battery HP pavilion 15-e016tu notes with book

I have the hp Pavilion e016tu 15 notebook, & I bought before 3 weeks. problem is consumption about 5% to 8% battery after stopping power. Once I got close and start the day following consumption of this amount of battery power. Any ideas?

The laptop has always on usb ports where you can charge a cell phone or something to the usb ports even when the computer is turned off. Those go off in the BIOS could save one percent of copuple of day to the next. You will lose some costs over time. 5-8% of the overnight is a bit much.

Tags: Notebooks

Similar Questions

  • my wireless mouse and keyboard do not with windows xp after you install a new battery.

    my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

    Hi nwecker,
     
    -What is the brand and model of your mouse and your keyboard?
     
  • Pavilion 15: Laptop HP Pavilion connected does not support

    Hi all

    I have a "HP Pavilion 15 Notebook PC' with Windows 8.1 and almost two years.  A few months ago, I had my laptop on my lap and it randomly turned off, once again did not higher than approximately 84%.  Every now and then I would plug in to charge and he said "plugged in, not load ' so I solved the problem by turning off the coast, taking the battery, turning on, uninstallation of Microsoft ACPI-compliant stack method, turning off putting, the battery back on, the BMCC ACPI would day and she charged up about 84%.

    Since about a week ago, which has stopped working. I tried to update the ACPI-BMCC, do the above, several times, and nothing works. I noticed the recommendation for the utility of battery HP but 1) who has not worked in the past, when he would not load completely and 2) the computer has a 0% load and will not hold a charge, so the step where it says turn on unplugged, my computer won't turn on.

    After trying to use the utility of battery HP a few things happened. (1) I have to hit the ESC key to access the menu, by pressing on it when the logo appears as it says has no effect. (2) when I tried to run the battery test, it says 2 minutes from the end and 1% complete before freezing the computer upwards and after pressing the power button it instantly disabled.

    I don't know if I need to get a new battery or if I just try something, I didn't get even.

    Thanks for your help.

    -Kadratos

    Hello @Kadratos,

    That information is a strong indication that the battery needs to be replaced, it is not read correctly.

    Using the product ID you provided that I could find the maintenance and care for your laptop computer guide.

    HP Pavilion 15 Notebook PC Maintenance and Service Guide

    On page 47, the battery part number is listed:

    4 cells, 41 WH, 2.8 Ah, Li-ion - 756743-001 battery

    If you have purchased an extended warranty with Notepad, you can call HP Support:

    Contact HP worldwide

    If not, you can buy a battery of the user part of HP or other trusted shopping sites, using the battery part numbers: 756743-001

    HP part Surfer

    Have a great day!

  • HP Pavilion f040nd 17: replacement of battery HP Pavilion Notebook PC

    Hello

    Since a few weeks ago, I noticed that my laptop battery capacity has been significantly lower than in the past. Without recharging, takes laptop, for about 1 hour, while it used be about 3 hours. I was thinking about to buy a new battery in case my current suddenly no longer be used.

    I searched for a couple of batteries for laptop computer on the internet to find that they were all similar to mine not or have different abilities. At the moment I don't know what to buy, I don't plan on replacing my laptop at least a year, and I'm afraid that the battery won't last that long.

    My laptop is a HP Pavilion 17-f040nd and use the battery that came through the sending. Both the battery and the laptop are 2 years and have served almost every day. The battery has a voltage of 14, 8V and a capacity of 2700 card. It would be nice if someone could tell which battery should I buy to replace my current.

    Kind regards

    Carpet.

    From the Manual:

    (18) 4-cell, 41 w/h, H 2. 8 a Li-ion battery 756743-001

    https://www.Amazon.com/battery-HP-Pavilion-17-F000-17-f000na/DP/B0187Y9WTK/ref=sr_1_3?ie=UTF8&QID=1468582526&SR=8-3&keywords=Pavilion+17-F000+battery+genuine

    You can find "compatible" or "knock-off" batteries for a little less but I guess you want to stick with article authentic and $80 is not too bad.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion 500-108es: problem with HP Pavilion 500 - 108es BIOS? password

    Hello

    We have a HP Pavilion 500-108es provided with

    This screen. "Enter the password for start" would be the translation. Guy said he didn t wrote a password in the BIOS and swear by himself, it seems.

