BD-300 Motion detection camera plugs

Similar Questions

• Not able to download Motion Detection on the server of one of my Linksys WVC 2300 camera

  I have two 2300 Wireless that are configured by the same video monitor cameras and I activated triggers motion detection on both devices, but only the camera downloads of video surveillance activities based on motion detection (I can see the video in the surveillance system and I can access the cameras and I can also record video) but I cannot get the camera to download automatically activated detection video movement.

  Are both unable to download cameras activated video motion detection?... Please explain in detail...

• My camera WVC210 lost its sensitivity of motion detection

  Detection of movement with email alert worked for several months, but after that I installed a second camera that it stops working.

  I can trigger an alarm that moving the cameras, but the activity in front of the camera at a certain distance, will not be triggered movement alert.

  The position of the threshold "gliders" for sensitivity do not seem effect of sensitivity, using the box 2 and 3.

  Same problem with both cameras.

  Other control settings influence the sensitivity of motion detection?

  I watched the Red motion detection bar flashing, without any movement alert logged camera system.

  My video setting:

  MPEG-4

  Resolution: 640 × 480

  Image quality: very high

  Frame rate: 30

  MJPEG

  Resolution: 640 × 480

  Image quality: very high

  Frame rate: 30

  Does anyone have a solution for this problem?

  A camera factory reset solved the problem, something is wrong with the ActiveX control sensitivity setting.

  The switch for the sensitivity setting can be moved, but it doesn't look like the sensitivity has been locked to the lowest setting.

  My second attempt to factory reset solved the problem.

• Motion detection interval

  WVC80N.  I set the delay from the time between motion detection interval to 0.  Tests, it took usually more than

  5 or 6 minutes before the camera detects again.  I put it to 1 minute and it would detect after 1 minute

  interval.  How can I do this '0' time work?  I was a 'silent' suspended with Cisco now for about 20 minutes.

  Have you tried to configure different sets of interval? controls whether that works or not. If his work and only the time interval '0' does not work, then I think you can try to upgrade the firmware of your camera. Download the firmware on the linksys site and update on your camera.

• WVC54GCA motion detection

  Im trying to install unsuccessful motion detection.

  I activated motion detection on the camera itself, typed in the ftp and e-mail 192.168.1.1 server settings and some dummy use/pwd.

  Attachment video format MPEG-4 type (this is the same that I place in the picture settings)

  Motion activated on the monitoring software detection.

  Still no motion detection is triggered on the software side.

  I figured out, motion detection are actually has been garbage.

  I expected to be fullscreen by default, but it seems that the developers of linksys have different diverge on the settings of the default logic

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• When I try to use my webcam in my hp laptop it reads this "no webcam not detected, try plugging your webcam" I can't connect the webcam if it is installed. What should I do?

  It is the cyberlink youcam is not working. He said "no webcam detected, try plugging your webcam. If you use a camera to make sure that its on. "Also my microphone does not work.

  Hi Samson,.

  1. What is the model of the webcam number?
  2. did you make any changes to the computer before the show took place?

  Method 1
  I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest to update the drivers for the webcam and the microphone provided free of charge by manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information:
  See to believe
  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

• VAIO Motion Eye Camera stop working

  Laptop: VGN-SR190E
  Problem: USB Motion Eye Camera stop working
  OS: Vista Edition Home Premium

  The Sony Visual Communication Camera died in this laptop. I want to talk about the "Motion Eye" webcam above the screen.

  In the Arcsoft window, frame (window of the camera) went black, screen resolution went to 176 x 144 (QCIF), whatever that means.
  In addition, no image using Windows Live Messenger.

  Worked very well (image capture), then quit. Removed and reinstalled the drivers. No help. In the properties of the device, he says: "this device works correctly. Well maybe, but no picture.

  What else can I do to fix this?

  I can't stand Vista another day. I ordered Windows 7. I hope that its an improvement. Could install Windows 7 remedy? I guess I'll find out.

  Any ideas would be appreciated.

  Thank you
  Phil

  Update: not working yet.

  Error message in Arcsoft WebCam Companion:
  'Webcam not found or does not work properly. Please click the Connect button and try again.

  Previous post:
  No help from this Forum, but I got the Motion Eye Cam working again. He would sometimes work for a minute or two and then quit. I thought it would be connected USB so I downloaded the registry USB patch (and a whole bunch of other updates and more) and installed it. After the patch USB Webcam has started working again. I don't know if it was the fix, but its working now. The Vaio "Updater" program did not work (it should be updated as well) so I had no idea there were so much software upgrades available for this laptop. I highly suggest that you check the Sony Web site for downloads (if you did not) available for your computer. Good luck.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Implemented the WVC54GCA so that it sends an email to my account gmail for motion detection.

