Becker card driver disk cannot be read from El Captain update

Similar Questions

• MISSING DRIVER? CANNOT DOWNLOAD PICTURES FROM ARGUS CAMERA TO THE COMPUTER?

  We use the firefox windows search engine 7 IE 10. We connected our argus camera to PC. put the driver disk in tray and follow what it says. Pilot not return here?  Why! tried several times to download the pictures off the coast of Eastern Argus camera back again with driver not not here? what I've done wrong? where is he! Thank you! :(

  Hi Gurnett,

  This could be a problem with the installation of the software for camera Argus file or disk from which you try to install the software. Sometimes also due to the fact that you may need to install the driver with the software application for the camera to install the software from the disk does not install necessarily pilots.

  Please help me with the following information related to the issue:

  (1) what is the exact error that you receive when you try to download images?

  (2) do you use Mozilla Firefox or Internet Explorer 10 download photos?

  I suggest to download the latest drivers on the Argus website and install it on the computer. Check to see if that fixes the problem.

  You can check the link to do so:

  http://www.argussurveillance.com/info.php?ref=download

  Just reply to us with the status of this issue.

• Lightroom will not import my Raw files from card CF. "Cannot be read." Help, please.

  Any tips?

  This error message is usually because don't have you read and write to the Destination folder in the correct Panel on the right of the import dialog box by using the options available in your operating system or choose another destination to copy the file to.

  You can also do a search on the forum as there are has dozens of similar positions.

• My Media Player will not play anything. In addition, my Flashcards with images cannot be read from las night.

  My media player played fine until about a month. No new program or anything has been added.

  Last night my memory card with photos/videos on it that wouldn't pop up asking me on my memory card display.

  Hello
   
   
  1. could you give me the exact and complete error message?
  2. don't you make changes to the settings of Windows Media Player?
   
  Method 1.
  You may need to rebuild the database from the Windows Media Player library.
  Here's how:
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
   
  Note: Windows Media Player automatically rebuilds the database.

   

  Method 2.

  Also, try the methods listed in the section below and check.

  Solve problems in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 3.

  To memory card problem, you need to change the AutoPlay settings and then you should get the pop up when you insert the memory card every time.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot play videos from the recent updates.

  Since I downloaded a bunch of updates from MS, I'm able to play any video.  As soon as the video starts, I get a black window and restart my computer.  I tried a bunch of dates in the system restore to get a message that it cannot be done.  I went to Ms. Mr. Fix it and discovered that Windows Media Player 11 does not work with Nero.  I had already deleted Nero, but did a search and found a bunch of files for Nero.  I deleted and then returned and he ran hard and used the "automatically fix problems."  A list has come to say that everything has been fixed.

  I tried another video, but it's the same thing.  So I restarted the fix, but this time the 'auto' is gray and all I had left to choose was "looking for problems and I will fix.  It came with a Nero codex.  I chose to delete it, but which has not yet fixed the problem.

  I was wondering if I can just re - install Media Player 11 - I can't seem to delete it again.  I get a message that it goes back to a previous version, which was 10 - but I'm still on display 11.

  I really don't know what else to try.  Any suggestions?

  Might be interesting to try to do a Safe Mode system restore.

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• Toshiba Recovery For Vista: 10-FC06-0002 "cannot read from source file or disk" Preinst.8

  I recently lost a hard drive and I had a new installed in a laptop Toshiba Satellite A305-S6905.  I ordered the recovery media and when I run it it starts copying files and then publishes the message "Cannot read from source file or disk" and says it's PREINST.8.  I don't know what that means.  The hard drive is new, the recovery media is new, and I don't know how to go further.  It gives me the ability to ignore and I anpother error message which says 10-FC06-0002, and that the recovery does not and click on 'ok' to restart the computer.  I'm at an impasse in circles.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You will need to contact Toshiba re problems with their recovery media.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A100 - ATI Vista driver moved - cannot read from device

  Hello

  I have the following problem:

  I downloaded the official Toshiba mobility driver for Windows Vista 32-bit (I had a Satellite A100 (PSAA9) for construction in mobility x 1400.

  Once I run the Setup, it will install the ccc, but the real driver, no matter what I do! If I try to install the driver manually, Windows says

  "Unable to read from the device (ATI Mobility X 1400).

  As an error during the installation. It will not work in safe mode, either.
  If anyone can help? Thx a lot!

  Greetz Jens

  Hello

  First are you sure that you have an ATI graphics card?
  The Toshiba driver page provides 2 different graphics drivers for A100 PSAA9E series; nVidia and ATI.
  Find out!

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Cannot open files from a disk

  original title: I received a DVD of an ebay seller with files jpg and pdf to this topic.  My XP Home Edition with service pak 3 do not read the files.  Is there and upgrade?

  My original disk Windows XP Home Edition is service pak 2.  I upgraded to service pak 3.  He still won't open the files to a disc that I got from an ebay seller.  One of my friends has an XP system that came as service pak 3 and it will open the files.  Windows 7 systems open the files normally.

  Y at - it my version of XP Home upgrade that will allow him to open the files?  I read on a BitLocker on Windows 7 feature that is probably causing the problem.

  Nothing to do with BitLocker

  Copy the files to your hard drive, make sure you read only is off, then try to open

• Cannot transfer photos from an sd card to computer

  Cannot transfer photos from my SD card Kingmax 1 GB using a HP 6160 top 3gzRAM vwindows Vista Ultimate 32-bit office. Open MY computer

  but no indication of the card,

  Thank you

  Raymond Ricaud

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista: How to customize AutoPlay
  http://www.vista4beginners.com/AutoPlay

• Cannot install VISTA on Satellite A100 graphics card driver

  Hi all

  I need help.
  I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
  The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
  Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
  We know what the problem might be?
  Did someone encountered the same situation?

  It's really frustrating...

  Thank you
  Jota

  Hi Jota

  Please check the different view on the same driver problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479

  Try to download the driver again and see your results. Thanks ;)

• Series TV downloaded from iTunes will not play on the portable media player error: media type cannot be read

  Series TV downloaded from itunes will not play on my player portable media. I get the message, "the media type cannot be read.

  Hi ChristopherEaddy

  
  1. what operating system is installed on the computer?
  2. What is the type of file that you try to play?
  3 is supported by Windows Media Player file type?

   

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  Please refer to the below planned links and check the formats supported by windows media player file. Check if the information helps-

  http://support.Microsoft.com/kb/316992

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

   

  I hope this helps.

• HL-DT-ST DVD - RAM GSA - H55L [CD-ROM drive] cannot detect, read, play CDs or DVDs.

  Running Windows XP Home Edition SP3 (build 2600) with LG HL-DT-ST DVD - RAM GSA-H55L [CD-ROM drive]. Updated all drivers and ran all the diagnostics; still only detect, read, or play CD or DVD.  Installed and run program Microsoft ATS Fix It - has not fixed the problem. CARPET directed me to this site.

  I had the system 4 years and have used the drive to read and burn many CD / DVD, so he's worked in the past.  Thank you very much in advance for any help you can provide.  I appreciate your time and your consideration.  MS

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.