Error messages when you try to retrieve satellite L300 Vista
I have a Satellite L300, which keeps freezing upwards so when I tried to do a recovery I got an error message 10 D 045 fa12 and when I tried to completely erase the disk, I got an error of the FFE 20 045D
This unit was sent to toshiba for repair and technicians said there was nothing wrong with the unit, but my research tells me there is probably a fault requiring the replacement of the HARD drive - so now that my warranty just expired do - what I do? Can I still take the unit for repair since the issue of original warranty has never properly addressed? or is there a way I can fix the error?
If the warranty has expired, this can be a problem now, but I wonder why you did not react immediately when you saw that there is a problem.
On this forum, you can find several threads with the same problem and if you have time try to read this that people writing here.
I can imagine there is problem with HARD drive, the HARD drive can be replaced but you can do it alone.
It's really not a big deal.
Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004. Please notify.
Welcome to the windows vista forums.
1. stop the Windows Update service (make sure that you are logged on as administrator)
Click the Start button | Control Panel | System and Maintenance | Administration tools
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click on stop.
2. Click Start, type %windir%\System32 in the search box and press ENTER.
Find and rename the folder C:\Windows\SoftwareDistribution.
3. start the Windows Update service
Start button | Control Panel | System and Maintenance | Administration tools
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click Start.
This procedure will erase your history on the Windows Update Site. Not important.
Don't forget to restart and then try the update again. If there is no corruption in that
folder, it would be gone now.
Please, try now to windows update and check if you get the error.
You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:
I hope this information is useful.
Please let us know if you need further assistance.
Rehman - Microsoft Support
I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.
What should I do to fix this?
Thanks in advance,
· When exactly do you get this error?
· You have windows XP INSTALLED on your computer?
Try these steps if you have windows XP INSTALLED on your computer.
To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.
To disableActivate the disk write cache, follow these steps:
1. click onStartand then click my computer.
2. right click on the hard drive, and then clickProperties.
3. click on thehardware tab.
4. Click to select the hard drive, and then clickProperties.
5. click on thepolicies tab.
6 clear the boxenable the disk write cache , and then click OK.
7. clickOK to close the disk Local (c) properties dialog box.
8. Repeat steps 3 through 5 for each hard disk that is installed on your computer
Make changes in the registry
1. start the registry editor.
2. Locate and then click theenablesecuritysignature under the following key value in the registry:
3. on theEdit menu, click modify.
4. in thedata value: box, type 0, and then click OK.
5. exit the registry editor.
6. stop and restart the service server,or restart the computer
Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
If you have windows 7 installed on your computer try running printer utility.
I hope this works.
Bindu R - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP. Any ideas. Tried the factory returned. He was knocked offline when someone dug into the telco cables.
I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2
It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility. Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it. My VPN works much better without AirPort Express connected.
Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.
If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.
As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.
But it's your call.
Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?
Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?
It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 22.214.171.124. Go to http://siteadvisor.com and click on download. This will fix the problem.
Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.
Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct. Contact your network administrator to make sure the proxy server is working.
Go to Options > advanced > network > connection > settings, then choose 'no proxy '.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.
After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?
After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)
It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.
The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.
Original title: C:\windows\system32\icacls.exe
For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection. Whenever I do; try to download something or download something, I get the following error:
WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.
I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.
Any suggestions? I really need to download Trend Micro.
See the article below:ID of the KB Article: 2588679.Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."
Check the following settings:
Right-click on the downloaded file. Select Properties.
Click the Unlock button.
Check the suggestions the following threads:
Let us know if that helps.
I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003
I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
One of the installation files seems to be corrupted. HR:0 x 80070003
Thank you for using the Microsoft answers Forums.
You cannot install some programs or updates.
Reset the Windows Update components.
That should solve the problem for you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).
I searched night and day for a solution - even contacted microsoft by e-mail. The specific error is: Code 57F
It is displayed when I press the "get help with this error message:
It was the E-mail feedback:
Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.
I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.
Understood the factor of masking - has considered it. Still, I send my appreciation in this matter. I would like to know if you think I should download the SP2 for Vista.
Service Pack 2 offered by Windows (automatic) update yet?
This problem can occur for different reasons. However, the following reasons are the most common:
- Already, you have the service pack installed and do not realize it.
- You must install another update before you install the service pack.
- You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
- Components of the system that you must have to install the service pack are not installed on your computer.
- You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
- You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack
Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009
See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
The MS KB article below has sound advice for steps, you have to take before installing a Service Pack
Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation
Start here - free support for Windows Vista service pack problems
If a problem occurs, you can also solve problems installing yourself-
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
MowGreen MVP Data Center Management - update of safety Consumer Services
Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.
Original title: trying to download
WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.
Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system. the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ? I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.
It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."
Thanks a lot for any assistance.
· You have Microsoft Security Essentials on your computer?
If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.
You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.
You can turn on or turn on the firewall in Windows XP, please see the link below:
I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect
If you are running Windows XP... There is a slight chance
that by running the following command would be the fix:
Reach... Start / run... and type or copy / paste the following text:
Then... Press on... Come in...
You should see a dialog box stating:
DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful
There is debate on this subject in the following forum:
Windows Movie Makers Forums
An unknown error has occurred
I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this
I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.
- What is the error message when you try to access the internet?
- You use Internet explorer to access the internet?
- Did you the latest changes on the computer?
- What is the type of internet connection you use?
- You have security software installed on the computer?
- How do you know that the computer is connected to the internet?
Check if the problem persists in mode safe mode with network mode and post back with the result.
A description of the options to start in Windows XP Mode
If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails, then reset TCP/IP on the computer and check if that helps.
How to reset the Protocol Internet (TCP/IP)
How to troubleshoot connectivity TCP/IP with Windows XP
I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __
I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".
But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.
To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?
Thanks for any help.
You have a corruption of dbx file easily corrected.
Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
Why you don't need your anti-virus to scan your email
Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
Compact often as specified above.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA
I received the following error message when you try to print a document.
"Spooler subsystem App stopped working and was closed. Production of Windows warn if the solution is available.
I have not had any problems with my printer up to today. How will I be notified by Windows and is there anything else I can do.
Are you facing this problem when you print using all applications?
Take a look at:
Maybe you are looking for
My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?
Someone at - he lived small insert DVD / disc to the macbook pro 2013instead insertion standard size; I did and I can't he ejected now! Need help... Thank you
I looked and I do not think that someone posted a fix or a solution to the problem. On each droid initialize. The error message "Update security settings" appears in bar. I click on the message and nothing happens. It took me before on my corporate e
There are 4 leds to the left of the power switch the caps lock the NumLock thought or something and the z led the z led is always on What does that mean?
original title: [.] ShellClassInfo] [email protected]%SystemRoot%\system32\shell32.dll,-21787 Remember - this is a public forum so never post private information such as numbers of mail or telephone! "Ideas: why make this message at startup ' [