"Intruder detected chassis.

Similar Questions

• PXI-1042 q with controller 8331

  HI........

  I want to configure a single chassis PXI-1042 q with controller PXI-8331. I have connected 2 I\O Digital Digital card (PXI-6515) and 1 card(PXI-6514) I\O to this chassis. And I have connected this chassis to my PC with the serial cable (OR standard cable on COM 1) on my PC. But the problem is when I opened and Measurment Automation explore it dose not detect chassi eithre or any card I\O.

  I installed OR version 4.6.1 platform services.

  An obsrevation is led RX ON Chassi and dose led TX ON PC does not illuminate.

  Please guide me step by step configuration.

  Thank you

  Pravin.

  PBL,

  The PXI-8331 is not a serial interface, even if the connector looks like it, so it should not be connected to COM1.  It works when it is connected to a PCI-8331 in your host PC.  The cable must be a MXI-4 cable, for example 190957-03, not a cable series.

  If that's what you do, please report the LEDs on the two cards.

  -Robert

• How can I know when ive been hacked

  a fake hotmail was created with my photos sent to people ive never met or spoken to and the pictures that were on my computer that I thought I had deleted have been recovered and used!

  Hi, Robert Ruelas,.

  Compromised account, unauthorized access

  You encounter connection problems with your Windows Live ID? This usually happens because that...

  • You forgot your password.
  • Someone has stolen your password and use your account to send spam. We block the compromised accounts to protect you and your contacts, but also to help you recover your account.

  The best way to regain control of your Windows Live account is to change your password. Thereafter, you must ensure that your account information has not been changed by the attacker. Otherwise, it could take control of your account again. Here are the steps you should take to regain control of your account:

  1. You can still sign in with your Windows Live ID address email and password? If you can, you should change your password.
  2. Are ask you your mobile phone number after signing in? At sign in, we can ask for a mobile phone number in order to send a text Message with a secret code that you enter. This prevents spammers from using your account.
  3. If you are unable to connect, try to reset your password.

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  How can you tell if your system is under attack?

  You notice something odd on the behavior of your system? Chances are that your system may be compromised. Your system may have been compromised signs include:

  • Exceptionally low network activity, disconnection from the network service or unusual network traffic.
  • An alarm system or a similar indication of an intrusion detection tool
  • Suspicious entries in the system or accounting of the network (for example, a UNIX user obtains privileged access without using approved methods)
  • Accounting discrepancies (for example, a person opinion gap a 18 minutes in the accounting log, in which there is no correlation)
  • Failed logon attempts
  • New user of unknown origin accounts
  • Log entries unusual such as the network connections of unknown computers or services, connection failures.
  • New files of unknown origin and function
  • Unexplained or attempt to change the size of the files, check sums, date/time, stamps, including those related to ExΘcutables systΦme or configuration files
  • Unexplained addition, deletion, or modification of data
  • Refusal of service or activity of the impossibility of one or more users to connect to a account; including connections to the admin/root console
  • System hangs
  • Poor system performance - system seems to be slower than normal and less sensitive than expected. (Note: unexplained disk activity may be due to the system maintenance records such as cleaning of disk files while the system is idle, this is normal.)
  • Any unauthorized use of a program or adding an application of sniffer to capture traffic network or names of username/password
  • Port-scanning (use of the exploit and scanners of vulnerabilities, the remote queries for more information on the systems and/or users or social engineering attempts)
  • Use unusual times (statistically, greater security of the incidents occur during working hours than at any other time)
  • Once indicated the use of one account which does not correspond to the true last time of using this account
  • Unusual usage patterns (e.g., programs are collected in the account of a user who does not know how to program)

  For more detailed help to determine if your system could be compromised, please see the following information from the center of Coordination CERT:

  CERT Windows NT intruder detection checklist

  CERT Unix intrusion detection checklist

  http://security.Tennessee.edu/hacked.shtml

• Error 512 - fan chassis rear not detected

  Hello

  Just unpacked my birthday gift today... a brand new and shiny, HP Pavilion HPE-595uk (yay!).  My husband purchased directly from HP, about 3 weeks ago.  It has been used until today.  (Happy birthday, me!)

