"failure to communicate with the server" related to the vCenter mode

Similar Questions

• failure to communicate with the image drum?

  My m175nw is only 2 weeks... Everything worked great until I did the Firmware update.  Now, I get the following error and I think I printed only one (1) page since I bought this thing

  10.0004 power error
  10.1004 supply memory error

  There is a failure to communicate with the imaging drum.

  The update of the firmware was "2012-08-27, Version: 20120806, 10.28 M" and the error message

  10.0004 power error
  10.1004 supply memory error

  is the display on the printer control panel.   I was running Windows 7 (64 bit) at the time of installation, but I also have a system dual boot and can run MAC EVALUATE which the same message after restarting the printer.  Even with the computer turned off the M175nw displays the same error message.  As stated earlier, the printer is only 2 weeks, I think that I've printed 2 pages (with no problems) and the above-mentioned error did not appear after the update of the Firmware... I tried a reset to the default settings, but unfortunately that has no effect when the firmware has been updated.

• does anyone know what causes this sudden failure to communicate with the DNS server?

  My laptop suddenly stopped being able to connect to the internet. It has full signal and the modem works on a laptop another family (where I send you this). The error message "windows cannot communicate with the device or resource (primary DNS server), I followed the advice without success to date. What could cause do this all of a sudden?

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of the problems of connections for all McAfee users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• cannot communicate with the server DNS (66.81.1.251)

  I have a supplier of the Internet service provider and usually use ie9, but for a month or two, I'm using Google Chrome and, until very recently, I was not having problems. For a week now, I've been kicked almost like clockwork, and when I diagnosed my connection, I got the message "unable to communicate with the DNS server (66.81.1.251). I really prefer Chrome on IE9 because it's faster (I use dial-up). I would like to know what has caused this happens suddenly and want step by step instructions to resolve this problem. Windows help did not help.

  Hello desandjol,

  Most likely your ISP DNS servers may have changed.

  Look at the thread below for help troubleshooting:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Let us know if that helps.

• Having problem to communicate with the Dns server.

  Hello everyone, I'm having problems with my connection when I click Connect to the network diagnose it shows me this error message.

  "cannot communicate with the server of DNS (218.186.1.58).

  I'm a fall of MMORPG and disconnect from the internet, when I was playing or surfing. Can someone help me solve this problem.

  Hello Spiffie,

  You can try to uninstall the Windows Update on March 11 to see if that solves the problem.

  Remember that uninstalling the updates may require restarting the computer to complete uninstallation of the update. You will be notified to restart if the update does.

  Please post to let me know if this helps J

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Windows cannot communicate with the device he resourse (primary DNS server).

  Original title: primary dns.

  Help, please

  Windows cannot communicate with the device he resourse (primary DNS server)

  Please help me solve this problem

  If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

  If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

  BT has their own support forum if you have not already tried it - https://community.bt.com/

  See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

  in particular:

  How can I connect once I connect to the correct Wi - Fi network?

  Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

• Cannot communicate with the device or resource - primary DNS server

  I have problems with my laptop using windows 7.
  I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
  Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
  I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
  I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
  I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
  Thank you.

  Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

  Thank you again... Success!

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• How to block a DOS attack while allowing clients to communicate with the server

  I need a temporary solution for a dos attack. I am running Windows 7 Professional and need to block a DOS attack while allowing customers to communicate with the server

  Hi Vinniethetouch,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited to the

  TechNet forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Errors when trying to communicate with the server administrator

  I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.

  [01: 27:03] - incomplete deployment.

  [01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.

  [01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  [01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  However, the application server is successfully passed all the tests, the result below.

  JSR-160 LENGTH tests... success

  Tests of JSR-160 DomainRuntime... success

  JSR - 88 tests... success

  JSR-88-LOCAL tests... success

  Test server MBeans model... success

  ... Controller App tests success

  Tests of JSR-88-DEP-MGR... success

  JSR-88-DEP-MGR-LOCAL tests... success

  Tests of JNDI... success

  JSR-160 tests edit... success

  Tests of HTTP... success

  11 of 11 successful tests.

  I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.

  Any help is very appreciated.

  
  

  Thank you

  Vishwa

  Hi Vishwa, there.

  using JDev 12.2.1 to create fusion web applications means that you use ADF

  12.2.1 and you try to deploy this app on WLS 10.3 which

  knows nothing about ADF 12.2.1. This means that you must

  install and configure the ADF 12.2.1 libraries running on your application

  Server prior to deployment.

  Before that review certification ADF matrix to determine the

  version minimum 10.3 where you can run ADF 12.2.1-

  http://www.Oracle.com/technetwork/developer-tools/jdev/documentation/122-CERT-2708091.html#ApplicationServers

  However, you should check if installation 12.2.1 ADF will not

  installation of OBIEE break.

  Before you dig in fact ADF 12.2.1 installation can you pack

  your application developed in JDev 12.2.1 and deploy from the admin

  Console?

  HTH,

  A.

• After an edition upgrade to SQL Server 2008 R2 Standard, vSphere cannot communicate with the VIM_VCDB database

  My vCenter environment is 5.0 and has been initially implemented using SQL Server 2008 R2 Express as the database.  We have reached the limit of size of 10 GB for the Express version, so I want to upgrade the database 2008 R2 express 2008 R2 standard.

  Before the upgrade, I stopped the vCenter Server service before you start the SQL Server Setup program.  I did an "Upgrade Edition", to consider express standard.  It ends successfully with 2 minutes, and then I went and restarted the server vCenter service.

  However, after restarting the service, vSphere is unable to communicate with the VIM_VCDB.  For example, in vSphere if I click a virtual machine and click the performance tab, it tells me that it's impossible to view the web page.  It seems to be unable to communicate with the VIM_VCDB.  I have not changed all database names, or the ODBC settings, so not sure what is causing the problem.

  If I go to ODBC data sources administrator and test the Data Source, the test completes successfully.

  I have read all the documentation I could find and tried a few different things, but not found something that solves this problem.  I ended up having to go back to the snapshot backup, I took before the upgrade of the database edition.

  Anyone have any ideas on what the issue might be, or what should I do to solve it?

  Shane

  The database is probably fine.

  The vCenter Web Management Service running?