    I tried to remove the CMOS battery, change, a clear CMOS, etc... but nothing has worked.

    ¿Any idea?

    Thank you!

    Hello:

    For your desktop PC, you need to move some jumpers to clear the BIOS password.

    Please see the link below... Erase password settings.

    http://support.HP.com/us-en/product/HP-Pavilion-500-100-desktop-PC-series/5395585/model/6559295/document/c03757575/

    Important: The instructions as you see them on the Web page are not quite correct.

    I modified the instructions below...

    To clear the password BIOS follow these steps:
  • Pavilion dv9005us does not illuminate

    My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

    GDH777 wrote:

    Hello and thank you,

    but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

    But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

    I hate to complain, but still Ty

    Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.

  • The battery icon says connected does not support

    When I clicked on the battery icon that he read plugged not supported. I turned off the computer & pulled the battery, then I held the Start button for 10 seconds, put battery back in & read it plugged in charge.  The next day, it was the same probleThe computer is the Pavilion 10. Looks like a domestic framework does not work. Any suggestions would be helpful.

    Original title: battery icon says not connected charginr

    Hi nancypalmiter,

    1 - is your laptop battery charge when turned off?

    2 did you do changes on the computer before the show?

    Sometimes, the problem may be with the laptop. The battery isn't bad, but it could be a loose connection or hardware problem with laptop. It will be the right idea to get the material under test if the battery of the laptop is not getting loaded even if the laptop is turned off.

    You can also try the BIOS update and check if it helps. You can get in touch with the system manufacturer for assistance for the update of the BIOS.

    Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

    Reference link:

    BIOS: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

    Additional information:

    Battery not power Notebook or hold a Charge

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00259897

    Hope this helps and keep us informed if you need help.

  • Updated my iPhone6 to ios10 and now my battery heats up and does not load

    Updated my iPhone6 to ios10 and now my battery heats up and does not load

    I have never experienced this with another iPhone or iOS version

    Of course, it's a problem because I use my phone all day

    What troubleshooting steps have been taken so far?

    Have you completed a reboot, reset or restore such as recommended by Apple?

    Best,

    GDG

  • The battery swelling?-Trackpad is not a click.

    Hello

    5-6 weeks, I noticed that my trackpad was not letting me click on the left side, I can click on the right side and a little to the left, but there is one area where it is impossible to click. After reading a lot of Web sites and discussions, it seemed like the battery was swelling. But a few hours later, the trackpad was back to normal and I could click anywhere. This incident occurred again a few days later and a week later. Finally, about 3 weeks, part of the left of the trackpad would not click, but it stayed like that, and it's always like that now. I do not leave my computer plugged in for long periods of time and on the week take it out for much of the day and only plug it in at night. My battery has crossed 450 cycles and talks a little more than 3 years. The trackpad is usable for me and I use 3/4 of it, but only about 1/2 of it's easy to click. I'm afraid if it's battery swelling, it could worsen and cause a major problem. What should I do? And this battery is a swelling or not?

    Thank you

    Flyer505

    Welcome to ASC, flyer505!

    Allowing it to continue without correction can cause HUGE problems.

    • The trackpad may stop functioning completely requiring replacement
    • The swelling may damage the Unibody case any practice
    • A battery of swelling at some point will flee his guts everywhere inside the computer and can corrode the connections with the goo comes into contact.

    Delays are likely to increase the costs of repair. Don't wait any longer unless you are ready to replace the computer, you have now.

  • HP Pavilion dv6000 will not stay

    HP Pavilion dv6000 does not load

    At the bottom of the document, it had a link to the replacement of the battery.

  • HP Pavilion dv6 Notebook PC: Wireless Device on HP Pavilion Dv6 does not!

    Hello! I'll start with my mobile information system (and please excuse my spelling and language because I am very frustrated at the moment and typing this on a cell phone)

    It's a HP Pavilion dv6 Notebook PC with product number - B3K21PA #ABG. Serial number is 2CE2201C96. I have a Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n according to my device manager. I recently chanhed my ISP and the wireless router, they provided is the Linksys E1200 model.