  However, on first switching on, I received a message from bios:-"512 - undetected, rear chassis fan error press F1 to continue"

  I pressed F1 and start continued, Windows 7 is installed, everything seems ok... I'm talking about (entered) to you on the PC right now.  However... If I have to powercycle the PC, I get the error (error 512 - rear, chassis fan not detected, press F1) every time.

  That means there is a problem with this PC? The rear chassis fan should be detected?  If a cable is loose?  All new PC remember... just out the box 2 hours.

  Thanks for the inforfmation.  I just started my new computer that has the message 'Error 512 - rear chassis fan not detected'.  Rear fan connector had a bent pin and the connector has been sitting on it.  Pushing the stem with long nose pliers and a small screwdriver it fixed and enabled the connector to connect all the way and everything is fine.  Be sure to remove the power cord from the back before you do.  I did not, and the button was hit during the removal of the side panel.  Since I was a SDS I heard the computer turn on - I was lucky is not to run out of something!

• Problems with NI-VISA 5.0.3 detect a 9474 cDAQ chassis and modules via USB

  Hello friends.

  I'm running Windows 7 x 64, I installed MAX 4.7.4, NI-VISA 5.0.3 and the other software that comes with them.

  I have a 9174 cDAQ chassis and 3 modules.

  My problem: when I connect the hardware to my PC via the USB port, it presents itself to the MAX, but NI-VISA does not detect sub "USB" (or elsewhere).

  Purpose: What I'm trying to do is communicate with the NI 9223 module, using VISA through MATLAB commands.  The MATLAB data acquisition Toolbox supports not the NI 9223, so I would try to acquire help from VISA.  However, I don't find the VISA of the device address.

  I would like to know your opinion on why modules are not displayed in NI-VISA and if my ultimate quest is valid without doing something nasty like writing C++.  I have not found a good source for VISA OR orders either, but I'm sure it exists.

  Thank you!

  Wes

  Hey eccentricorbit,

  Unfortunately, you can't talk about a module using VISA or cDAQ chassis. Your options are DAQmx and low level of coding (something nasty like C++). If you do not get DAQmx, you can find excellent examples by accessing:

  "" "Start menu" National Instruments "NOR-DAQ ' text Code support ' ANSI C examples

  I hope this helps!

  ~ kgarrett

• 6361 versatile usb data acquisition does not automatically detect the SCXI chassis/accessories

  versatile usb data acquisition 6361 will detect automatically SCXI chassis and accessories?

  Hello kdCMC,

  As far as I know that the SCXI-1600 USB Module is able to auto-detect SCXI Modules.
  This is also mentioned on page 11 and 12 of the following SCXI to start document:
  http://www.NI.com/PDF/manuals/373236m.PDF

  All data (including USB-variants such as the NI USB-6361) have only a 68 pin shielded cable (IO) between the DAQ hardware and the SCXI chassis.
  This cable does not auto-detect opportunities since it basically just "transfers analog and digital signals" between SCXI chassis and DAQ hardware.

  Is there a specific document that created the confusion on this subject?

• Modules in the PXI-1033 chassis detection problem

  Hello

  I met difficulties in operating my PXI-1033, which installed two strips of XIA Pixie-4. Until recently the system was working properly, but now I am unable to detect and use modules using software of XIA, although according to Windows both modules are "working properly". Nothing has changed between the time it was working and now (that I know)!

  I suspect the problem involves the chassis, since when I place a module in slot 6, the chassis will not be powered. It will power-up with any other occupied housing.

  Any help would be appreciated.

  See you soon.

  Hello jnod,

  At these modules never appear in measurement and Automation Explorer (MAX), if so they appear actually now?

  Also if you have other material, I'd be interested to know if the PXI chassis will start when you have a module IN slot 6.

  The chassis won't start when either module Pixie-4 is in slot 6?

  You probably already know, but turn you on the chassis PXI before you have activated on your computer?

