Battery Slice T430 problem.

Similar Questions

• T410 + battery Slice - sleep problem

  Dear community,

  I have a Thinkpad T410 with the following specifications:

  Intel Core i7 620 m

  4 GB of RAM

  NVIDIA nv3100m

  Windows 7 Professional x 64

  I have problems if I go to fashion 'sleep'. If I press mode 'sleep', the t410 go to sleep less than 1 second pulse led on the power button, and the sign of the moon on the back of the LCD turns off. Next time if I turn on the T410, Windows asks me if I will start normally or in safe mode. So this means that the battery or the T410 certainly interrupts the current, and they seem to have no power. But it doesn't happen every time. For example, I give the following:

  Main battery: battery 100%: 100%: "sleep" mode works perfectly

  Main battery: battery 100%: 50%: "sleep" mode works perfectly

  Main battery: battery 100%: 0%: "sleep" mode works perfectly

  Main battery: battery Slice 75%: 0%: "sleep" mode works perfectly

  Main battery: between 60 downto 0% battery range: 100%: standby mode does not work.

  I did this for the moment a long time. I can't give a percentage by exactly, when the sleep mode does not work, but if the slice to 0% and the main battery approximately between 60% downto > 0%.

  I updated my BIOS and also the energy Manager. But there is the problem more far.

  Anyone have the same problem and have a solution for this? I think that behave in the system/T410 isn't normal right?

  Thanks in advance for your help. I look forward to your answers...

  Best regards

  Dear community,

  I know that the subject is almost a year, but I have a solution for the problem mentioned above.

  If you install the "Intel AMT 6.2 management engine Firmware" problem is gone.

  I am very pleased to find this solution. Now I can to each battery charge percentage goes into sleep, even with the battery installed slice mode.

  Best regards

• No switching mode battery slice "sleep."

  I have a T520 (4240, BIOS 1.28) with batteries primary and 27 ++ "slice" of 55 ++. With the main battery on 80% charge the battery slice 8% load, I closed the lid and machine went to 'sleep '. I had not used for a few days and when I finally opened the cover, I found the power had been lost and the machine had to be started cold, losing my previous session.

  While a few days, the battery slice fell to 0%, and then the machine lost power. Never, he opted for the main battery, which was still about 80% of the fees. This is the expected behavior? It doesn't seem fair to me.

  Hi astecker,

  Sorry for the late reply. Since your last post, we have several updates. Grateful if you can try to update the list below and see if the problem persists, if the problem persists so that I can get a case goes with genius on this subject.

  BIOS: 1.39 here

  Power Manager: 3.64 here

  Power management: 1.64 here

  Slice battery firmware Update

  If the problem persists, please let me know, so I can connect one case to engineering.

  JMT

• BlackBerry Smartphones Blackberry PRIV battery drain & heating problem

  Hello Blackberry, team

  I bought PRIVATE released last week from classic BB. PRIV has severe heating and battery especially drainage problem while loading and between 100% and 40% of battery (drains 60%) in 1-2 hours.

  Note that I do not use heavy duty applications and it heats up even when kept or wait (especially during loading).

  My Apps are up to date

  Operating system is up to date

  I have restored several times, but still have the same question (even if no other apps are installed).

  Question: Is it a solution to this? BlackBerry is working on it or just forget it and move on to other brands?

  Finally and above all, I'm on Blackberry for the past 12 years... I really hope they take their clients seriously around the world.

  Hey parthz8,

  Sometimes it happened while the load when I got 5.1.1 but now with Android M 6.0 seems to be fixed.

  What I was doing when it was happening, it is to reset the phone with the power button for 10 seconds while it was still connected to the charger. Sometimes a couple of reset is necessary

  Ice

• BlackBerry Smartphones "BOLD" battery draining - overheating problems

  Hi all

  I'm new here I have BlackBerry for almost 2 years (curve 3000) and I was really happy with it (no problems) then I bought "BOLD" Saturday and has exhausted the battery - overheating problems! I downloaded the new software from T-Mobile Croatia site (they have one last but which did not help) after recharging and stay all night, he went flat within 6-7 hours so I went today (Monday) and they swapped the device for me, now I'm waiting to see what will happen. I have 4 questions:

  1 can I download new software version of the device from the BlackBerry site that even I bought in Croatia from T-Mobile and which will have consequences on the device? If yes what are they?

  2. what causes this battery drain - overheating problems and how they can be stopped?

