BCD of Windows file error

Similar Questions

• BCD of Windows 8 error code: 0xc000014c

  I installed Windows 8 on a dell xps15.  Everything worked well with machine stop and restart several times.

  I put the computer in standby mode, then restarted when I get the boot bcd file error code: 0xc000014c.

  As I don't have drive recovery for window8 as downloaded online.

  I have the drive recovery for windows 7.

  Is here, download restart windows 8 and fix this?

  Hey guys, if you have Windows 7, put it in and go to the recovery, it will fix it for you. What I've done. Rather than wait 2 weeks for the stupid CD.

• Error code: 0xc0000034 missing file /BCD in Windows 8

  * Original title: help! Error code: file missing /BCD 0xc0000034 Windows 8!

  Hello

  I have a Zoo-storm and I seem to have a lack file start.

  The error code is 0xc0000034 and the missing file is /BCD.

  I do not know the use of this file, but it seems important to me.

  I called the ZooStorm company and they said I should have a drive, but I do not have this disc.

  I really don't like if I have to completely wipe the computer but I need this problem soon.

  Help, please

  Tyler

  The link you provided above comes up with a message "page cannot be found".

  I have now solved the problem by using the BCDBoot command, but it took a week of research and a lot of trail and error, while I have it might have solved the first day if the BCDBoot instructions above had been better.

  Here are the BCDBoot instructions above:

  1. press SHIFT + F10 when you are in the screen install Windows, elevated to the starting command prompt will now open.
  2. type DISKPART command
  3. Enter the command LIST VOLUME, note volume don't...
  4. Enter the command SELECT VOLUME 'no' (eg1, 2, 3) mine was 3
  5. Enter the command ASSIGN LETTER = Z and OUTPUT
  6 enter the BCDBoot c:\Windows /s f: UEFI z: command
  7. close and restart.

  Here are my suggestions for improvement:

  Point 3. above: the statement: "Note volume no....". "is useless, because it gives no indication of what are the criteria to use. I thought initially that files would be copied from the dvd of recovery on the c drive, so I noted the volume for drive c. In fact, the files are copied from the c drive, so the volume no note is one containing the BCD files used at startup, which is different. It is not obvious to me how to choose the correct volume. I guessed that it was volume 2 on my Dell laptop (labeled something like ESP or EPS) and which proved correct. Otherwise, it's trial and error again.

  Point 5. above: it should be two lines, as there are has two separate orders to enter.

  Point 6. above: I think that the two points between f and UEFI should not be there.

  I hope that these suggestions are useful to other people, assuming they notice that there is a Page 2.

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• Cannot install KB973688: error: Windows Setup: error opening installation log file

  Original title: cannot install KB973688

  After you download http://www.microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en#Instructions

  I run the file and get the error message from Windows install: error opening installation log file. Verify that the specified log file location exists and is writable

  Hello

  Try this:

  Step 1: Run the file as administrator.

  a. right click on the downloaded installation file.

  b. Select run as administrator.

  c. then follow the installation wizard.

  Step 2: If it does not help, reset the windows updates and then try to install the update.

  How to reset the Windows Update components: http://support.Microsoft.com/kb/971058  

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• KB954430 continues to appear in Windows Update, Error Message for lack of Log File during manual re - install

  I followed several other discussions about the inability to install this update, but I succumbed.

  My problem started when I did a system restore to solve a problem with a newly installed program.

  Under update history, windows update is of the opinion that this update has been successfully installed several times.

  The 954430.log log file is not present in my windows directory.

  The update is not present in the list of installed updates.

  I moved msxml4.dll and msxml4r.dll in the system32 directory.  When I try to reinstall KB954430 manually, the following error message is received: "error opening installation log file.  Verify that the specified log file location exists and is writable. »

  Thanks in advance for your help.

  Thanks for the attempt to help Umesh P.  Went before your answer.
  Something I've done has solved the problem, if I'm not 100% of the exact solution.

  So, I found some of these random number files that contains kb954430 log files in the home directory of my swap file partition.  I deleted these.

  I tried to reinstall manually, it still gave me the same "log file" error as described in my post above.  Then, I tried to install it via the automatic update service.  Then, he stated that the update was not necessary.  The update kept bugging me on this subject, but finally, after a reboot or two, I noticed he had stopped to ask.
  My computer seems to work now, as far as I know, although I do not have the patch installed in my list of updates, and the msxml dll never came back.  Is there a chance that the patch was never installed and he abandoned?