• 512-chassis fan not detected

  Hi all

  I h8-1114 office and I put the card mother and hardrive in case Antec 900. I got message from BIOS 'fan of 512-chassis not detected. " From this point, I have to use F1 to start.  I know that this rear fan is no longer connected to the moetherboard. Really, I is not necessary that fan because Antec 900 has a much better fan system. Antec fans are huge and not connected to the motherboard.

  I tried to disable this BIOS message in the BIOS settings, but it seems that there is no option. What should I do to disable this message and start without the use of F1? Thanks a lot if anyone knows.

  ramburak,

  Connect the rear fan on the motherboard or use the left side mount for the original fan option. If you use the rear fan, don't forget to put the fan at maximum speed.

• Satellite A205-S5880 (PSAE3U) downgrade Vista to XP - does not detect HARD drive

  Hi all
  I got this hair loss situation, I had a satellite A205 - S5880 (PSAE3U) and decided to downgrade to XP, I got all ready drivers for XP (I have the EMEA support site and the wireless from a Czech website), I have my windows XP SP2 g CD and I get after loading everything Since the CD that my HD is not detected or not recognized and it tells me to make sure I have connected (I know I do).

  After doing a search of loong on the web, I discovered I have need the drivers (or something like that) to my HD which is a Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA). My bios won't let me put my SATA to IDE (or something like that) also to update and nothing, please I need my Windows XP CD to read my HARD drive, and I can take care of the rest (at least I think so, otherwise I'll ask again: D).

  I also found that I can watch my motherboard chipset for motherboard for my HD controller, it ' s (i think) a toshiba ILHAM v1.00 or Intel Crestline - GM GM965.
  Maybe this info also works: Intel ICH8M

  I would totally be apreciate all the help, thanks in advance. I am able to give any other information you want
  in any case here is a summary of my pc with everest
  ================================================== ================================================== ========================
  SUMMARY OF EVEREST
  ================================================== ================================================== ========================
  Computer
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium
  OS Service Pack Service Pack 1
  Internet Explorer 7.0.6001.18000
  DirectX DirectX 10.0
  Computer name USER-PC
  Name of the user
  Domain logon user-PC
  Date / time 2009-05-02 / 21:37

  Motherboard
  CPU type Mobile DualCore Intel Pentium, 1866 MHz (14 x 133)
  Card mother name Toshiba Satellite A205
  Motherboard chipset Intel Crestline - GM GM965
  Memory system 3061 MB (DDR2 - 667 DDR2 SDRAM)
  DIMM1: Micron Tech 16HTF25664HY-667E1 2 GB DDR2 - 667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  DIMM3: Hynix HYMP112S64CP6-Y5 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  Type of Phoenix BIOS (15/05/08)

  Display
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Accelerator 3D Intel GMA X 3100
  Monitor monitor generic PnP [NoDB]

  Multimedia
  Audio adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio Controller

  Storage
  Controller IDE controller Intel(r) ICH8M SATA AHCI - 2829
  Controller IDE Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
  IDE controller Texas Instruments PCIxx12 Integrated FlashMedia Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA)
  Optical drive MAST * a DVD-RAM UJ-850 s ATA Device (DVD + R9: 4 x, DVD - R9:4 x, DVD + RW: 8 x / 8 x, DVD - RW:8 x / 6 x, DVD - RAM: 5 x, DVD - ROM: 8 x, CD:24 x / 16 x / 24 x DVD + RW/DVD-RW/DVD-RAM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) 125915 MB (102380 MB free)
  D: (NTFS) 64863 MB (12885 MB free)
  Total size 186,3 (112.6 free go-go)

  Entry
  Standard PS/2 keyboard keyboard
  Alps Pointing-device mouse

  Network
  Main IP 192.168.0.199
  00-1B-9E-FB-8B-DF main MAC address
  Atheros AR5007EG network (192.168.0.199) adapter wireless network card
  Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0) network card
  TOSHIBA Software Modem modem