  Hello... I'm trying to configure the WVC54GCA so that motion detection sends an email to my gmail account. I have configured the smtp and port, but I get a failure when I send a test email.

  If someone managed to get this working?

  My gmail is configured for the transfer of pop.

  It is my understanding that Gmail requires a secure and encrypted (SSL) connection.  However, since the current WVC54GCA doesn't support SSL, you won't be able to connect to your Gmail account.

• WVC210 - how to manage control motion detection?

  Hallo,

  I got a WVC 210 this weekend and after some learning, I am happy with the results,

  I use the built in Web server, is a firmware update, everything is going well so far.

  My primary use is the detection of movement. Works very well. But:

  -How can I enable / disable motion detection? Y at - there no flag that indicates the status of the detector? Once I turn it on with the push button, I can't stop it more.

  Thanks for the tips

  Manfred

  The new version of the firmware 1.1.0 fixes this and a few other problems.

  even the new admin manual gives a lot of additional information

  THX!

• Motion Eye camera on Vaio NS 25

  I use a laptop Sony Vaio NS25.

  Suddenly, my motion eye camera turns off while I use it in Skype video calls.
  Now, I can find no trace of it on my laptop. and also cannot find the driver on the internet...!

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to update the drivers of the device and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See the link for support from Sony:

  http://www.Sony.co.in/support/product/VGN-NS25G

• sensitivity of motion detection

  I use IE 8 to implement on my WVC54GCA motion detection. Everything seems to work including the email test.  However, I get mail with no apparent movement.  I tried to set the sensitivity of motion.  I get a screen with a small icon in the upper left corner and an Active X asks for a download.  When I chose to allow it, I get a

  "windows has blocked this software because it cannot verify the Publisher".

  Name LinksysAlertCFG.cab

  Publisher unknown Publisher

  At the bottom of this secondary window I have

  Trusted sites | Disable protected mode

  So I can not load the plugin of sensitivity or what ever he wants.

  Anyone has the answer to this problem.  This looks similar to the OCX problem when I started this journey

  Joe

  Thanks for the comments.  I am running VISTA.  I think I solved in a different way.  I went to: tools-internet options-security-and moved the security level slider all down in "security for this area.  He then installed the software unknown Publisher and I now work sensitivity sliders.  I moved the security level slider to where it was after installing the software and things seem fine.  Everything seems to work, and I'm getting the movement detection alerts by e-mail.  I get them when there is no apparent movement.  I also get email alerts when there is movement.  I get 3 or 4 no alert of movement every few hours.  I'll play with the sliders of sensitivity to see if that helps.

• motion eye camera / webcam does not work. "" Installation when trying to install the drivers, it says "failed".

  Original title:

  motion eye camera / webcam does not work.

  I have not capture camera utility installed on my laptop and when I download site sony vaio, it says the installation failed.

  model is sony vaio VGN-CR19VN

  Hello

  You encounter an error message and the error code during the installation of the driver?
   
  Uninstall the drivers of webcam completely from the laptop and reinstall in the clean boot state.

  Link to download the drivers:

  http://www.Sony.co.UK/support/en/product/VGN-CR19VN_B/downloads/SOACCU-01363010-UN_3265 

   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7, of the above, provide the KB article.

  I hope this helps!

• Sony motion eye cam on my sony vaio vgn-fe48g has stopped working after installing win7

  Please could someone help me to set up the Board Sony motion eye cam and FN keys that don't work after upgrading from Vista to Win7, Sony are no help at all.

  Device Manager can't even see the cam. I tried to install it manually and the nearest me am added the cam, I was able to start.

  Maybe you are missing the drivers. Are there drivers available for this W7?

  You should check with Sony for your specific model and area/region Web site to see if they provide any W7 drivers at all. If Yes, have you installed them for the web cam?

  EXAMPLE - this site is for the India, they have a few drivers for Vista HP 32 bit, but none that seems for W7 HP 32-bit. - http://www.sony.co.in/support/product/vgn-fe48g

  This is a missing driver for W7 then issue you might try to install drivers vista in compatibility mode, but this is not guaranteed and can cause other problems. Back up your data first to be safe. See http://www.sevenforums.com/tutorials/98073-drivers-install-vista-drivers-windows-7-a.html and you need the correct version of the pilot 32 or 64 bits depending on the case.