Before clean install I had 64 system now I System 32

Similar Questions

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• Licensing has stopped working after a clean install of the operating system for CS4

  I did a clean install on my Mac Pro, now my CS4 doesn't work anymore. Gives me error code 150:30 (licensing has stopped working). I can't disable it on this computer because the help option is not available. So I can't turn it off before you uninstall and then reinstall. What is the best way to get this working again please? This is the Suite of Master CS4. Thank you...

  Hi, Del, thank you very much - I tried the correction of license options but I also do not have the same files (FlexNet), so I reinstalled and my app are now opens again.

  All happy it is now resolved!

  Kind regards

  Carmen

• I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome

  I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome.
  I tried all the advice I could find on the help section, but nothing works. I reinstalled everything is new so it's all of this to date, but not a single site Ustream.tv will load. I can put them on IE and chrome.

  The question may be because of your corrupt cookie (cookies.sqlite) file

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookie present as cookies.sqlite - journal in the Firefox profile folder where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/deleting+cookies

  You can also check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled

  ______________________________________________________________________________

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See creating a profile:

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
  
  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Windows 7 doesn't have a network card after that I did a clean install of the operating system

  After doing a reinstall full Windows 7 my manufacturer's CD, I can't connect to the internet or a LAN wired or wireless, probably because the BONE is not an installed network card, in accordance with the resolution of the problems Windows. I reinstalled the operating system again and again, and I still have the same problem. What can I do next to install the network card? I am ignorant full when it comes to Windows/Apple stuff (I'm a Linux user, but I need a Windows PC to run specific working software) so thank you in advance for any help.

  Hello

  Welcome to the Microsoft community.

  It seems that the driver for the network adapter does not work on the computer. May not have been installed properly.

  Please answer these questions so that we can better help you.

  1. What is the brand and model of the computer?

  2 was the work of (internet) network adapter before the reinstallation of Windows 7?

  3. What is the status of the NIC in Device Manager?

  To check the status of the device,

  (a) press the Windows key + R , type devmgmt.msc and press enter.

  (b) to expand network adapters and verify a yellow exclamation point.

  (c) make a right click the adapter and click Properties and check the device status on the general tab.

  We have to download the drivers for the network card on the system manufacturers site and install it on this computer.

  Get back to us with the required information for we can help you.

• Drivers WIFI 14 m, before clean install

  Hello, I INTEND to reformat my Thinkpad Edge 14 Type 0578 to a Windows 64-bit instead of the current 32-bit 7Enterprise. Pro. But I understand that a lot of people have had problems finding wireless drivers. Is there something I can do in ADVANCE to make sure that I don't have wifi problems. Can I backup the drivers I currently have? Where is my wireless driver? I know I have a realtek 8192 but don't know which. I went on the realtek download site and found all these:

  RTL8192CE-VA4

  RTL8192DE-CU

  RTL8192 8192 OF VC

  RTL8192DU - VC

  RTL8192E

  RTL8192SE

  RTL8192SU

  RTL8192U

  The only way to test it would be on a machine as your running 64 bit Windows 7 with the same WIFI card.

  Just make sure you install the driver for power management and the utility of keyboard shortcuts.  After getting your machine put in place with the 64-bit version, install and run TVSU and it will find and install your drivers and utilities for you.  You need to install net.framework 3.5 SP1 of MS first in order for TVSU to run.

  Update Windows will try to install the driver for the PM, don't let it.

  I saw these threads, I was in one of them.  If you have problems, we understand them.

  Kind regards

  Dave

• V. ultimate language download offering not languages after a clean install of the operating system and install live SP2

  After a new installation of Vista 64 Ultimate w/SP1, download and install SP2.  Several updates auto installed without problem, but the languages other than English are not being offered as if they were on the previous installation.  I have deparately need to install one of them.
  How can I get the update to bring me languages?  MUI, I think they are.

  Microsoft said that SP2 with full language support will not be available until later.

  I suspect that this is your problem.

  http://TechNet.Microsoft.com/en-us/library/dd335038.aspx

  «Microsoft will release five languages (English, German, Spanish, French and Japanese in the first version) and a set of additional languages 31 in a second wave sometime after the first version.»

  Microsoft partner

• Reformatting drive before clean install of XP

  My XP PC is dead and I need to install XP from scratch. My HD is NTFS. When I start the PC from XP CD it starts when coming to "starting windows" and copy all the files I'm blue scren. I need first to remove NTFS patition, but never using XPCD, could help.

  Hello

  · What is the number and the model of the computer?

  Please visit the below links for more information about the same:

  Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760

  How to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  How to partition and format a hard disk using the Windows XP Setup program: http://support.microsoft.com/kb/313348

• X 220 clean install. Now, no OSD and the battery don't charge threshold

  Hello world

  I installed an mSATA SSD last night with the 2.5 hdd 320 "stock on my X220i (4286-2AU). I did a clean install of Windows 7 on mSATA, that will be my OS drive.

  I installed most of the drivers for the devices, but note that even if most of the function keys (FN +...) (the WIFI FN + 5 even does not), is no longer there we're working on a display on the screen. I play with this before clean install so I know that with the factory settings, OSD worked very well. I check the display properties in Windows and on screen display is checked.

  In addition, in the power manager, I have more the possibility to set minimum and maximum battery charge start and stop the thresholds.