  Devices
  Printer Microsoft XPS Document Writer
  Printer send to OneNote 2007
  Controller FireWire Texas Instruments OHCI Compliant IEEE 1394 Host Controller (PHY: TI TSB41AB1/2)
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB camera Chicony USB 2.0 Camera
  USB device USB Composite device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version V5.60
  TOSHIBA DMI system manufacturer
  DMI system product Satellite A205
  DMI system Version PSAE3U-08C023
  DMI 68221541 K-system serial number
  DMI system UUID EA88852C-3BD111DD-968C001E-EC3CB59A
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product ILHAM
  DMI Motherboard Version 1.00
  DMI Motherboard Serial number 0123456789AB
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version n/a
  DMI chassis serial number, no
  DMI chassis asset tag *.
  DMI chassis Type Notebook

  ================================================== ================================================== ========================

  Hello!

  You will find hundreds of discussions here in the forum about this, if you install Windows XP and Vista from a Microsoft disc and the HARD drive can't be detected... So he s strange to read these questions again and again.

  However, to install Windows, you need the SATA drivers or let's say the Intel Storage Manager package. It contains the driver you need. You can then create a new installation using nLite [www.nliteos.com]
  Or look you at this Toshiba document: http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm

  Good bye

• Update Bios Z400 - now "fan chassis before error 513 not found' I don't have a front Chassis Fan!

  This machine of LOVE and just build one for the gills - power of 600 watts (oem) recently added as well

  Has made updating the BIOS and now it is stuck at the start with 'chassis before 513 error not detected fan' - I can F1 passed and everything is good, but of course I need a fix for this.

  This device does not have a front chassis fan.

  I'm a NEWBIE here and would certainly appreciate some entries.

  Thank you

  David

  Not a windows experience rating bad, huh?

  Such as already reported here, over, do a search for "Ghetto Mod.  There are two main positions for this of me, one for the xw6400 and another for the xw4600.  Your case best fits the xw4600 case, but there is more information about Noctua in the xw6400 post.

  Read both... the answers are all there.

• Incompatibility of pilot PXI 5105 and unable to be detected by OR-SCOPE FPS with NO-SCOPE installed 14.1

  I am setting up test bench and just add a PXI-5105 card to my chassis SMU-1078.

  I currently have NO-SCOPE 14.1 installed on my PC host and target RT.

  When I try to run the Test panels in MAX, I get the following error:

  

  If I try to launch SFP-OR-Scope, it does not detect the card of the scope:

  

  The map seems to indicate as normal in my remote systems in MAX.

  For the host, the Installation of NOR-SCOPE includes:

  • Configuration support 14.1
  • 14.1 development support
  • 14.1.1 duration

  For the target RT, Installation of range OR watch as 14.1.0.

  I even checked in the feature add/software for the remote system see if a driver incompatibility was actually present:

  

  I have also confirmed in the Readme that PXI-5105 is supported OR-SCOPE 14.1.

  I'm kind of dead in the water on other ideas to investigate on concerning the system is behaving properly with the new card.  Other ways suggested for study?

  I continued to play with setting up more and find my VI has been targeted my Windows host instead of the goal of the RT.  I'm nowable to see my map of scope 5105 now through Labview + RTM.  Thank you for tolerating a newbie.

• nxSystemOpen returns without interfaces or devices up to what MAX is started and chassis reset

  I'm writing an XNET application. My problem is that I can't detect or connect devices or interfaces until I throw MAX and reset the cDAQ (NI 9191) chassis that contains the module CAN (NI 9862) on hardware powered. Once I do this, the application works. I can unload MAX and the software will continue to work until I cycle power on the chassis. Examples of programs behave the same way. What can I do by program for my users do not have to launch MAX first?

  You can use the API of Configuraiton of NOR-system to detect cDAQ/XNET devices and then configure them to use programmatically. Most of the things you can do in MAX can be done programmatically through the API of Configuration of the system. It includes even some examples in specific material input and output-> System Configuration even if they aren't XNET.