    Now, on the problem - after the use of an extended internet (Skype call or internet games) my laptop just stops giving me access to the internet. And I say it like that because the internet connection icon shows that I have access to the network and internet connection, but none of my software or browsers are able to connect to the internet. This is the first time, she does. I tried updating the driver (both by checking the driver updates and downloading the drivers manually). I also tried system restore and everything I could think off trying to do a factory reset on the whole thing. And I should mention also - although this problem has happened several times now since I changed ISP (and Yes, I called them on this subject too), this currently seems to be permanent, because it has been hours and it still does not.

    Any advice on what may be the problem or that the methods to try to resolve this would be greatly appreciated. I agree to be only moderately enough when it comes to operating a computer that I am not tech savvy kind, but have been using computers for a while now. For now, my current solution is a fall from my window on the 16th floor and see if that fixes anything. I'm not in my own country and the laptop is old a few years for technical support is hard to find.

    I might be sounding a little passive aggressuve and I apologize for that (I have, however, do not deny these circumstances).

    Thank you for reading through my wall of text of nonsense and condescend to help a poor fellow in his time of need.

    Yours sincerely.

    Hello:

    See if this help... driver installation is much more recent than on taking in charge of your computer laptop and driver page.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_126926_1#tab1

  • HP Pavilion ab160nh-15 V2G47EA: HP Pavilion 15-ab160nh - not all drivers.

    Hi all

    I would like to ask you about the HP drivers.  I read the Forum and back, but I have not found the solution for my problems yet. I bought a HP Pavilion ab106 15 notebook with FreeDOS 2.0

    I installed Windows 7 64-bit operating system and I wanted to install the drivers too. That was the point when I realized that I can't find drivers anywhere. I couldn't use the laptop without these drivers.

    I need all drivers for your laptop: LAN, WLAN, BT, Webcam, 3 USB, Audio, graphic, Touchpad, etc..

    Could you help me please to solve this problem?

    You can find the product here.

    Thanks in advance.

    Best regards

    David

    Hi, David:

    Try the driver directly from Intel.  The 2nd down on the left is for W7 64 bit.

    https://Downloadcenter.Intel.com/download/26242/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

    Unfortunately, I have no idea about other issues you encounter.

  • HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

    My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

    The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

    I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

    Could someone help me please?

    Thank you very much!

    Hi @db69613,

    Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

    I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

    First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

    If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

    However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

    I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

    To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

    Please take care now and have a wonderful week ahead.

  • Trigger line asked could not be booked because it is already in use.

    Hi, I am trying to export the markers PFI0 and PXI_Trig0 on NI5450 (in script view)

    by using the following code

    There are no errors when I set up by using the following code.

    commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.MarkerEvent, "Marker1", "PFI0")
    commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.Marker, "Marker0", "PXI_Trig0")

    When I run the script, I get the following error

    Trigger line asked could not be booked because it is already in use.

    Good: Terminal output event marker
    Target unit: PXI1Slot2

    State code:-89126

    Would appreciate any solution that allows me to configure the two triggers/markers. I use these markers to trigger another card PXI (NI5644R on PXI_Trig0) and an external piece of equipment (using the output of PFI0).

    Thank you.

    Hi Surya,

    Thanks for this posting on the community page. It tells you what this error, it cannot route a trigger to your destination requested because something else has already booked this trigger line. A pottential typo, this is your second order ExportSignal specifies niFgenConstants.Marker and not. MarkerEvent. It is a simple error to solve, but there are many possible sources. Is it possible for you to share the complete code with me? Or, perhaps you could arrange a join.me and I can look at your full installer.

  • Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

    Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

    Hello

    Can't find the official specs of HP. But since the following specifications

    |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

    There

    Ports:

    • 2 x USB 3.0
    • 2 x USB 2.0
    • 1 x HDMI
    • 1 x VGA
    • 1 x jack Headphone-out/microphone-in the drop-down list
    • Multi format card reader

    Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

    Kind regards.

Maybe you are looking for