in the name of the file :)

• "Save under" problem

  I have dozens of photos to edit. After having finished editing a photo, I use the command "Save as" to save this photo retouched in a new folder. But next time, when I click on "save under" even once, ps do not remember the new folder and save it as dialog box opens the folder to the original recording. So every time after the photo editing, I have to dig into the new folder to save a revised copy.

  Without using 3rd party software, is there a way to let ps don't forget the new folder in which I did "save under"?

  Concerning

  If your cs5/cs5.1 read this page:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7720a.h tml

  MTSTUNER

• print not web page - menu "save under" if poster - unknown problem dialog box then appears. Only recently-, does not happen in Explorer?

  Try to print a Web page or a selection from them.
  When 'file' - select 'print' on the tabs of Mozilla, it doesn't. The print menu appears, but when 'print' clicked, the menu box "save under" appears. When "save under" is closed, a dialog box appears saying "unknown error during printing. Cannot print Web page unless a screen saver (ie the entire screen). This has happened only recently (update may). Tried it on Windows Explorer and all is ok

  After checking the problem existed in all places - found silly finger pain. When selecting 'print' noticed "Selected printer" had been changed from my normal i865 of "Microsoft Office Document Image Writer"!
  Once changed back all O.K.
  Thanks for your trouble

• I used Paperport 9SE for several years without any problems with XP. Now, because of a forced computer upgrade, I have Windows & OS. Now I find that I can't "save under" or "send to" Word.

  I used Paperport 9SE for several years without any problems with XP.  Now, because of a forced computer upgrade, I have Windows & OS.  Now I find that I can't "save under" or "Send scanned documents to ' MSWord' as suggestions?

  Hello

  Is Microsoft Office (Word) installed on the new Windows 7 operating system?

  If this isn't the case, install Microsoft Office must fix.

  If Microsoft Office is installed, try Microsoft Office. Follow these steps.

  a. click Start.

  b. click on Control Panel, programs and features.

  c. find Microsoft Office.

  d. right-click on Microsoft Office and select Repair.

  Now, check the question.

• Looking for script to change "save under" actions...

  I worked on a way to avoid having to re-record 400 + save as actions.  The nut shell, it's that I'm saving art game a master file.  The master file has some commonality to other parts.  So the actions turn on the appropriate layers, save then turn off these layers and repeat for all 400 + parts.   This way when the changes make all parts, it's a simple operation to re-record.  Create separate files 400 seemed like a way more heavy to go and have all the art in a single file makes more sense.

  The problem that I am running is that I had to change hard drives often and this means that the locations "save under" actions are no longer available.

  I tried every way I could think to create a workaround solution, but there is no answer that I've found so far.  The batch will not work because all the 400 pieces come from a single file.  I hope that script will allow me to treat at least "new folder" actions automatically.  I want to put in the new location of the shares ' record under "should point and click on 'OK', they are new" save under "recorded actions.

  Any thoughts?  Maybe available scripts that do this thing?  I'm wasting my time trying to get script to do this and who should just bite the bullet and spend 3 or 4 hours re-registration to save as actions whenever I want to save art to a new location?

  But to answer your main question. Yes, the script needs both highlight functions and load the symbols at the bottom in order to run.

• I want to download a file and do a "save under" directly in my working folder. Instead, it seems to save it somewhere as a generic term should I then copy, paste, and rename manually. Is there a way to rationalize this?

  I want to download a file and do a "save under" directly in the folder of my work. Instead, Firefox downloads somewhere with a generic name I have to copy, paste, and then rename the file. Is there a way to streamline this process simple?

  Options > general downloads section

  • If "Save files" is selected, all files will save the location shown without the intervention of the user.
  • If 'Always ask me where to save files' is selected, the user can choose the location and change the name of the saved file.
  • See-> window Options - general Board

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Page "save under" appears when I try to print from Firefox

  When I use my Verizon DSL and Firefox (this doesn't happen if I use Explorer int.) and I wish to print information from the internet, I do a Ctl P for print. Instead of print, I get a page "save under" I can not help to appear. The page includes: "save under" in the upper part with a box of savings to (E.g.: documents), then has a list in any of the 'name', 'Update', 'Type', 'Size' and 'Tags' in the upper part. Then, a list of items such as games, my stationery, new folder, Sansa Updater. Then at the bottom there is a list for 'File name' with an area for the name. Then under that a 'save As Type' (PDF). Then a backup or the Cancel button.