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A windows file protection error:

  A windows file protection error: "files which are required for windows to run properly have been replaced by unrecognized versions." To maintain stability, windows must restore the original versions of these files. Insert the CD 2 of Windows XP Professional now. "XP is preinstalled on the system, when I bought. I guess that "backup" files are stored on the hard drive a record 386.  Error message gives only the ability to insert the disc. Unable to navigate to say it looks like somewhere else.  Is there an 800 number to call the command?

  It is possible that the files you have are good and the problem could be that the signatures authenticate not.  This could be caused by your root certificates being obsolete.  It wouldn't hurt to go to the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  and go to the subsection titled "Root Update Package (intended for Windows XP only)".  Here, there is a link that will allow you to download and run an update of your root certificates.

  HTH,
  JW

• Error message - Windows files have been replaced by unrecognized to start Windows XP, files.

  Original title: unrecognized Windows files at startup.

  I recently installed XP Service Pack 3, which included the so-called "Power Shell". Since when I then boot up, I get a message box that Windows files have been replaced by unknown files. I gives me the opportunity to continue with these files not recognized or not. If I choose "Yes" to continue, the message warns me that continue with those unrecognized files could make Windows unstable. If I choose 'No', I received instruction to insert the correct CD and install the files. Problem is the only drive I have is the Operating System CD that came with my Dell Inspiron 530 s. The message then told me that it's not the correct CD.
  I thought about uninstalling Power Shell, but I get a message that it could lead to things like updates of IE and do not work. What should I do?

  The messge comes up saying that it is not the correct CD as Service Pack of the CD must match with the Service Pack installed on your computer. However, there was a similar question was asked here - http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/in-xp-getting-error-files-that-are-required-for/f7433993-e5c2-454c-8f23-ddd7fdb3630b

  Please refer to it. The solution may be the same as far as I KNOW.

  It can be useful :)

• Windows - (various) corrupted file errors. Unable to run chkdsk. Windows XP Home Edition

  Hello

  I hope someone can help me with these error messages; which seem to vary what I do on my computer.  First error message is Windows - file corrupted the file or the directory c:\Program files Symantec Shared Shared\EENGINE\EPERSIST common. DAT is damaged and unreadable. Please run the chkdsk utility. The second error Google Update.exe - corrupted file as the c:WINDOWS\Temp\GUR2.tmp file or directory is corrupted and unreadable. Please run the chkdsk utility.  Unable to run chkdsk by using my computer or command prompt.  System message - cannot open volume for direct access or CHKDSK cannot continue in read-only mode.  Running fsutil dirty query c: Volume-c: is dirty message.  I also have experience from time to time a process loop at startup where the computer keeps turning off and then restarting.  Thank you

  Hello

  ·        Since when are you facing this problem?

  Method 1:

  You can run the check disk by booting in safe mode and check if that helps. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

  Once you start mode without fail, try and run the disk check and check errors.

  Method 2:

  If you are not able to run the check disk in safe mode, you will need to boot into the recovery console, and then run check say. To do this, you need the Windows XP installation disc. The enforcement procedure checks the disk in the recovery console.

  (a) Insert the Windows XP CD-ROM into the CD-ROM drive and restart the computer.
  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  (b) when the "Welcome to Setup" screen appears, press R to start the Console history.
  Note: If you have a dual-boot or multiboot, select the installation that you want to access from Console history.

  (c) when you are prompted to do so, type theAdministrator password. If the administrator password is blank, just C:.

  (d) to historic Console command prompt, type the following then C::

  Chkdsk /r

  (e) allow to run INTACT until the completion

  (f) report any error

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  The problem is, Chkdsk will not fix this, and I can't access the file. This opens up a world of problems when I need to fix this error, so I can upgrade to Windows 7. Help, please!

  I just ran the scan again. He said of the errors found, but could not be repaired.

  This problem actually has nothing to do with internet explorer. It's the cookies folder that is corrupt in the Windows folder in roaming. The error file is in conjunction with the programs, that I try to run (AIM, Skype, so forth). Trying to enter the folder it says it's corrupt. I don't know what is the root of the problems or how to solve this problem, but these measures have not helped so far. Regarding the repair, I will try that next.

  http://Tinypic.com/view.php?pic=14mw4ly&s=4

  Here is a picture. This is the error of the lower right

  It's what the tool SFC to see system files corrupted and try to repair the system files.
  SFC could not fix it.

  Looks like you will need to do this:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Read the info on the link above.

  Good luck with it.

  Let us know how you go with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Error code 0 x 80004004 file dll Windows 7 error

  * Original title: Dll file error

  I have a compaq presario 2000v with windows 7. For three weeks he would not even the option of much less put Bios in place. Maybe give too much info, but here goes. Tried to do to reinstall win 7 x 32 bit disc no good. Don't know why but connected to the xbox 360 Wireless network adapter and it finally started and began to read the disc. Got straight to the point of failure weeks. Do not know with certainty if the adapter has helped who cares? Anyway had a read error so I went to windows defender after removing the adapter AND disc to analyze the error found in almost 90% of the said analysis "program cannot verify updates definition error 0 x 80004004.» Abandoned operation. '' FYI: definition antispy 1.217.2394.0. Help, please... What should I do now

  Maybe give too much info, but here goes.

  In fact, not enough information.

  What is your subject ("Dll file error") relate?  Please provide the full text of the message.

  What sort of "win 7 x 32 bit disc" did you use?  Retail purchased the Windows 7 installation DVD, "restore" from the manufacturer, a sort of "repair" disc disc?

  What was the "point of failure months ago"?

  "Got a read error" means that at some point, do what was your ' win 7 x 32 bit disc ", the computer reported an error of the disc?  The procedure launched?  Is Windows 7 works when even (seems so if you were able to start Windows Defender)?

  "Went to windows defender after removing the adapter AND disc analysis" means that you swept malware using Windows Defender your hard drives?  If so, you have reason to believe that your system is infected?  Please provide details.

  If you have removed your wireless network adapter, how the computer is connected to the Internet?  You will reach the common Web sites, for example, Google?

  Any other software antivirus or antimalware software is installed?  If Yes, what?

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Backup Windows 7 error code 0 x 81000037 ' snapshots of files cannot be read. "

  Hello world
  Today, I tried to make my first backup of the computer.
  I tried 4 times now, but still got the same error, something about shots of files that cannot be read.
  Error code = 0 x 81000037
  I really tried many things to solve this problem, because I do not know how to start.
  Any help from someone who knows what to do is certenly welcome.

  Thank you in advance, Michael

  original title: backup Windows 7 error code 0 x 81000037

  Hello

  I have the same problem two days ago. However, I had installed Microsoft Security Essentials (MSE) at the beginning when I bought my computer Dell (dec 2010) (I have not used McAfee). Two days ago, I ran backup on my disk network as usual and got the error message, but I noticed that the MSE has detected a threat to java. I decided to uninstall all downloads in two days ago, and the most important was to run a COMPLETE SCAN of MSE. He caught 3 java threats and withdrawn. After that, I ran backup again and it worked perfectly. I hope that this experience will help someone when I post my response.

  My computer is a desktop i-5, Dell, Windows 7 Ultimate, my network drive is connected to Linksys E3000 of Seagate.

  Note 1: I regularly MSE update later.

  Note 2: I went through the so-called "reparse points" and without success.

  Note 3: Download those that I uninstalled everything came from Apple (please don't hurt me I don't like Apple.) I just wanted to test in all circumstances.)

  Exactly the same problem and same solution: run Full scan in MSE (which found a few 'malware' which is associated javea), then uninstall java worked well!

• Install WIndows 7 on XP extension files error

  Hi I have a Dell Inspiron 6400 and im trying to install Win 7 on a corrupt XP. XP gives me this message when I boot it \system32\hal.dll. If I want to install Windows 7 on it, but when I do, it gives me an error message on the extension of the files that says. Windows cannot install required files error code 0 x 80070001. Ugh so im just struggling with this computer and I really don't want to reinstall xp. Thank you for your help.

  Hello

  There are no Windows 7 drivers or support available for your DELL Dell Inspiron 6400.

  Select OS at this link of Dell:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-6400x

  Reinstall XP.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here are the steps that you would have needed to follow before you try to install Windows 7 on any machine.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.