• PXI-8532 DNET card is not detected in MAX

  Hi all

  I use NI PXI-1031(4 slot PXI chassis). I have the following cards in the respective locations
  Slot 1 = controller PXI-8106
  Slot 2 = PXI-6259 card (I)
  Location 3 = card(DI,DO) PXI-6509
  4 = Card (DNET) PXI-8532 accommodation

  Max (Measurement & Automation Explorer), I expect the cards above (PXI 6259, 6509 & 8532) to be detected under devices and Interfaces. But only cards and DIO are detected in MAX under deported systems > PXI > devices and Interfaces.
  PXI-6259 (PXI1 Slot2)
  PXI-6509 (PXI1 Slot3)

  The unit net card, PXI-8532 is not detected in Max MAX shows / detects the DNET card?

  In MAX, I chose the menu Tools > NOR-DNET > RT Hardware Configurations. Then a window prompt you for IP address of RT. After you enter the IP address, I pressed OK. A message appears that no device is found.

  Can someone help me how to detect card DNET in MAX and make the configuration of the port DNET?

  DNET - 1.6.4 driver version

  Thank you
  Raja

  I try to answer two questions:

  1. the new APUI is compatible with the former, but if you use screws with the old APi you need to replace the screws with the new. There is a white paper related to the download page and here it is again that explains how.

  2. the devicenet driver does not yet support the plugin for the view of the PXI chassis. It appears under devices and Interfaces, and the name is not editable either. Currently the driver uses the numbers in the order of detection if several cards are present.

  Two things will look in our next version before the end of this year.

  DirkW

• NI 9148 with LabView module detection

  Hello

  I got the task of creating a deployable (compiled) software to a DAQ system with NI 9148 Ethernet RIO basket background and various modules. The user must have the ability to change the module type and the location of the different tests, so the application must detect (or the user specify) what modules are at what positions.

  I watched the blockset CRY, however this chassis is not supported and the lowest level blocks are protected. Is it possible to read the serial number of the modules connected to the 9148 OR position, type, and if all goes well?

  Thanks for any help!

  Hello Soonxaf,

  What are you helps as a controller-is this RT or Windows? Are you planning on the use of analysis of RIO or LabVIEW FPGA engine?

  If you plan use the analytical engine, so this should help you get started:

  Tutorial: Discovery, Configuration and programming access of the CompactRIO Scan Mode to IO with LabVIEW

  http://www.NI.com/white-paper/9351/en

  Kind regards

• SCXI-1102/SCXI-1303 undetected in SCXI-1000 chassis

  I use an installer with the SCXI-1303 module in an SCXI-1102 module in a chassis SCXI-1000 measures voltage and thermocouple.

  Until recently, everything worked well. but now it seems that I am unable to communicate with the interface. I've tried two different computers and hardware is not detected in MAX. The power light and fan on the SCXI-1000 chassis light again, it just seems to be no acknowledgement of the connection to the computer.

  A few more specific error codes:

  * When I double-click on the DAQ Assistant, in the block diagram window and click on 'Test' one of my entries, I received the following error message:
  "88705 error: the specified device is not present or is not active in the system."

  * I also got the error code "error-89130: not available in NOR-DAQmx device" in Control Panel test DAQ Assistant

  * During the closure of the DAQ Assistant test Panel, I see the error "error-89130: device not available for routing.

  * To the MAX, if I try to 'test' the chassis or the module, I've seen errors either saying that the device is not detected, or that the device must be reset or is being restored, or the traditional DAQ drivers must be reset (I tried the reset suggestions without result)

  At this point, I wonder if the Commission or the cable is pulled. Unfortunately, I don't have an other 68-pin cables to test at the moment.

  Thanks in advance...

  Thanks guys, I was able to solve the problem. To all those who might find this,

  * I noticed in the Windows Device Manager that two PCI devices have been listed as being not installed correctly.

  * After trying to update the drivers, I couldn't start the computer; got BSOD after the BIOS loading.

  * Some research led me to go out two PCI cards that I was not using, and I moved also to reinstall my data acquisition on an another slot card to force material.

  * Starts up, load drivers automatically and I'm gone.

  Doesn't explain not why it did not work in the other computer, but in the words of Spinal Tap, the authorities have said it was better left unresolved at this point.