BDP-S570 is a hum when outside noise

You wonder why this happens - any ideas? Of course I do not notice it when he plays, but when it is off, I certainly hear a sound of buzzing or humming coming from him.

Jerome:
Rather than fix it, it would be cheaper to buy a new device!

Tags: Sony Products

Similar Questions

  • Question: BDP-S570 or BX57 internet multi-channel flow?

    Hi all, I noticed recently that when I listen to the audio or video content on the network as my BDP-S570 diffuse now as a multichannel surround sound instead of the 2 stereo channels.
    I don't know if this is caused by the latest firmware I installed or changed content providers (or the Sony Server site) in a recent past a few days to send their audio in 5.1 multichannel, now. Or finally if my BDP-S570 went buggy and it's stuck in the PCM multi-channel streaming mode.
    It broadcasts my network all music and video internet connections in multichannel sound, even if I put the BDP-S570 "Downmix" mode setting of stereo 2 channels. I swear before I made this latest firmware update, I always had that 2-channel stereo audio from the internet network connections.
    So I need to know and ask if someone else becomes sound mode of 5.1 channels of their Internet stream?

    Update: too bad people, I found my answer. The cause of constantly multichannel PCM streaming of all my network connections was because I had the BDP-S570 DTS parameter defined on ' Neo: 6 Music ' instead of 'Off' in the settings menu. I set this to "off" and all the music from the internet is now back to regular 2-channel flows. for info. case solved.

    I'm glad that you managed to fix the problem yourself. If you have additional questions, please let us know and we will be happy to help you.

  • BDP-S570 not out of HD audio formats

    I have audio output with my BDP-S570 problems. BluRay connected to the Denon AVR-1911, through cable high speed HDMI. Denon then connected to Bravia KDL-55HX800 through same cables. 3D video works fine but I'm not getting any outputs audio TrueHD or DTS HD and not even get regular Dolby incidentally. Output on just says Denon Multi Ch. I have a PS3 connected to the Denon even with the same cables and output HD audio very well. I realize that I can just use the PS3 for the same use but still need to understand this problem. I have read a lot into that and have fooled with several settings, but nothing seems to work. Am I missing something simple? Any help is greatly appreciated.

    Figured it out. Just in case anyone has the same problem, you have to set Off BD Audio Mix. (Mix = is the default.) When the mixture is turned on, the player decodes and output multichannel PCM. Now I get the DTS HD and the sound is incredible.

  • BDP-S570 not stream 5.1

    I am unable to stream digital Dolby 5.1 on NetFlix or Amazon.  I re - configure the audio settings and the audio still come as a Pro Logic.  DVD and BluRay discs work very well (DD or DTS) and Pandora plays music as PCM 44.1.

    NetFlix thinks I must throw my BDP-S570 and buy a new one.

    If this can be true?

    Apparently, the Dolby Digital 5.1 is not available when you play movies netflix on this unit. For amazon, you may have to contact them to see if they allow the DD 5.1 surround sound on the Blu - ray player.

    If my post answered your question, please mark it as "accept as a Solution.

  • BDP-S570 and SACD

    Hi, I'm new on this forum, but long-time Sony fan and supporter. I recently bought a new Sony BDP-S570 BD player to go with my old Philips 32 '' LCD HDTV, the new Sony KDL-46HX800 3D TV and the STR-DA4600ES receiver. I have also several audio SACD discs I wanted to play with this configuration.
    Here's the problem I have:
    I currently have my receiver output HDMI connected to my HDMI TV Philips entry. I have my BDP-S570 connected to the Sony STR-DA4600ES HDMI4 entered. I put the BDP-S570 to output SACD PCM since this receiver that I discovered after I bought it does not support the SACD DSD decoding. Anyway, in PCM mode when I try to play any disc SACD, I see video playback on the TV screen, but there is no audio output. If I put the drive to play only tracks CD (as opposed to the SACD titles) of the disc, then it plays audio in stereo via the PCM mode very well.
    I narrowed down it to her get to play SACD by disconnecting the HDMI TV to receiver connection. If I remove the connection HDMI to the TV, the BDP-S570 SACD multichannel audio stream to the receiver. If I turn on the TV the audio stream disappears again. If I connect the player to a compatible old receiver from Onkyo NR-905 HDMI 1. 3A, she plays SACD audio fine even with connected HDMI TV. So it seems to be a bug in signaling of handshake in my Sony (receiver and BD player) components.
    Sony support, please have your engineers check this aspect of the game of the SACD through your own line of Sony STR-DA4600ES of receivers with an old connected HDMI TV. It simply doesn't get it!
    Sorry for the long-winded post but no other way to describe the details of my configuration to explain it all. Is there a fix in the works for more reliable SACD playback on this player BD BDP-S570 3D? Oh, BTW, I installed the latest firmware update from 13/02/2011 or there abouts. Receiver was last updated available also new out of the box. Please tell me Sony is concerned and is looking to fix this incompatibility in the next version of the firmware! Thank you!

    I just update my situation with this problem of reading SACD I posted. I see nobody else was interested, but I'll post my resolution and conclusions.

    I got my BDP-S570 to play multi-channel SACD through my receiver STR-DA4600ES now by removing a HDMI switch which is connected between a video output HDMI to my receiver and my TV HDMI input jacks. It's the HDMI switch which was somehow not the right signals to the system causing the BD drive to not stream of SACD PCM signals to the receiver. As soon as I removed this switch HDMI from the signal path, it al started to work and read its SACD via the receiver.

    Also, I just noticed that the BDP-S570 is streaming music network in multichannel format now on Pandora music! I never saw blue light multichannel light upward when streaming music on the internet before. I don't know if it is also a symptom of the switch HDMI sending bad communications signals to the player OR if there is a change in the last update of the firmware that I installed on my BDP-S570. It's streaming multi-channel music on Pandora as I type this post!

    Update: I think the BD drive his downmix PCM multi-channel had put instead if 2-channel PCM. If this can explain why I see multichannel streams now too and has not seen him before. HDMI switch issue was also this masking of screening until previously I suspect. Now with HDMI switch out of the picture, it appears as a multi-channel as it supposed to.

    Update2: Well I just tried to change the setting to "DownMix" multichannel stereo PCM BD drive. Then I turned off the BD drive and turned back on to ensure that it restores its settings. I pulled to the top of the current internet music and video broadcasts and guess what? The Sony receiver is always get a stream PCM multi-channel (surround sound)! So it isn't the "DownMix" setting, which is the only cause. Apparently after I loaded the last firmware for this player, it plays now all this internet stream (music and video sites shows) in Multchannel surround sound mode.

    Update: too bad people, I found my answer. The cause of constantly multichannel PCM streaming of all my network connections was because I had the BDP-S570 DTS parameter defined on ' Neo: 6 Music ' instead of 'Off' in the settings menu. I set this to "off" and all the music from the internet is now back to regular 2-channel flows. for info. case solved.

  • Sound problems - the echo of sounds inside my headphone/microphone headset and a loud hum when I unplug my headphones

    I'm having problems with the sounds of the echo inside my headphone/microphone headset and a loud hum when I unplug my headphones it's really embarrassing and I think it could me my microphone internal, but I'm not sure

    The sound is probably your comments because of the gain being turned upward to your audio recording device by default.  Try the same path I mentioned above and see if you can turn it off.

  • Qosmio G30 hums when it is connected to a sound system

    I use my laptop Qosmio G30-201 with my djing system. When I connect it to my mixer, I get a strong buzzing sound coming through the speakers. If I disconnect the charger it stops buzzing. Can I do to stop this noise I need to charge my cell phone while I'm djing on it?

    Hello

    I studied in this forum and found two discussions and debates on similar problems.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22763&MessageID=83719

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22626

    The point is that your Qosmio and djing system have different potentials to ground and the induction of the voltage in a loop of mass. Maybe you can try to connect the laptop to the source without cause.

    Or you try the solution posted by user Thom20

    Good luck buddy

  • BDP-s570 used to connect-

    Up to, say, * Friday * my player S570 two week, connected properly. All of a sudden, it stopped. Even when I walk through all the steps, connect to my secured network and try to reconnect, is just not. WTH? I don't understand! Has anyone else could fix this problem?


  • Why do I have a loud hum when with audio recorded when I read a file saved with Microsoft LifeCam with the latest version of Microsoft Essentials?

    Why do I have a loud hum as well as audio recorded when I play a file saved using Microsoft LifeCam with the latest version of Microsoft Essentials?

    HUMS are usually ground fault loops.

    If it is a test of laptop with and without the power connected (using battery instead)

    The mic can also have a cut wire, etc.

  • BDP-S570 has problems with Amazon Instant Video

    Hi, I have a Blu - Ray of S570 player.  I have cable internet to ~ 30 MB/s download speed and it is the only device on the network.  For the last month, I had problems with streaming movies.  I rented 2 movies from Amazon Instant Video and would freeze and require buffering several times to the places where UN watchable videos.  Another time I tried to watch a video of "TMZ" and he would not play and kept out me.

    I am able to watch a video on my computer without any problem and one I run a speed test on my network when the buffering occurs and it says 30 MB/Sec.

    Any suggestions?

    Just FYI - cat'd with Amazon.  They said to de-register with Amazon and re - register again...  She was very confident, that might solve my problem so she must know something... but I do not know for sure until I have try again tonight...

  • BDP-S570 - does not connect to internet via wifi

    I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

    Network problems can certainly be difficult to diagnose.
    Here are some useful steps to check where your problem is.

    Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
    If you have an address 169 it is a fake connect.

    What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

    the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

    If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
    If you already use a stand alone, try to temporarily disable your security and test it without warranty.

    is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

    Best regards
    Kimberly

  • iTunes player responding to outside noise

    I have problems with iTunes Player (and Sonos Player too for that matter) on my iPhone 6 and MacBook Pro.

    I live in NYC and it is impossible to avoid the noise of the city. But I find that high pitch screams and the sound of high tone sustained as brakes squeaking or beeps backup will cause iTunes suddenly start or stop playback. Or to skip to the next song. How to disable this behavior?

    Thank you.

    Please open the sound preferences window and select the input tab move the slider in the volume all the way to the left. Audio input will be deleted. Any change?

  • BDP-S570 and airport extreme

    Hello! Just hooked up my new player and can't join my wi - fi network. I have an Apple Airport Extreme (1st edition, 802. 11 g). The blu - ray player sees the end network, good signal strength, but when I put my password it says "the number of characters is invalid. Please check your entry and try again. »

    I use the same password I use to access the network on my computers, iPod touch etc. He uses it's WEP security protocol. ISP is Comcast, have the modem to bike and airport base station. Computer laptop connection very well etc. The player actually claims security WEP "key"; is it not my wireless password? Any ideas? Thank you!

    Santos L. Halper

    Solved. See messages in Apple Discussions:

    http://discussions.Apple.com/thread.jsp... 5 #12907765

  • HP Pavilion dv7-6b32us fan hums when fast running

    I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

    CaseyF wrote:

    I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

    Hello

    Take a look at the service guide.

    http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

    Your laptop must have a shared program Intel 3000 then choose the heatsink / fan for Intel UMA memory:

    http://www.eBay.co.UK/ITM/666392-001-new-HP-dV7-heatsink-fan-/360733774145?PT=LH_DefaultDomain_0&hash=item53fd689141

    How a manual with pictures from page 46.

  • How to get the speech recognition do not answer to outside noise

    How to avoid that speech recognition didn't respond to surrounding noises instead of my voice? It automatically turns on by itself.

    Hello

    Click with the right button on the speaker near the clock on the tongue - recorders - just below levels that you can
    lower level and the boost - also on the development tab, you can check the Noise Suppression. No doubt
    you will need to experiment with these settings.

    The microphone settings are also available in the control panel - sounds

    And there may be an Audio Manager appears in the Panel that has parameters.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • password Microsoft autoupdate

    How can I find the password so that I can do a Microsoft AutoUpdate. I contacted Microsoft very useful, but they said it was a problem for Apple. Your help would be greatly appreciated.

  • Can't find stuff listed in search

    After a number of emails by using the search for "Joe Blow", appear (36), but how do I know which folder the enamel is in? I think that they are physically removed a long time ago. I can't find them in any of my files, which are well organized. None

  • Satellite Pro C850-1GU - need info about partitions

    Hello I just bought this computer and I was check s settings, when I found that there are 3 partitions from disk:(1) recovery partition 1.46 don't Go no file system(2) hand to 451,55 NTFS partition(3) empty partition 12.75 go no file system After rea

  • Insert pictures of News Photos

    Hello When I try to insert a picture in Word for Mac or by downloading one in Hallmark Cards, I am only offered the former collection of iPhoto. Obviously since the April update all my recent photos are now in Photos. How can I access Photo for this

  • How to sort the shared Variable libraries

    I have large libraries SV in my project I want to sort by variable name.  I tried to export to Excel, sort and then import them into the library, but the type did not appear.  It looked like loading each variable then the multiple variables Editor op