become my brick wap54g

Similar Questions

• iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

  Tried to update OTA on my iPad 9.7 Pro 9.3.2 this morning - 128 space gray WiFi - and it doesn't let me do. 9.3.1 is the current operating system. I turned off the back. Same status. And then did a hard reboot - equal status. I turned on my iMac (mid 2011 running 10.9.5) try a connected update. No, same iTunes says 9.3.1 on iPad model is the current version.

  I still have a gray (1) settings > general > software update on the iPad, but no red (1) on the home screen settings.

  Just did a hard reboot and tried the new OTA - still says 9.3.1 update is underway. Once again connected to the iMac and that check for update. "This version of the software iPad (9.3.1) is the current version."

  iPod 12,9 Pro went to 9.3.2 What fine OTA, acknowledges iMac iPad mini (original) must be updated so it is not a problem with my iMac or it's OS. Just did the OTA update on iPM and it had the problem where I had to return my ID to get the update to install after you download it (as he did go to 9.3.1). He is installing... in the meantime... still holding... Finally, SUCCESS. [and I forget that there no TouchID]

  So my model which would have bricked, if I did the update earlier? And with the new version of update on the Apple servers it just doesn't let me update to prevent it from becoming a brick?

  I'm patient. I do not force an update.

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Toshiba still 8 Micro USB does not, does not charge

  I have installed Nokia PC Suite on my Toshiba Encore 8 tablet and connected my laptop Nokia C1 via micro-USB on my tablet.

  Since then, my Toshiba still doesn't recognize not the USB port, two usb devices or, more important, for the load.

  My tablet is now only 8% load, and I need to get the USB charge function working again while I have still a few charges left in the tablet to make the necessary changes (drivers, BIOS etc.)

  Can anyone help before my Tablet becomes a brick died without charge to the left?

  Hello

  Looks like we have a similar problem, although I have a different tablet model (AT10-A) and I did not install anything whatsoever... still, I'm having the same issue on the micro-USB port: it does not recognize the Chargers and USB connections with my laptop. To the point where it says 5% battery. I'll try to keep it connected to the charger, even if the Tablet does not seem to see it.

  How can I test if the battery is really in charge?

  Have you received support from Toshiba?

  Thanks and best,
  Luca

• I changed the date to January 1, 1970 and I rebooted, but it does not work, what can I do about it?

  Answer me please

  Why change the date of 1970?

  Your iPhone becomes a brick. You can try using DFU mode, although there is no guarantee that it will work.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

  Contact Apple support and ask for help.

• iPad security and multiple users

  I intend to buy an iPad Mini 4 (subject to change) for my sister who is currently in palliative care. She is devastated bed and needs to get his affairs in order and make some estate planning bills etc.

  I wonder if you can have the user double security with the iPad or the ramifications of the reset of the iPad once she spends or to access its iPad rather than it becomes a brick.

  I have already created my sister with iCloud account and I have the user name and password. I'm not sure I've ever had this situation come before. If I need to access the device what would be my options.  I guess she will tend to choose the fingerprint sensor, if it isn't bug or perhaps a simple access code instead.

  Any suggestion would be appreciated.

  Thank you

  I'm sorry to hear about the State of your sister, but I'm very happy that you asked these questions now rather than later when it could be too late.

  One person at the same time has an iOS device.  That's how they are designed.  So I strongly suggest you think in this way, which is to come:

  • Your sister has and uses the iPad.
  • Your sister has the iPad (as if it sells or it betrays) to a new owner.
  • You take possession of the iPad and set up like yours, as if it were a new device.

  To do this, before your sister frees him, here's what should happen:

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  So everything I want to say is that you are ready to run (or help run) all the steps in the article.  Once you get the iPad and be responsible, be prepared to make settings > general > reset > erase all content and settings (if it had not already been done).  When you do that, you can resume the iPad and it will have no memory of what either of the past.

• Repair iPhone-policy irreparable?

  Glass of my iPhone was broken on Aug.

  The glass has been replaced in the laboratories of my carrier with a non-original screen without my awareness.

  The touch sensor ID recently started functioning power on and off until it has completely stopped responding.