  This has happened

  Each time Firefox opened

  Is a month ago

  I can't print anything either on Firefox but on IE everything prints fine. I get as much better Firefox so would like a solution to my problem.

• Windows xp pro has "save under" appeasr when I start, why?

  On startup, I get a "save under" appears, it says that I need to 'protect' my system?  I got my person tech watch and he told me that it must be part of something that I recently added - a new prog or something 'up daed? I have no idea, except perhaps n 'Apple' d/l? An idea

  Hello

  1. You did it all change that caused the problem?
  2. What anti-virus program you have in your computer?
  3. Have you run a virus scan to check if there are infections of the system?

  Method 1: Run a virus scan to check if there are infections on the computer:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: If the problem is still not resolved, try to start the computer in safe mode with networking to see if applications are contradictory

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  If the problem does not occur in Mode safe mode with networking, we can use the approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  It will be useful.

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer crashes with move the file and lock MGP all MS Office upward when "save under" or move in the W - XP Pro - SP3 directory

  I can't make a "save under" with any office of PGE and only lift lock W Explorer with most activity file except moving deeper in dir.  I tried many things to fix, but do not provide me with XP disc and cannot reinstal Windows from Dell.

  Hi Tdonone,

  Looks like there could be a problem with the hard drive. its certainly worth running some tests on if possible. It is a dell machine you may be able to run a hard drive test when the computer starts by using the f8 key, but if not you must download a free software called theultimatebootcd and burn it to a cd and then start the computer on the cd and use the software on the disk to perform checks on the hard drive. To help do this see here -http://www.mypchealth.co.uk/GuideTests.php

  MyPcHealth

• "Save under" in PowerPoint automatically decompresses the pictures?

  "Save under" in PowerPoint automatically decompresses the pictures? If so, is there a way to disable this option? I resized a photo (at 38%) then "save under", after which the resized image was of 100% to the new size. I prefer to keep the pictures uncompressed until I want to compress.

  Hello Ykt28403,

  Thank you for your message.  The answer to your question is Yes, compresses PowerPoint files.  I've included the link to Microsoft Office for your comment, this article explain with the compression and the characteristics of layout of images in a presentation and allow you to make the appropriate changes.
  http://Office.Microsoft.com/en-us/PowerPoint/HA011168821033.aspx
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WinHlp32.exe opens spontaneously whenever I have something enter in a text field (like "save under...") (', or this field!).

  WinHLP32.exe opens spontaneously whenever I have something enter in a text field (like "save under...") (', or this field!). Sometimes multiple openings, it seems that the system becomes unstable.  Any program: IE Explorer, Photoimpact, Word, etc... This began a few days ago, no new installed program or any change in the system. Vista Home Premium 32 bit Dell Inspiron 531. Protected by McAfee.

  Real help would help...

  Original title: winhlp32.exe opens spontaneously

  Hello

   
  I suggest you to perform following steps and check with the question.
   
  Method 1:

  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  
  Method 2:

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
  
  Method 3:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   
  Method 4:
  I would suggest you to download the appropriate Windows Help program (WinHlp32.exe) version, depending on the operating system you are using and check if the problem persists. To download click on the link below:
  Windows Help program (WinHlp32.exe) for Windows 7
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=91
  
  I hope this helps.

• Save under...

  When I go to save a file... save under... It opens with always save in html format. How can I change that I don't always have to click on the arrow down and save it in format of messages to oulook?

  Thank you.

  Here is an article including a link on how to change the default save as type in Outlook (it's one will move it): http://office.microsoft.com/en-us/help/HP052428051033.aspx.  I'm not sure this will do what you want it to do, but it's all I could find.

  If this does not help, please transfer your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.outlook.general&lang=en&cr=US where experts in Outlook will be more than happy to help you with your question.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Save under" in Word, the excesses and the Outlook causes the program to close. Why?

  I've had sporadic problems in save documents in Microsoft Word, Excel and Outlook for a few weeks now, but it becomes more and more frequent and more and more embarrassing. I have no problem opening documents, but if I try to ' save under ' and sometimes 'save', the rotation disc appears on the display followed by the screen goes pale with an error message saying that Windows is trying to find the problem but he then is firm and sometimes restarts and retrieves the document but I can't always save the document to a new file when it goes through the process , then closes. What can I do to stop it?

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Word Help Forums at the link above.

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your question to Office when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner