BatchLoader to create folders and files of consignment

Similar Questions

• External hard drive creates folders and files and lose the music I synced to it.

  I've been struggling with my 8 GB Clip +, which is the same thing my old 4 GB Clip + has. It creates files SID and incorporate in the album folders. Renamed it with records of the characters of 8 or 9 (alpha and digital) at the beginning of the file name, and some of the music I download does not exist when I disconnect the player and it refreshes. It does this for MP3 AND WMA files, if I use Media Player or Windows Explorer.

  I loaded all my WMA files on the internal hard disk (that works absolutely perfect), responsible for MP3s ONLY on the external hard drive and got the same result. The external hard drive has been reformatted, there is no debris of what anyone to spoil things. Any ideas would be greatly appreciated.

  Thank you!

  So after spending most of my Sunday with my 8 GB Clip + and its 8GB external drive, I found that the problems mentioned previously disappear if opt you for USB mode MSC. I was then able to transfer MP3 and WMA using Windows Media Player or Windows Explorer. I even got to explore open and hung out and deposited the files in window Media Player sync. Very Cool! Also, when I tried to copy something that she already had, he said that the case was already transferred. Amazing! In the past, it should continue to record the same.

  Although I must say that a WMA file problem: some of the music files were not correctly identified and is not 'stick' to the albums they came from. But a search for individual songs revealed they were always there, even if the Sansa could not "identify the album they belong to.

  I hope this helps others. At the end of the day, my advice is: If you have an external drive, the USB MSC mode, and you won't have any major problems - just a few small, boring ones.

  And thanks for the two of you who responded to my original post. Yes, the player has been on auto-detection mode - not good.

• Create folders and move files by reading csv

  Hello guys,.

  That can create a script to read csv and create folders and move files into the folder.

  My csv will look like

  

  There the names of folders and file names, I kept my files (Mention in the 'File name' column) in the office. When I run the script it must read the csv file and create the folder (depending on the "folder names") and the correct file must move in the particular folder. Hope I have clear requirements.

  So we need 4 above csv files and the respective files must travel in their records. Need help!

  Thing may have changed as I've tested with CS6.

  Please try then.

  #target photoshop;
  main();
  function main(){
  var csv = File.openDialog("Please select CSV file.","CSV File:*.csv");
  if(csv == null) return;
  var sourceFolder = Folder.selectDialog( "Please select source folder");
  if(sourceFolder == null) return;
  var data=[];
  csv.open('r');
  while(!csv.eof){
  var InputLine = csv.readln();
  if(InputLine.length > 3) data.push(InputLine);
  }
  csv.close();
  for(var f in data){
  var dataLine = data[f].split(',');
  var folderName = dataLine[0].toString().replace(/^\s+|\s+$/g,'');
  var fileName = dataLine[1].toString().replace(/^\s+|\s+$/g,'');
  var file = File(sourceFolder + "/" + fileName);
  if(!file.exists) continue;
  var outputFolder = Folder(sourceFolder + "/" + folderName);
  if(!outputFolder.exists) outputFolder.create();
  if(file.copy(outputFolder + "/" + fileName)) file.remove();
      }
  alert("All Completed");
  };
  

• I lost all my folders and files from all contexts of my. Is there a way I can find my file and contects and transfer them to my new email address?

  folder and transfer contects

  Some used body my e-mail and now I have to create a new account. I lost all my folders and files all my contects.is there anyway I can find my file and contects and transfer them to my e.mail new address, I am one who is suffring now .i should add every thing from the bigning.i had this acct almost 10 years.

  If you use Outlook Express, then locate the *.wab computer.  If this is not the case, then you must be specific to the subject what email program you use, and what form of e-mail account you have and what operating system you are using, as your questions depend on this, and we have no idea if not.

  Steve

• How to pin folders and files to the taskbar?

  I have a few updates from XP to Windows 7.  How to pin folders and files to the taskbar?  I got a lot of these in my XP Quick Launch bar.

  Mike

  PIN Windows Explorer in the taskbar and you can right click to get your recently viewed files.

  You can also add toolbars to the taskbar.
  http://Windows.Microsoft.com/en-GB/Windows7/add-a-toolbar-to-the-taskbar

  A toolbar can be any folder in Windows Explorer. So you can put any selection of files to a user created folder and access these files quickly thanks to a simple icon in your taskbar.

  However, don't go overboard you can quickly run out of space on the taskbar. My toolbars are interspersed between the program pinned to the taskbar, tasks and links with the Noification area to the right. The section of the program will go to a second line below according to the needs and so you can limit the space allocated to programs if you wish.

• In Windows 7 Windows Explorer shows do not all drives, folders and files?

  I have windows 7.  In older versions, Explorer windows would list all drives, folders and files.  It makes it easy to move, copy, create folders.  Is it possible to get mine to do the same thing?

  Click on the Start button and then on the images in the list on the start menu, top left is organize, click on this list, then click on folder and search options, go to the view tab section, search for and click Show hidden folders files and readers, click apply and OK.
  

• What has changed on my computer? I was able to create folders and can no more do this...

  What has changed on my computer? I was able to create folders and can no more do this... I have Windows 7 with Microsoft Office Home and Business 2010... before uninstalling some software yesterday, I could create a new folder. now I can create is no longer a new folder.

  How can I solve this problem?
  Thank you

  Hello Annette,.

  It is a problem for a long time under Windows 7. To solve it I recommend that you only install the following program - FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Bookmarks Manager no longer exists on 7.01. How to create folders and organize my favorites?

  Bookmarks Manager no longer exists on 7.01. How to create folders and organize my favorites?

  I don't use a Mac, but I think it is similar. Organize bookmarks, is renamed the show all bookmarks option.

  • Seecreate bookmarks to save your favorite Web pages

• without doing anything, my office has open all folders and files

  without doing anything, my office has open all folders and files

  I should correct that, but I don't know how.  He opened folders and listed files all over my office.  How to bring back the old desktop computer?

• How can I access folders and files under % CommonApplicationData %?

  How can I access folders and files under % CommonApplicationData %?

  It is able to access through explorer.exe?
  Thank you.

  Hello

  Thanks for posting the query on the Microsoft Community Forums.

  Looks like you need assistance in accessing the files and folders under % CommonApplicationData %

  The directory that serves as a common repository for application-specific data that is shared by all users is CommonApplicationData.

  a. Click Start.

  b. Select run windows.

  c. Enter the following command

  d. %systemdrive%\Documents and Settings\All Users\Application Data

  e. the folder will be opened.

  Hope this information helps. Get back to us if you have related queries about the issue.

• I have a laptop running XP pro with office 2003. All of a sudden all the folders and files in the folders have read only attribute applied.

  This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
  Any solution to this problem s.

  Dave

  It's not a problem... it is a feature.

  At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized.  There are other methods available if you really don't want to do a write-protected file.  The details are explained in the following Microsoft KB article.  I recommend reading the article in full to understand what Microsoft did...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
      <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• I want to print a complete list of the folders and files that are on C:, but do NOT want to use &#60; PrntScrn &#62;. Is there another way? (Windows XP home edition)

  Print out c: folders and files.

  Such a command would be:

  dir d:/press s > %userprofile%\Desktop\directory.txt

  who will place the file on your desktop.

  But you'll probably find Directory Karen printer is easier and more convenient to use.

• Within the last week, that all the folders and files on my hard drive were selected 'read only '.

  I unflagged all the folders and files that I share on my home network, however, I am not able to rename them or save them on my PC from my laptop on my wireless network. This has happened since May 12 and I suspect an auto update changed or recover from something.

  Running Vista Home Premium SP2 on PC

  Laptop is Windows 7

  Thanks for getting back to me Mick!

  I did a restore to 5/10 when I had no problem, but the problem persisted.

  I'll have to try Norton support. This may be something they did.

  In the meantime, I managed to change the names of files by connecting to the PC with the account of my wife who as co-owner had equal rights and the sign of the laptop is its ID as well so it worked, but it isn't always fair.

  Once again, thank you...

• Right click mouse to drag and drop or rename folders and files does not work

  For a few weeks now, I had problems with the right click function to drag - move files and folders, or rename files and folders. This happens when I use windows Explorer or access to the computer and click thruogh for a feature. He can't go to all the folders and files, but many. I can't right click on these folders or files to change the sharing because explore closes and restarts on the desktop with a right-click. Manifest error "appcrash" reason. I have Norton Security suite installed and neither Norton or your fix program detects a problem.

  Please notify.

  awehnert

  Have you installed or removed/uninstalled all hardware or software or drivers since just before the start of this problem (if so, exactly what - name, version, device, whatever)?  Norton take any infection, although it is said that he cleaned their since just before the problem started?  If so, you know the names of these infections?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  It's been a while so I'm not sure that you have a fairly old restore point but it is possible - hopefully.

  Are these files and folders in your user profile?  If Yes, your user profile may become corrupted (in fact, if can still be corrupted if the folders are not there).  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  We will check some of your system files and hard drive for ccorruption that may be the cause:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to start at the next startup.  Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Please checkwith the manufacturer to find out if there is a mouse driver updated (software or firmware) available for your make and model of mouse and your version of Vista.  Download and install to update the driver to the most recent available and see if that solves the drag and drop problem (even though I know that this will not affect the question of the name change).  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it doesn't (or if SFC detects corruption it cannot repair), we you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.