Battery led does not work by Satellite A100-926

Hello

I noticed a little problem in my notebook.
Infact when the laptop is charging battery led is orange.
So far it's all ok. But when the battery reaches 100% the led turn off, instead of turning into the color blu, as usual.

Is anyone know about this problem?

Thank you.

Hello

Hmm have you check the BIOS if you count all the parameters concerning the battery LED?
Access the BIOS and check this!

However if might be something wrong with the s light and consequently, it would be advisable to contact the ASP in your country for control!

It s your decision and you have to decide whether contact ASP or not.
I mean it doesn t look like a problem serious and the laptop runs fine except for the LED

Tags: Toshiba

Similar Questions

  • Driver Ethernet for Windows XP Home edition does not work on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

    As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

    Hello

    I can't believe that you are not able to install the LAN on this Satellite A100 driver!

    However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

    If you want you can download and install page Intel network driver:

    http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

    You will find the drivers Intel 8256 x Ethernet controllers

    Good bye

  • Recovery disk does not work for Satellite A100-197

    I'm working on an A100-197, which would not boot into normal Windows, but was able to start in safe mode.
    I used MSConfig to disable all startup and other services. Not good.
    I used the system restore. Not good.
    I have scanned for viruses, rootkits, etc. None found. Not good.
    I copied data to another hard drive in SafeMode with network and inserted the recovery DVDs.
    Through unpacking and got message saying to remove DVD - did this and system seems to freeze.
    Click the exit button and it restarts, but Windows froze (the movement stopped moving blobs). Tried safe mode
    but got a message saying that the installation of the system has not finished.
    Tried the recovery again, but this time I left the unpacking screen 100% of the overnight to see if
    He has nothing. There can be no. Click on exit and got the same as above.
    HDD formatted in partition magic and I tried again. Not good.
    Created 5 GB FAT32 partition and DVD files copied to the FAT32 partition. Tried to run the decompression program
    back. He refused to run in DOS mode.
    I think that connects the hard drive on another machine and RecoUnpack.exe a work PC running to
    unzip the files on the laptop HARD drive image, but this is crazy - the recovery disk is supposed to retrieve the
    System. What else can I try?

    GMC

    I would say that you have some serious hardware malfunction. Have you ever tried to check the RAM and the processor?
    In your case, I would try to run the UBCD4Win (www.ubcd4win.com) and superPI allows to see if the RAM is faulty.

    It could also be another component such as the motherboard or something on the motherboard (graphics, sound, some capacitors)

    It s just a suggestion, but you could really give my hint a chance. ;)
    I would also try another HARD drive in this machine, maybe the controller from your old HARD drive disappeared...

    Welcome and appreciate all comments

    Dennis

  • ConfigFree radar Wireless does not work on Satellite A100

    Hello!

    I have A100 WXP SP2. ConfigFree radar wireless has stopped working. He used to work properly, but now whenever I try to use it, I have "wireless communication is disabled. Please activate the wireless communication switch"message. But switch to communication is running, and Fn + F8 is also enabled. I reinstalled ConfigFree and wireless card (I have the card intel) drivers several times, no use.

    No one knows how to fix?

    Thank you!

    If everything is running can use WLAN connection and connect to the nearest network WLAN (Windows can also detect all available wireless networks)?

  • Satellite A200-1UQ - battery charger does not work

    Hello

    I myself 1UQ A200 and my battery charger does not work.
    BTW Im from Türkiye.

    Can find the original, if I can't use universal battery charger?

    Thank you

    On the Toshiba site, you can search for a compatible charger and the reference number:
    http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

    If you have the part number, you can search with Google for this number. If you can t find something, you need to contact an authorized service provider. They can order all the parts of Toshiba.

    I hope I could help a bit.

  • WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

    My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
    How can I fix?

    There is wifi on other computers, but not on this laptop.

    Hello

    You always win 8?
    Microsoft has already published the Win 8.1 System.
    It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

    The 8.1 update win is free and you can download the Microsoft Store update files.
    Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

    I guess that after updating the WLan would work properly.

  • I inserted the wireless network card, but it does not work on Satellite A30

    Hello please, be gentle, lol.

    I have a Satellite A30, no manuals, disks etc. of second hand.
    I had to buy a wireless card and installed it myself (error?).

    The card is an Intel P/N: PA3362U 1MPC.

    My is... have issue I installed it properly (see below), and can someone point me in the right direction for the correct driver?

    (Correct?) installation... .clipped perfectly in the slot in the compartment in the base of the laptop. Two sons rolled? one longer than the other?
    I plugged them as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
    How could I not if it works?

    The LED does not illuminate when the wifi switch is on?
    Is it normal when the driver not installed? FN + F8 has no effect? Again the ths is normal without driver installed?

    Thank you in advance, I'm completely stuck here... Matt

    Hello

    The PA3362U 1MPC seems to be a network wireless Intel PRO/Wireless 2200BG MiniPCI Type 3b card. I think it is s ok and should be compatible.

    The WLan driver should be found here:
    http://APS2.toshiba-tro.de/WLAN/
    Take the Intel PRO/Wireless 2200/2915 driver.

    > I plugged these as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
    I put t know which wire is short or long, but the two sons are different in color.
    Should the white cable goes to the hand and Brown to the auxiliary voltage

    See also this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=45273

    > How could I not if it works?
    Well, you will not be able to connect to the Wlan ;)

    > Is - this normal when the driver is not installed? FN + F8 has no effect? Again the ths is normal without driver installed?
    You should check if the other FN keys work correctly. If other n t FN keys work then Fn + F8 does not work too

    PS: you can activate the WLan also in Device Manager-> properties-> tab advanced Wlan card

    Welcome them

  • Wireless does not work on Satellite L500

    I have a Toshiba Satellite L500 1XZ and my wireless stop working. None before the light is led. BIOS of wireless communication settings is on. In Device Manager it seems to set up correctly with no errors.

    I change Windows 7 Ultimate and professional and the same thing happens. Yesterday, I used the wireless on Win7 Ultimate and now it stopped working.
    Any idea?

    Thank you

    > FN + 8 button does not work, either
    Does that mean exactly?
    Can you choose between ON and OFF option WLAN Card?

    If the WLAN led is off it means that this WLAN adapter is not enabled.

    What model of laptop you have exactly (L500-xxx)?
    What WLAN card is inside?
    Have you installed the latest driver?

  • Scrolling does not work on Satellite Z30-A-1DJ

    Hello

    Summer on the internet trying to find an answer for my problem; How to make scrolling, pinching etc on my touchpad?

    Scrolling never works with this laptop (2 months) and up to now, even moving cursor was not reliable, since sometimes when starting the laptop touchpad was completely dead and has not reacted to what.

    Now there seems to be problems with it since I uninstalled the driver for the touchpad and restarted my computer, but still scroll does not work.

    Troubleshooting for this problem was no good.
    They all lead you to the first research of mouse in the start-> mouse-> advanced properties screen and from here you can adjust the parameters of mouse pad.

    I don't even have this tab on my laptop, while all the others are there (buttons, pointers, pointer, material options).

    How can I adjust the settings of touchpad on Satellite A-z30-1DJ?

    The characteristics mentioned touchpad should be accompanied by software as hardware.
    There are standards of touchpad different as Synaptics, Alps, but also momentum that support different features and different software.

    In the case where this software isn't installed or is not working, the touchpad to scroll as well as other features are not available.
    It could also be that tactile built-in module support no additional features.

    To my knowledge the Satellite A-Z30-1DJ should be equipped with an Alps Electric touchpad and this touch pad is different and does not support the same parameters as MOMENTUM or Synaptic touchpad.

    However, as you said, the additional parameters for touchpad Alps Electric are in
    Control Panel? mouse? last tab (Advanced)

    If you wish, you can try to install the driver for the Synaptics touchpad that has been released for other series of laptops as Portege Z10T-A

    I'm not very well if this Synaptics software would work correctly under the Alps touchpad m power but its definitely worth a try.

  • MicroSD does not work with Satellite click 10 LX0W

    Hi all

    I recently acquired a Satellite phone click on 10 LX0W Toshiba.
    The card says it's compatible with micro SD with UHS - I (maximum size: 128 GB)
    According to the SD Association, the Mode Bus UHS - I is compatible with the classes of speed UHS 1 and 3 (http://www.sdcard.org/consumers/speed/)
    However, the card, I bought (Kingston 64 GB, micro SD XC I, UHS speed class 3) does not work properly in this laptop but it works perfectly in other devices.
    The card is recognized by the Satellite click 10 but reading or writing is extremely slow and often give error messages. I can't even format it using this laptop.
    I think that there is something wrong with the Toshiba laptop, but can you give me your opinion please?

    Thank you!
    Kind regards

    Same thing here

    Toshiba click 10 with 10 windows, micro SD card 64 GB Kingston Class10 (UHS-1) does not work. Card is detected allright - can be seen in the Storage Manager, but cannot format it. If I format in some other device, Toshiba click 10 cannot use he - he can't write will destroy ntfs/exFAT FS on the map. The event viewer is full of SD card related errors.

    Any suggestion here, please?

    Pilot of 2006 (on windows 10) but cannot find anywhere ever.

  • BT does not work on Satellite A660-13D

    Hello

    I have a Toshiba Satellite A660-13D, and since a few days, Bluetooth does not work.
    In device manager it tells me everything is executed, but BT does not open.
    Can someone help me with this?

    Message was edited: assignment has been translated

    Hello

    It is not easy to say what the problem is here. What you need to do is to activate the BT module correctly and software BT must start properly.
    Are you using the original operating system that you got with your laptop satellite? BT Stack (software) is installed on your machine?

  • Drive HARD Win 7 recovery does not work on Satellite L750

    Hello

    I have the Toshiba Satellite L750 with preinstaled win 7.

    I instaled the upgrade to win 8 (from dvd).

    After that I improve the MS site to Win 8.1 System.

    The system does not work properly (DVD is not recognized) so I have to install previuos system.

    First of all, I'm improving my BIOS for the new one - 3.60.

    After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

    So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

    My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
    in the bios the F8 key does not work.

    After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
    I assume that you did not create this disc, right?

    In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

  • 3 USB ports on 4 does not work on Satellite A660-12th

    Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

    My laptop is a:
    Satellite A660-12th
    Reference: PSAW3E-02700GFR

    I almost tried everything:
    -reinstall all drivers
    -Uninstalling the root USB controller and restart the computer
    -Finally to format my laptop and clean reinstall.

    -3 ports still does not work and I do not know how to solve them.

    I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

    Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
    How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

    Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
    The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

  • Switch signals and Wireless does not work on Satellite A660

    I have laptop Satellite A660 17 M AND I am facing a PROBLEM THAT IS THE WIRELESS DO SWITCH NOT RUN AND did not SWITCH THE WIRELESS ADAPTER ON or OFF
    AND ALSO ON THE TOP OF THE KEYBOARD FUNCTION BUTTONS DOES NOT WORK

    AFAIK, the utility Vap and flashcard support are responsible for these functions. You can try to download and install them

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    Note, first you must install the utility of vap and restart the support belt utility and Visual support cards, then

  • Display driver does not work for Satellite L750D

    Hi Admin, how are you?

    laptop: Satellite L750D/050 PSK36A-050011
    Video card:
    Dual AMD Radeon 6480 G + AMD Radeon HD 6470 M 1 GB graphics
    (3059 MB Total: 1.5 GB dedicated + 1523 MB memory shared memory)

    I just brought my laptop yesterday,
    I format and reinstall windows7 ultimate 32 bit, and I download the display driver amd from the toshiba Web site.
    It does not work, and I went to download from Web site of amd that the drive still does not work.

    Can u please help me and tell me how to install it?

    Please, I beg you. Thank you.

    Hello

    What do you exactly because it does not work?
    Have you chosen the right driver?

    Here's your laptop where you can download the driver:
    http://www.MyToshiba.com.au/support/computers/satellite/l750d/psk36a-050011/download?OS=24

    Could you please confirm that you have used the AMD v 8,836 display driver driver?

Maybe you are looking for