  For the power management driver I installed only
  Power Manager for Windows 7 (32 bit, 64 bit), Vista (32-bit, 64-bit) - ThinkPad

  and to the left of two other pilots:

  • Driver ThinkPad Power Management for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP (32-bit, 64-bit) - ThinkPad
  • Module ThinkPad Power Manager Patch for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP - ThinkPad

  I've also already installed I think I should have to take care of OSD but I guess I was wrong:
  Integration of features Hotkey for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP (32-bit, 64-bit) and 2000 - ThinkPad

  but decided to jump:
  ThinkVantage Access Connections for Windows 7 (32 bit, 64 bit) - laptops

  Would appreciate any help on this matter. He's not a killer, but thresholds OSD and battery were something I was looking forward from that installed clean.

  Thank you!!!

  Hi alanbrenton;

  Did you put it in there.

  This must go with shortcut keyboard and Power Manager.

  Dave

• Reformat Windows 7 hard drive for the next clean install Windows ISO 10

  This is in anticipation of the next clean install of Windows 10 ISO.

  It is understood that I need to move from Win 7 to win 10 first, before clean install. (Select MS verify the legitimacy)

  It is understood that I need to reformat the hard drive before a clean install.

  It is also understood that the "recovery disk" can reformat the hard disk.

  ===================================================

  One of my computers in Win 7 I would successfully created the "recovery discs. (Wonderful)

  --------------------

  Problem:  My other Windows 7 (Vista upgrade) will not let me create the "recovery discs.

  When you do: start / run / recovery

  It allow me to create "backup and restore disks. (This is not the recovery disks that I need).

  ===========================

  Question: How do I reformat my another computer on Windows 7 (Vista upgrade)?

  Note: Two computers are different: the first is a HP, the other is a gateway.

  ("Partitions" of hard drives may be different.)

  I don't know: if I can use the recovery made the first computer disc to reformat my second hard drive?  If this isn't the case, I'll be in trouble, because I don't know how to reformat my second computer.

  You need to use the means to reinstall that you can upgrade Windows Vista Setup to format the drive.

  The other system recovery media is likely to not work, but you can always try, but have appropriate reinstall media just in case.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Clean install of Windows 8 coming with the 0x8007025D error Code

  Hello

  I bought a Windows 8 Pro upgrade for my system under Windows 7 Home Premium. I have a Dell Inspiron N5110.

  I downloaded the upgrade Assistant Manager and he ran. Eager to do a clean install, I did an installation of Windows 8 ISO on a USB key.

  I then upgraded my version of BIOS A02 to A11. (Successfully)

  Now, I started the installation by booting from the USB drive. Eager to do a clean install, I had to format all disks and create new partitions.  After that the actual installation has started and he went on the fine up to 35% (Getting Ready files). After the 35%, I got an Error Message with the error Code: 0x8007025D.

  I'm still stuck in the same situation. Since I formatted my whole hard drive, I don't have any BONE to return and that the files on the USB.

  Troubleshooting tried-

  Tried to start installation from scratch. Did not work.
  Delete all new partitions and tried again. Did not work.
  Unplug all unnecessary devices. Did not work.

  After reviewing various forums online, I think the groundwork here would be to recreate the installation drive (USB key). But since I formatted EVERYTHING, I can't launch Manager upgrade again on the same laptop.

  Please suggest a work around as soon as possible.

  Thank you.

  Hello
   

  Thanks for posting in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

   
  The problem may be with the ISO that you downloaded. I suggest to re-download the ISO and then try to install to check the issue.
   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• Report of panic stay after a clean install (MacBookPro3, 1 mid-2007)

  Hello

  My mac is often restart with a kernel panic. Often when I use safari with several tab reading or video.

  Before clean install I try 'associated web' application unistall like Adobe flash player, add the block, but the problem remains still.

  I try to fix it by clean install, but the question still remains with the "clean" os (in my old data, configuration, preferences, etc.).

  So I think is a physical problem, because it is an old mac, but I need to confirm.

  I'll try to downgrade to OS X Yosemite or more to see what Issos are still but I wait download it again for now.

  I copy my last panic report on pastebin following link:

  http://pastebin.com/Gfgcwrw0

  Thank you for your future assistance.

  PS: Sorry for my English writing.

  The logic board is a failure. After 9 years of use, it is time to replace the machine.

• If I do a clean install, I have to reinstall all my software

  Hello!

  Filipe my name is

  I have a MacBook Pro 2010, which is compatible to install the Mac OS Sierra

  It is very slow and I would like to do a clean install of the operating system new

  I know that I have to do a full backup of all my data - photos, emails, documents,... - but if I take the decision of the new facility, I have to reinstall all my applications, programs,... - as Office for Mac,...?

  Thanks for your response!

  Only, or restore from backup.

  (144882)

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I had to do a clean install, now I have problems to register upgrade

  Due to a problem of Windows Explorer that kept crashing I had to do a clean install of my Vista Ulatimate. Now it doesn't let me save the program. I've tried doing a reinstall and that didn't stop my crashing Explorer. Forum was probably fifty solutions to this problem, which has not worked for me and Microsoft told me they didn't help me solve with out charge me, so now they're trying to me live in the purchase of a new program or the upgrade and that sucks.

  You MUST start the process after WIndows starts - do not have the DVD in the status bar when you start, but insert once started.

  To be honest, you should have settled this first thing - now, all you can do is try to uninstall SP2 and hope it works, but be prepared for a double-full installation if it does not work properly.

  http://www.winsupersite.com/article/product-review/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista