Before authenticatie with ACS 3.3

Similar Questions

• WLC 4402 impossible to authenticate correctly with ACS 5.2

  For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped

  Controller of >

  user:

  password:

  No matter what I typed (internal or external users), nothing seems to work.

  It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.

  Hello

  Please delete privilege on the ACS level settings.

  Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks

  By default the privilege - do not use.

  Maximum privilege - not in use

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages

• Local use and authentication AD with ACS 5.6

  I have an ACS 5.6 unit configured to use AD authentication for my default network access and rules. It works very well.

  I tried to implement some features, put them in a group and give only locally defined ACS to users access to these devices.

  Problem, after you have created the local accounts on ACS creates a group of local identity, and trying to authenticate with a camera, I always get "object not found in the identity store.

  Is there a way to have the hybrid authentication like that? How do we?

  Hi Colin,

  One thing that comes to mind is "sequence of identity store. Ensure that you have "internal users" listed in there otherwise that demand would never be mapped against the internal users.

  I also want to double check the source of identity under default device admin or any service that you created. Ensure that internal users.

  Take a look at the document below for more details on the identity store sequence.

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-se...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Group-lock for users of vpn with acs

  Hello

  Is it possible to controll what VPN profile, a user is allowed to use by Cisco ACS or the router?

  2811 router IOS 12.4 worm, ACS 4.1 using

  I just want to be sure that the VPN allows the user only the Client Profile assigned to them and no other profile groups.

  Example:

  User123abc gets their hands on a profile of co-wokers.

  HR_User_Profile.pcf

  SALES_User_Profile.pcf

  User123abc belongs to the Department of human resources and should be able to authenticate with HR_User_Profile. If User123abc is trying to authenticate by using the access SALES_User_Profile should be rejected.

  Any documentation explaining how to set up?

  The ASA will be your option. This should be controlled by the values of tunnel-group and class-group policy, group-lock, ACS and ASA

• To authenticate with Kerberos for TimeMachine on OSX Server

  Hello

  Someone has an idea, how I can use Kerberos to authenticate with the TimeMachine service hosted by a server OSX?

  We use Mac clients in an Active Directory environment. Rules of procedure requires users to change their password after a few weeks. The problem: advertising knows the password, so the OSX Server knows the password, but the customers still have the old password stored in the keychain. So they try to connect to the service time machine with the old and evil, and that powers won't work. With Kerberos, this could be resolved.

  Any ideas?

  We use Mac OS X on the clients and server OSX 5.0.15 10.11.2

  Thank you!

  How to set up Time Machine?  System preferences or via a Configuration profile?  I'm guessing the system preferences.

  Try this command on one of your customers:

  tmutil destinationinfo

  If the value of the URL looks like this:

  AFP://user@host._afpovertcp._tcp.local./TM_Staff/

  Then you connect using Hello and so you're outside the Kerberos realm.  You can try to change the destination of a fully qualified host name or use configuration profiles.  What is the server bound to AD?

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Installer of Windows Vista. -Error message: "another installation is already in progress. That completes before proceeding with this installation. »

  When I go to open Word or PP files I get a message "another installation is already in progress. That completes before proceeding with this installation. "There is no other facility. I can't install the Vista updates either. I suspect a problem with windows Installer.

  marcus1145944z,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Twitter: Failed to authenticate with OAuth.

  Hi, I'm getting the following exception:

  java.lang.SecurityException: not able to authenticate with OAuth.

  Code:

              Credential c = new Credential(CONSUMER_KEY, CONSUMER_SECRET, tTOK);
              UserAccountManager uam = UserAccountManager.getInstance(c);
  
              try {
                  if (uam.verifyCredential()) {
                      TweetER.getInstance(uam).post(new Tweet(sTweet));
                      System.out.println( _res.getString(I18N_MSG_TWITTEROK));
                      //Dialog.inform( _res.getString(I18N_MSG_TWITTEROK));
                  }
              } catch (Exception e) {
  
                  System.out.println("Error by posting tweet:" + e);
                  //Dialog.inform("Error posting Tweet: " + e);
              }
  

  and it allways thrown on line: TweetER.getInstance (uam) .post (new Tweet (sTweet));

  I use a sample from the API Twitter ME http://kenai.com/projects/twitterapime/pages/Home

  I've already created the Twitter Application and got the consumer key and Secret.

  Does anyone has any idea of what could be the problem?

  Thks!

  Hello Jppedroso,

  can you please try this code.

  http://supportforums.BlackBerry.com/T5/Java-development/Twitter-is-integrated-in-BlackBerry/m-p/1700...

  Pawan

  Thank you

• Permission of AAA with ACS Shell-games

  Hi all

  I use a router cisco 871 running that version 12.4 (11) T advanced IP Services.

  I have difficulty getting permission to AAA to work properly with ACS.

  I am able to configure ACS fine users and assign them shell and private level 7.

  I then install a set of Shell Auth and enter the issuance of orders and configure.

  When I log in as a user, I get an exec with a level of 7 priv no problem, but I never seem to be able to

  to access global configuration mode by typing in conf (or set up) terminal or t.

  If I type con? It is the only command connect, configure is never an option...

  The only way I can get this to work is by entering the command:

  privilege exec level 7 Configure terminal

  I thought the whole purpose of the ACS Shell Set to provide this information to the router?

  It's frustrating

  The ACS server is set up with the Shell Set named Level_7 order authorization

  It is attributed to the relevant groups and I have the 'Unmatched orders' option selected in the 'license '.

  The "unmatched Args allowed" is also selected.

  See an extract of my IOS config below:

  AAA new-model

  !

  !

  AAA group Ganymede Server + ACS

  Server 10.90.0.11

  !

  AAA authentication login default group local ACS

  AAA authorization exec default group ACS

  AAA authorization commands 7 by default local ACS group

  !

  Cisco radius-server host 10.90.0.11 keys

  !

  !

  privilege exec level 7 Configure terminal

  privilege exec level 7 set up

  privilege exec level 7 show running-config

  privileges exec level 7 show

  !

  Hope you can help me with this one...

  PS I tried with orders of privilege on the router and remove the router and just keep getting the same results!

  Hello

  So now,

  You're actually using two different options and trying to couple then together. What I would say is you either use authorization Command Shell function or play with level privileges. Not mixed together both.

  Above scenario might work, if you move orders to focus on level 6 and give the 7 user privilege level. He couldn't be sure. Try it and share the results.

  That's what I suggest that orders back to a normal level.

  Provided below are the steps to set up the shell command authorization:

  -------------------------------------------

  Follow these steps on the router:

  -------------------------------------------

  ! - is the desired username

  ! - is the password

  ! create - us a local user name and password

  ! - in case we are not able to get authenticated via

  ! - our Ganymede server +. To provide a backdoor.

  password username 15 privilege

  ! - To apply the aaa on the router model

  AAA new-model

  ! - Following command is to specify our ACS

  ! - location of the server, where is the

  ! - ip address of the ACS server. And

  ! - is the key which must be the same during the FAC and the router.

  radius-server host key

  ! - To get the authentication of users through ACS, when they try to log - in

  ! - If our router is unable to join the ACS, we will use

  ! - our local user name & the password that we created above. This

  ! - we prevent locking.

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization config-commands

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  ! - Sequence of commands are for posting to the activity of the user.

  ! - When the user connects to the device.

  AAA accounting exec default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  --------------------

  ACS configuration

  --------------------

  [1] Goto 'Profile components shared' a-> 'Shell command authorization sets'-> 'Add '.

  Provide any name at all.

  provide sufficient description (if necessary)

  (a) for full administrative access set.

  In the unmatched controls, select 'allow '.

  (b) for all access limited.

  In the unmatched controls, select "decline."

  And in the field above 'Add a command' box, type in the box below and the main command "permit unmatched Args" Order under allow.

  For example: If we want the user to only have access to the following commads:

  opening of session

  Logout

  output

  Enable

  Disable

  Show

  Then, the configuration should be:

  -----------------------------------------------

  -Allowed unparalleled Args.

  -----------------------------------------------

  connection permit

  permit disconnection

  exit permits

  Select the permit

  disable the permit

  license terminal configuration

  ethernet interface license

  permits 0

  to see the running-config

  ------------------------------------------------

  in example above, user will be allowed to run only from commands. If the user tries to run the interface ethernet 1', the user will get "failed command authorization.

  [2] press 'submit '.

  [3] Goto Group on which we want to apply these command authorization set. Select 'change settings '.

  (more...)

• Integration of ASA with ACS

  Hi all

  I try to incorporate some ASA (8,6) with ACS (5,7), here is the configuration of the SAA.