  I already managed to day 9.2.1 and my iPhone worked without the touch sensor of ID.

  I erased the iPhone and it downgraded to 9.2 and the ID of touch began to work again. After a few days, he stopped and has never worked since.

  I have updated to iOS 9.2.1 and the iPhone is brick (impossible to downgrade from 9.2 in unavailable).

  A premium dealer told me that a glass cannot be replaced without replacing the ID of touch as well. And their policy, as well as Apple is to change to another iPhone.

  Apple representative told me that they don't check and fix my iPhone, nor will the premium reseller (even to understand if I have original parts or not).

  I do not understand, if my iPhone screen is broken so I have to buy a new iPhone?

  My brother's iPhone glass was broken, he was replaced in his iPhone and a third-party laboratory 6 works with 9.2.1.

  I don't understand if the glass needs to be replaced by contact ID.

  I don't understand if unoriginality of the glass itself can lead to become a brick with the iPhone.

  I do not understand if everytime my glass, I have to buy a new iPhone

  I do not understand if I can find a way, if I have an original Touch ID or not (not Apple or a preseller Premium want to help)

  I do not understand if I can save my iPhone, if my Touch is damaged or just mundane parts

  Help, please

  Thanks for the help

  Your problem is with your carrier. They cancelled all guaranteed and forfeited all rights to the service by Apple when they replaced the screen with a counterfeit. Talk to them on this subject.

• Sony Vaio 13 Flip do not charge to 3%

  Hello

  My Sony Vaio 13 SVF13N13CXB Flip will not charge when plugged in and remains at three percent. Battery icon says "plugged in, not charging."

  Charge light amber does not illuminate during usage and only flashes for a moment when I hit the power button to turn the computer on or off.

  Is there a boot program or process, that I have disabled potentially who charge controls of this laptop?

  A few days ago I installed the Iolo System mechanic and he disable programs a bit, so I don't know if it's what he does. I've been through, and it's not like I've disabled something vital...

  I have upgraded to Windows 10 in early November and there was no problems until a few days ago, so I do not think this update had no effect on the battery does not charge.

  I also tried the care function battery in the Vaio Control Center without result - I turned on and after-hours care function to try to revive the battery charges and neither have worked.

  I also disabled the computer and left it plugged in UAB and conversely the computer turned off and left unplugged overnight (this problem is ongoing since almost a week).

  I tried to solve this problem in Vaio Care and who does not, I even reset my computer.

  Is there a possibility of charge cable is defective and that's all that I have to correct, because that would be the simplest solution.

  And if so, where I acquire one of these load of the cables since these laptops on is no longer on the market?

  I hope this isn't my battery, aka, I hope I don't have to send for repair.

  Any input or advice is much appreciated. Thank you for reading.

  Patrick

  RESOLVED:

  I left my computer completely die in having not plugged and turn until he went into this weird reset mode where he was turning power on and off until he eventually just turned off for good. Then I plugged it it in and AHA! -the charging LED amber light turned on and the computer began to load. I think that the computer has become sensitive and he knew that he would die so he is healed itself to charge to stay alive (IE. He understood that I was killing and allowing it to become a brick, but it also has a will to live it fixed itself). I'm just glad, it doesn't have the arm and I worry about the internet connection because it can communicate with other sensitive machines and start to take over the world.

• HP ENVY 17 Notebook: HP support Assistant constantly reported as 'Stopped working' in the reliability report

  System recovered 5 days ago and reinstalled personal software. (HP 17 t-k000 CTO/Win 64 bit 8.1Pro)

  Almost immediately HP Support Assistant would communicate with HP Server. The program has been downloaded and reinstalled more than a dozen times during the 5 days... .rebooting every time between installs / deletion. Download from different places in the website of HP... but always version 7.7.34.34A. HP cat could not help... like that, the program worked for a few minutes, even though I showed the tech "reliability report". (it's a play on words!)

  After recovery was over and I used S.A. to update the operating system. The first time I used the program offered to me by 14 updates (so I guess that the program was "not" long before I got the operating system)... the program has shown the updates have been downloaded, but each time the update failed to install (X) next to the icon of installation. Restart the program again and selecting 'Check the HP updates now'... after displaying little pictorial showing ets connection/download... Returns a message... "No updates available". AND a new error is reported to the report reliability with the date and time. Now, in the last day or so IE11 has stopped responding... see below... Even typing this proved difficult because the page no longer!

  Today, the Web page for this laptop shows there are 2 BIOS update F34A (May 22, 2015) and F.09 Rev.A (16 April 2015), but as there is no update available via S.A. I haven't installed these either... my latest information installed BIOS is F.34, 19/12/2014!

  Battery/power cycling has solved nothing... "sfc/scannow" shows no error in operating system,.

  All suggestions accepted

  Thank you

  

  @Stu2009

  Thank you for all the useful information. However, there is something that you're not quite right about. It is true that normally the default account created on a system, is normally an administrator account. However as a safety device which is part of the User Account Control (UAC), he essentially keeps running as a common user, then on an administrator account.

  You can turn off UAC (I would not recommend that), or you can find the executable file of your programs, right click and compatibility mean that it runs as an administrator by default.

  Most of the time that you actually benefit from privileges program not raise unnecessary, however. Only a handful of things really really need to access that provides the "Run as Administrator".

  With regards to the BIOS, I would recommend that you try only a BIOS update if you are running in regular broadcasts normally. A wrong BIOS update can become a "brick" that requires a replacement of the Board of Directors, so for me it's one of those things you do only as a last resort, or if it's part of a fix recommended a functional system.

  As these updates from CyberLink you can always try to install it manually if you need, since the support page for your system. And let me know if they still appear in HPSA, after a manual installation.

  HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

• XP Home OEM locked fixation after replacing the motherboard

  I am repairing a HP Pavilion with XP home SP3 locked to the motherboard fried as a favor to a friend.  My friend insists on XP and wants / needs to preserve installed programs & data on the disk (which is always good when tested elsewhere).  He has some company reprogramming s/w radio, which only works on XP.  We know that it will buy a commercial version.  I can't find what really works, said http://support.microsoft.com/kb/292607 that it can be upgraded to XP Pro (that he would) but which covers only SP1.  My proposed seller says House cannot be upgraded to Pro without a complete reinstallation and did not oem home home retail.  XP Mode under W7 pro is not an option, if the serial port-> time of radio is not quite right, expensive business radios becomes expensive bricks and it will not run the risk as it will be with XP on new MB/CPU.  There current image backups, but they are always blocked, of course.  The drive passes the test of the provider (in another machine, of course).

  Can XP Home SP3 OEM evolve into XP Pro SP3 without a reinstall (i.e. reformatting & install)?  Can XP Home SP3 OEM be 'upgraded' to XP Home SP3 detail without having to reinstall?  Is there a better way (with XP) to solve this problem?

  Thank you!

  Final result: after the installation of the new motherboard, the installation of XP Pro SP3 retail disc does not recognize the installed XP home SP3, said that he was not an operating system on the partition and did not offer an option to upgrade.  The software provider was right, and the article cited above wrong, at least for SP3-> SP3 on this particular configuration.

  Then, I started from the original hard disk and attempted an activation of the phone, which didn't.  The robovoice said of trying to update the license key, that I made using one on the COA, then try activation phone even once.

  It worked.  There are more drivers to dl and install, but the box still works with a new MB and dual core CPU without a reinstall or OS update.

  So despite all the stories about tattooed motherboards and cannot reactivate XP if they are replaced, the real recovery was relatively simple.

• ThinkPad x 22 locked bios

  BIOS of my laptop is way out of date.  I downloaded the last being, but the update failed. The reason seems to be that the BIOS is locked i.e. modifications are disabled. It doesn't seem to be a BIOS password so I can enter the fine BIOS settings, but no changes can be made. The laptop works very well in many ways, it would be nice to have updated. The same problem exists with the on-board controller program that I downloaded it, too. Any ideas, please? (I'm under XP Home SP3) Thank you.

  What you have on this machine, it's probably a supervisor password. That's why you can get, but can't make changes.

  Once the CMOS battery dies X 22 will become a brick.

  Forum rules don't allow password cracking technical discussion so here almost everything, I can say on the subject outside the "good luck".

• BlackBerry cell phone locked Z10

  I bought a z10 on ebay, but I didn't have any id original bb. Unfortuntly, I forgot to disable the bbm protect when I update os 10.3.2.xxx. Finally, my z10 becomes a brick...

  Fix. If you do not have the password originally BBID then the device is more usable. Return it if you can.

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• AS100V Cam action freezes / turns into a brick

  Purchase just this new cam action a few days ago started using it yesterday parsimony; basically tried some functions.
  
  I see a very annoying problem:
  
  After login with my iPhone PlayMemories Mobile 5 s (maybe go in and out of the application, as in normal operating conditions), the LCD would display screen 'movie' with flashing icons, including the word "Wait".  This screen does not disappear even after a long wait and PlayMemories Mobile can't connect to the cam when this happens.  If I can go to another screen by pressing 'Previous' or 'Next', screen flashing including 'Wait' goes, and I can go to the other functions/menus.  But if I then turn 'Power Off', then the cam will not turn on again next time I click on 'Previous' or 'next '.  It becomes dead as a brick.

  I have to remove and reinsert the battery, then the cam working again.  But the same problem occurs.
  
  I tried to reset; does not solve the problem.
  
  Does anyone have a solution?  It looks like the software on the cam action and/or PlayMemories Mobile app is buggy... but I don't really know.
  
  I don't think I can keep this device if it behaves like that...

  Hi Sufi of the convenience! Please make sure that the memory card is inserted correctly. The error message 'MEDIA' is an indication of the following:

• Improvement of the reception of the WAP54G - advice needed

  Hi, I got hung a pair of units WAP54G, down the bridge of 100 meters from our House, in a holiday home.  One is connected to our router, the second is in the remote region, with a switch, then a third WAP54G distribute the signal in this remote area.

  This set works like a charm, BUT as it is a holiday home, we really need to put out of sight, bridge unit in the loft.  For the moment that it is in the direct line of sight to another unit, they are both on the window sills.  It's OK, but we'd like to get the second bridge out of sight to keep people from bothering with it.  I tried to put in the same position as on the windowsill, but in the loft, where he is originally of cladding (no brick etc, just wood and plastic), but he can't see the other device when it is in this position.

  Are there branches that I would be able to buy to give a better reception on this bridge? Ideally I'd like a pair of outdoor units I can screw to the wall on the respective buildings and then put a short cable (2-3metres) back inside the units.  This brings me to the second part of the query - boxes have two antennas on the back of them.  When I set up an antenna to gain high only just leave the second OEM stick to the back of the unit, or what? If these antennas be deployed as symmetrical pairs, or anything like that?

  I'm really happy for the operation of the system, on the whole, I want just a small extra reception!

  Thanks much for any reply and the advice on that.

  There are a number of commercially available external antennas. Anything with 7dbi or better should work fine. The connector is referred to as a RP - TNC

  Just mount the WAP54G near the antenna in order to reduce the length of antenna cable and mount the external antenna (outdoor) on the map of the barge and your outside.

  Get power and Ethernet for the WAP54G should be very simple.

  Concerning

  Fred

• Brick power (330w) turn off when SLI Active M18x R1

  Has anyone encountered problems with 330w power brick?

  Currently if I'm with disabled SLI game machine is rock solid and stable, no problems at all.

  If I enable SLI and load a game, 10 seconds into the game, my pace drops to single digits and passes under operation on battery. If I look at my green light brick fades slowly, at first, I thought that my surge protector was staggered so I tried different outlets and whenever I started the game with SLI brick would simply turn off.

  There is no error on the laptop, no smell, no problem loading the laptop, no problems in the course of execution on a single card, its only when the power requirements are important.

  If I unplug or turn off the brick and it works well again.

  Support tell graphics cards and motherboard that we should replace, its def not the brick.

  Since last August, the laptop has 5 graphics cards replacement, 2 cables SLI, 2 motherboards, 3 sinks heat, 2 thermal pads, 4 ram modules, 3 visits of the engineer and becomes a bit tedious.

  Problems requiring maps charts and motherboards replaced have now been resolved, the system is stable, no unexplained is crushed, everything seems solid, just the power brick problem now.

  Brick power dying.