  3. is Facebook app in conflict with "BOLD"? Yes I have it on mine.

  4 are all the other apps in conflict with it, i.e. Windows Live Messenger because I have too much that one on it?

  Thanks in advance!

  1. no consequence... the latest version of the "BOLD" OS device is located here:

  http://www.BlackBerryForums.com/General-9000-series-discussion-bold/194263-OS-9000-bold-4-6-0-477-4-...

  2 could be a number of issues, several. You have 3G enabled on your "BOLD", on the one hand, (manage connections > Mobile Network Options?, and you have a 3 G with Tmobile Croatia network?) I know not flippant, you could ask that. If your device is constantly looking for a 3 G network and not finding what will cause the big battery drain.

  Check your applications running in the background. There are usually four or five applications that will be always running (Messages, Call Logs/phone, BlackBerry Messenger, home screen and the browser; there are others such as BeamBerry and alarms which will run also). Ensure that the browser is NOT on an active Web page (must return the bookmarks page only). Close all other applications that do not need to be running (the camera or a game you were playing or Google Maps).

  3 No.The FB app is developed by RIM.

  4. What do you mean 'in conflict '?

  Read this on your battery and load:

  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• alert! system battery is low problem for dell optiplex GX620 Tower

  alert! system battery is low problem for dell optiplex GX620 Tower, how do I fix or solve this problem, is this will solve by change coin cell? If yes than suggest me about the cell its name will be full description

  The battery is a battery CR2032 DL2032.  In the USA they are in grocery stores in the pharmacy section because the readers of blood sugar using the same battery.

  http://www.Walmart.com/c/KP/CR2032-batteries

  

  

• Portege M900: Battery and load problems

  I hope someone here could have helped me out in my problem. I bought my last Toshiba Portege M900 2010. I always want to plugin the charger my laptop when I am at work.

  It presents a time that when I turned on my laptop, the battery was about to be empty as the remaining 7%. I took my charger and plugged. After 5 seconds it turns off without any warning or so.

  I checked the lights in the laptop, the "light of load" is not on although charger is plugged into the outlet. I tried to use my Toshiba Satellite laptop charger and it worked.

  I tried to disconnect the battery from the laptop Toshiba Portege M900 its place and plug the charger again but there still does not turn on.

  So I took my Toshiba Portege M900 to nearest service center. But surprise when I arrived and on the problem of the technician, the laptop turned on after it was plugged. The technician said, he saw no problem because the laptop was in charge and it works right.

  But when I took it home, whenever I have remove the magazine from the taking of the laptop, it turns off immediately without any warning eventhough that battery is charged to 100%.

  And there were times, even if I remove the battery from the laptop but always plug the charger... the laptop will always be NOT PUT on.

  I tried to check the Toshiba PC Health Monitor, but it seemed that the battery works well. What do you think seems to be the problem? Is it the charger, the battery, or the power supply or the motherboard?

  > Is the charger, the battery, or the power supply or the motherboard

  I put t think its battery problem.
  Why? Because the laptop does not power upward even if the battery is removed but connected to the power adapter.

  Jack _Power? _
  Perhaps. It might be possible to equip jack or connection between the power supply and the card mother isn t ok.

  _Motherboard? _
  It could be a problem with electronic control gear that is part of the motherboard but once more; It's just an idea

  _Charger/AC adapter? _
  Hmm, you said that the adapter has been tested with another laptop and it worked. So maybe it s question no AC adapter.
  But are you sure that other phones have not run to the battery power?
  The adapter has been tested correctly? It is an open question.

  Another idea:
  What version of BIOS you have installed the M900?
  Find an update of the BIOS for the M900 protégé
  + Updated BIOS version 2.40 for Portege M900 and Satellite Pro U500 (for PSU56 *, PSU5C *, PSU5J *, PSU5Q *, PSU86 *, PSU8G * and PSU53 * ONLY) +.
  http://PC.Toshiba-Asia.com/support/drivers/details/30516

  You will find a detail on the correction of a problem:
  + System can not turn on without using the AC adapter / CC after the battery has been detached and attached again. This problem has been fixed. +

  Please check if your Portege M900 is one of the mentioned models and check if a BIOS update is available for your device.

• Satellite M30X-118 battery charging/no problem

  my laptop has this problem. First didn't charge the battery, but I thought it was just a battery problem but after a few days when portable you his, I no cost at all when his cock there is the amber light (charging the battery). Now, I plug in the adapter and no light is on, because it has no power at all (no a/c or battery). When I plug the cable I see a flashing, but after 10 sec. nothing. I really appriciate if someone could help me

  Is this of any interest to you?

  http://www.laptopka.com/2006/04/04/fix-most-common-problems/comment-page-2/#comment-178

  Down near the bottom of the page there is mention of an imminent lawsuit involving the A70, A75, M30X and M35X. This is how very recently.

  There is also this page if you want to spend a few minutes.

  http://www.laptoprepairguy.com/

• Re: Satellite Pro U300: critical battery Vista hibernate problem

  Hello

  I have a Satellite Pro U300 PSU31E and have problems with the critical level of batteries and hibernation since I got it.

  It comes with Vista Business

  Critical battery level is set at 2% - is the the strage thing if I hit Hibernate mode (via the power button or start > Hibernate) it have hibernated ok - even at 2% remaining battery. However if I leave it to do this automatically (via the action of critical battery and critical battery level Windows) he died just in hibernation - looks like it ran out of power. The only way I can operate automatically through Windows is by setting the battery level critical to 8% (he dies still in hibernation on what whether it is less than 8%).

  Normally you would just say ok the critical low level must be higher but one) why when I Hibernate manually less than 8% is working perefectly and b) put 8% loses me a good a few minutes! and (c) especially the computer or the battery do not think they are flat at 8% - then, the problem is that it allows you to restart. When the computer starts less than 8%, he has already missed his firm critical point 8% so then just down and down with no further action of the battery until it dies. My XP laptop would be closed, then the computer would know the battery is flat and do not allow a restart up to the critical load of 3%.

  What is one thing Vista or Toshiba?

  Probably not the battery I have 2 with exactly the same problem

  I have all the latest drivers for the power and Vista SP1 and latest version of the BIOS

  Thank you

  Hi David

  I think it s not a Vista problem or question Satellite U300.

  The point is that the OS Vista needs a lot of resources and more energy than the older Microsoft operating systems.

  Always is it that same laptop with pre-installed Win XP would be a lot more time using the power of the battery as with Vista OS.
  Vista is a monster and he eats all the material resources.

  This means that if you use the Vista operating system, you must set the parameters of critical battery at a higher level to make sure that your laptop (Vista OS) would end Hibernate process correctly.

  I think that the last 2% of the battery power is simply not enough to put the laptop into hibernation mode.

  So don't worry, relax and enjoy your beautiful baby ;)

  Welcome them

• Satellite P300 - 25 c battery + cable entry problem

  Hi guys,.

  I bought this little beast in October 2009 and I have only two small problems.

  a first:

  My battery dies after about 45 minutes, without power.
  This probably means I need a new battery but is it realistic after two years of service?

  a second: where I put my cable for power, it usually does not connect.
  The small pine of gold inside looks like it is loose (I can move freely until the down side to the other while that plugged into the laptop and cable)

  Contact the Dutch helpdesk of Toshiba or is there a better solution for this issue?

  Thank you very much

  Tommie

  > My battery dies after about 45 minutes, without power.
  > It probably means I need a battery new but is - it realistic after two years of service?

  Yes it's realistic. The battery is a one-time item and after some time of use, the performance of the battery begins to decrease.

  > second: where I put my cable for power, it usually does not connect. The small pine of gold inside looks like it is loose (I can move freely until the down side to the other while that plugged into the laptop and cable)

  Laptop DC port may be defective. So a laptop technician should check this out.

• Satellite U 300 - battery and sound problems

  Hi, I was wondering if anyone has had similar problems as me:
  My laptop is only two years, but last year his work only intermittently. I get messages saying that the driver is not installed, until one day he will decide that the driver is installed after all and works very well. Until the next time it stops working. There seems no rhyme or reason for it. I gave up trying to reinstall the driver, because I know that (possibly) the sound will come back without intervention from myself.

  My second problem may be connected - I have problems every now and then close the laptop. I try to put in mode 'sleep', but is not complete the process, and the blue light comes on. When I then open the cover, very often, the screen stays black and I have to turn off the machine and turn it on again the force again.

  Then recently, I noticed a sharp drop in the battery life (less than an hour). He also annoyingly started losing all power and cut until the indicator showed all the usual warnings of low power.

  Anyone know if these problems can be linked, and whether they can be fixed? A new battery will fix it? To be honest, he arrived at a point where I think to buy another laptop do since they are really starting to get frustrating!

  Thank you very much

  Gooday,

  I also own a U300 I bought about 2 years ago now, I had no problem with the sound but didn't have any other problems with my 1-2 months battery life after life - 20-30 min. I just baught a new battery and it is promising, I just did the first load and it lasted long, however the windows said it had 0% remaining, but I pulled out another 30-45 minutes the dough until it went flat. If you look in your event log do you get the message

  ": The embedded controller (EC) has failed in the specified time-out." This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly. »

  It is listed under ACPI in the event log.

  see you soon

  Lee.

• Satellite 1800-412/battery/screen? problem...

  Hello
  Sorry for the English, I will try to explain my prob
  I have a 1800-412 2 years old (out of warranty) and now big problems with the display when I'm working on it:
  Evry time I turn on the laptop, the screen flashes and nothing shows up except when I press the little button at the top right (this one is pulled down when I close the screen). Then the screen lights up for 5 or 10 seconds and new Moul. In fact, I can see the screen, but it seems that there is no brightness... It is very very bland out (?)...
  This problem seems to appear less often when I work only with battery full power, but is still there.
  I updated the bios 2-10 and updated display driver too.
  But nothing changes.
  Question: is this battery problem screen problem, bios issue...
  Thanks for the tips, I don't know what to do, and it is impossible to work now with this computer.
  someone has an idea of what I need to do?

  Thank you

  Hi frakk,.

  I think that there is a problem with the FL inverter connector pins. Take your distributor to service, they can fix.

  Good bye

• Charging battery and power problem problem.

  The problem occurs only once I have start the load the laptop after that I used the battery for either a small or for a long period of time.

  The battery will begin to charge and the laptop runs from the power supply for 5 minutes at a time. After that 5 minutes, the laptop switches the power source primary battery mode, even if the laptop is plugged.

  Another 5 minutes after that, the primary energy source to switch back and the battery will begin charging again. It will constantly continue to do that, even when the laptop is turned off.

  This is asif that is defective, however, is the second adapter I used and the same thing happens again. I tried looking in the power settings as much as possible and can't seem to find anything that can cause this problem.

  Just today, I noticed that the battery light flashes sometimes white when the laptop has its power as the main primary energy source. I don't know if this has anything to do with this problem. I looked through the manual and support documents as possible and impossible to find a solution to this problem.

  If the battery is low, when I start the laptop loading, that means I have to stop using my laptop, that this process will continue to arrive and finally the battery will stop and the laptop will be extended even if the plug is connected.

  Help, please!

  Hello

  A friend of mine had a similar problem but on non-Toshiba laptop. The reasons because it is a dysfunction of the taken power there was a loose contact between the socket and the motherboard

  The technician said that the motherboard needs to be replaced because it would be too difficult to solder this Jack once again

  If the mobo was replaced, but it was a costly affair

  Don't know if this could be the case even, but this looks a bit like the issue of power supply...

• Internal battery / Date/time problem

  My NEX-6 will only keep the date/time information after I put it. He was dead when I got it, but after the normal battery charging to full and using the camera, whenever it is turned off, it forgets the time. I did some research online, which said it may take a while to recharge the internal battery, but I tried to charge for 24 hours straight, and using the camera frequently (as described in the manual) and doesn't seem to solve the problem.

  Once, after leaving unused for a few days, I noticed that he miraculously started saving the date correctly, even when it is off. This lasted about a week, but now he has lost the ability to keep the time again, and with the charge Jack did not set.

  Any thoughts? Apart from sending to Sony to repair?

  I tried the factory reset but that did not work. As I don't have a battery (and don't want to buy a second, in which case it is not the problem), looks like I'll need to come back for the service.

• Battery Lenovo Z510 problem

  Greetings! I have a Lenovo Z510 8 GB Ram, Core i7, 1 TB hdd, I bought less than a year ago. Off late I've known major battery issues. He started with the laptop stopping randomly without warning, even if there is a life on the left, for example. PCT of 90 or more. This worsened when the laptop did not start at all, until I plugged in the charger. The only way I can now exploit the laptop is connecting to the charger, but again, the battery remains at 0 of the pct, does not load. The battery light continues to flash red, also, I used a BatteryInfoView application to analyze it, and it still says battery reached 83 percent of its original capacity, however, I get a message every time at startup saying the battery is low and needs to be replaced. What can I do about it? Thank you.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you