  SH run | in aaa
  RADIUS Protocol RADIUS AAA server
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (management) host 10.243.14.24
  GANYMEDE + LOCAL console for AAA of http authentication
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA accounting console GANYMEDE + ssh
  AAA accounting command 15 GANYMEDE privilege +.
  Console telnet accounting AAA GANYMEDE +.
  AAA authorization exec-authentication server
  AAA authorization GANYMEDE + loCAL command

  The problem is that I can get connected to ASA, but I can't type all commands in the CLI, I get the error message "failure of command approval.

  I have the same sets of commands and the shell profiles created for switches and it works perfectly.

  This is the behavior of ACS journals

  1. once I am having authenticated, I can see the logs in ACS with my username
  2 but when I type any commnds, is put down my permission and I see in the newspapers of the authorization of the CSA that this username is "enable_15".

  Can someone help me identify what the problem is

  Thank you
  Reverchon

  This happens when we have control permission enabled on ASA and try to run any command level 15 on SAA. To correct this problem you must check enable authentication of a user against GBA / GANYMEDE.

  AAA authentication enable console LOCAL + GANYMEDE

  After above listed licensing order, ASA will start to check the enable password against ACS/Ganymede and you use Ganymede activate the password that we can put on by user.

  ~ Jousset

• 6513 isn't intergrating with ACS

  Hello

  I have a problem with one of the devices, switch 6513. the acs server is directly connected to the switch inside the fwsm.

  I am able to ping the MSFC and FWSM ACS server, but it does not take the ACS. I have other 6513 and many other switches and router integrated normally with ACS.

  Please I need help.

  Kind regards

  Incase you are using Ganymede and deliver "Ganymede source control interface ip.

  User interface that is listed in the acs network---> switch---> IP address configuration

  Switch must use this IP address as the source for the packages of Ganymede

  Kind regards

  ~ JG

  Note the useful messages

• Admin Auth LMS with ACS 5.3

  Hey people, I need to integrate LMS4 with ACS 5.x for LMS user auth. 2 roles are necessary, Admin and monitor. Y at - it all Documentation, example Configuration, or other useful information? Any help welcome.

  Best regards, Michael

  Hi Michael,

  Perhaps these threads will give you enough details:

  https://supportforums.Cisco.com/message/3484567

  Best regards

  André

• Cisco 1121 unit installed with ACS 4.2 SE version

  Hi all

  Sorry, we could install version to 4.2 on the Cisco 1121 device acs?

  Could we use 1120 ACS 4.2 image DVD to install on 1121?

  Or any workaround?

  THX!

  Calvin Su

  Hi Calvin,

  Unfortunately, 1121 hardware doesn't support version 4.2.0 acs so downgrade is not an option for 1121. It can only be used with ACS 5.x

  Kind regards

  Jousset

  The rate of useful messages-

• Authentication EAP - TLS with ACS 5.2

  Hi all

  I have question on EAP - TLS with ACS 5.2.

  If I want to implement the EAP - TLS with Microsoft CA, how authentication computer and user will be held?

  Understand that the cert is required on the client and the server end, but is this certificate to the computer links or links to individual users?

  If the links to the user, and I have a shared PC connection by few users, is that each user account will have their own certificates?

  And each individual user will have to manually get the CA cert? is there another method that my environment has more than 3000 PCs.

  And also if it binds to the user, any user can get their CA cert with their AD username and password, if they bring in their own device and try to get the CA certificate, they will be able to properly install the cert in their device on the right?

  I hope you guys can help with that. Thank you.

  Hope this will answer most of your questions:

  Client certificate or user

  http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T10

  Computer certificate

  http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T15

  In the case of EAP - TLS we have the certificate of computer and user installed on the machines.

  Kind regards

  Jousset

  The rate of useful messages-

• URL is not change after successful authenticate with ISE 1.1.1

  Hello

  I have install Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)

  Everything is complete, unless the redirect URL. My customer comments can join the SSID of comments and also can authenticate to ISE.

  But after they success to authenticate with ISE, the URL in the browser does not alter the pre - configure. There still be something like https://ise-ip:8443/guestportal/redir.html . Anyway the content in the browser is replaced by the URL that is configured as http://www.google.com/

  How can I do with this cause of situation that everything works well, but only the URL of the browser that is not a change to the sits one.

  Thank you

  Mathias

  Hello

  See if this thread will help, what you can do to work around the problem, is to redirect all authentications to a single Web page.

  https://supportforums.Cisco.com/message/3664154#3664154

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

  Hello

  You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

  Thank you

  No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  What also good technical details are necessary.

  Mylenium