Before the race 'emca' questions

Similar Questions

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• Loading before the images (preloader question) images

  I have a .swf which is 83%, images and weighs about 4 MB.

  This large size, I decided I'd do a preloader, however, framework of the preloader will load only after images and other resources are loaded.

  Basically, the preloader will appear after 83% of the .swf is loaded, who leaves the white screen for a moment and then only display the preloader.

  In even simpler terms, I want to set the priority of loading something (a resource? a scene? a frame?), or only a single image to load, then let that govern loading the rest.

  Please report if you did not understand what I mean.

  Yet once, for each symbol (in your library) related to export, uncheck the export in frame 1.  then test.

• Journal of the iMac in question

  Hi, I have a late 2012 27 "iMac. He has recently started to generate random passwords in the log at the stage. The only solution seems to be the power down and reset the PRAM. It's happening almost daily now. This doesn't seem to be affected by the defective hard drive model.

  Does anyone have any suggestions? Thank you very much.

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Before the test Questions Captivate 8

  Hello

  I use Adobe Captivate 8 and I've added a question 3 before the test.  I edited the first issue and made my questions multiple choice that I went to the second issue of pre-test and that of prestest #1 appears in the pre-test, #2 and #3.  Why - what is duplicate my original question on all the other before the test?  I have no idea how to get rid of on pre-test #2 and #3.

  Any help would be greatly appreciated.

  So weird. Then try: delete preferences. Close the project, locate the CleanPreferences file that is appropriate for your system in the subfolder "Utils" of the captivate installation folder and run it. Then restart Captivate. Are you running it as an administrator (if you are using Windows)?

  

• Restore database HRCS90 question: until THE TIME which was before the RESETLOGS

  People,

  
  Hello. On December 2, 2013, I backed up my instance of database with RMAN with Oracle Linux 5 HRCS90. the backup of the database to run correctly. 2 files 'full_0doqhbqc_13_1' and 'full_0eoqhce9_14_1' are saved in the /backup_database_instance_HRCS90 directory.

  
  Because my HRCS90 database has been damaged, I need to restore the database to HRCS90 until the time 02-Dec_13 when it is saved. I have run the commands below:

  RMAN > RUN {SET until TIME ' to_date (February 12, 2013: 00:04:56 ',' DD-MM-YYYY: HH24:MI:SS') ";} RESTORE THE DATABASE ;}

  Its release: complete the restore to February 11, 14.

  SQL > alter drop database datafile offline 121;

  Its release: alter database.

  SQL > alter database open resetlogs;

  Its release: alter database.

  SQL > shutdown immediate;

  SQL > startup;

  Its release: mounted database. Open database.

  
  So I can execute select * TableName off HRCS90 the database successfully.

  Because the HRCS90 database is corrupted again, I need to restore it again on December 2, 2013. I have run the commands below:

  In the directory/u01/oradata/HRSC90 /:

  [user@linux HRCS90] $ rm *.dbf

  RMAN > Connect target;
  RMAN > RUN {SET until TIME ' to_date (February 12, 2013: 00:04:56 ',' DD-MM-YYYY: HH24:MI:SS') ";} RESTORE THE DATABASE ;}

  Its output:

  RMAN-03002: failure of the set command
  RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS.

  My questions are:

  Is that mean 'UNTIL TIME' before the RESETLOGS? How to solve the problem to restore the HRCS90 database?

  
  Thanks in advance.

  you have run this on your system.correct source?

  Try

  (5) name of the element: / home/user/OracleDB_Home/dbs/c-612194578-20131202-00

  Check the included file: cash SNA: cash 1947113 time: 01-DEC-13

  This backup must be available on the local system.

  HTH
  Anuj

• Strange question before the header function call

  Hello
  
  I use Oracle APEX 3.2.1.00.10 with a database of Oracle 10.2.0.4. It seems that when I call some functions in an anonymous plsql block a page header before I get
  
  ORA-01858: a non-digit character was found here where was waiting for a digital
  
  errors. The functions in question accept 2 types of NUMBER and RETURNS a type NUMBER. The code works correctly PLSQL. Is there a limit on the size of a function I can call
  directly from APEX or maybe theres some type conversion happening?
  
  All the ideas that it is rather strange that the other functions seem to work well
  
  Thanks in advance!

  As Paul said, there are probably some date related code in the body of the function. The reason why it performs very well outside the APEX is perhaps because the default NLS_DATE_FORMAT value is different to what uses the APEX. Try to play with it, hope that helps.

• Returning to the question before the amendments update

  I rebooted and installed the updates on my computer this morning.  After completing the installation of the updates, I received a message that says updates have been misconfigured and that he was back to before the changes and do not turn off my computer.  He had run this message for more than half an hour, how much I had to leave the machine.

  What does that mean?  What should I do to fix?  How can I get back on my computer?  When I left, I was unable to get out of this error message and a password to connect.

  I have a Windows Vista machine equipped Dell.  Installation and configuration of updates usually takes some time, but not a long time.

  Any help is appreciated.

  Assumed as replied, without other added messages

• Recently I had to reformat my hard drive and comuter backed up my files before the new format. He files saved as MINWINPC but my question is. How to open them. I use Vista Home Premium

  I have a HP A1730N with factory installed Vista Home premium installed. I had a problem and after that windows has saved my computer I did a system restore

  operating mode. I reinstalled Vista and now I'm trying to recover my files in the backup.

  My question is how can I open backup. He saved my files in a file MINWINPC and inside it, there are 5 files Backup.001,.002,.003,.004,.005

  Can anyone help

  Hello

  If HP makes recovery backup as part of their cover of the factory contact HP

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  If Vista does the backup:

  Repost in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Simple question about the race of the Illustrator borders - help please!

  Hello

  I'm new to Illustrator, and I can't understand something.

  I have a simple rectangle with a fill color, say red and a color of outline of us Let's say blue. Then, I use the drop down menu on the horizontal tool bar options change the race of a simple contour to something that looks more like a decorative edge. In CS4, I use the last option on the drop down menu, which has to stroke brain/border corners around the inside of the curve. When I chose this option, the filling remains as a rectangle with sharp corners that 'out' where the accident vascular cerebral/border curve inwards.

  I would like to know how to keep the race/border while getting rid of corners of the rectangle that die. I tried the erasure of the rectangle, but negatively affecting the border/stroke shape.

  Thank you very much for your help.

  David

  There are a few ways (or maybe more) to do. Both involve separating the object into two parts, one with a fill and no respect and the other of a sudden and no fill. Make sure that the trace object is on top and apply the brush line, then lock it. Add and remove anchor points at the four corners to get the below form (magenta rectangle) that will be hidden by the brush line. You can also do it using object > decaying appearance to generate the two forms of the original.

  

• the RAC - Question on Openfiler configuration test

  Hi all:
  
  Follow this doc to implement two-node rac http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html
  
  I managed to install Linux on two nodes linux1 and linux2 by doc above.
  I managed to install openfiler on the third node, powered by rpath linux by doc above.
  
  According to the document above and the next step, I need to configure iSCSI volumes using openfiler. The document speaks using the browser through which Openfiler administration is performed.
  
  The issue I'm facing is, I can't get the browser installed on openfiler. How can I do this?
  This node is not connected to the internet.
  I downloaded mozilla firefox on a usb key, how can I access the USB on the openfiler and install the browser?
  Is there a GUI for openfiler?
  
  If anyone has experience with this, I appreciate if they can share.
  
  Thanks a ton
  
  San ~

  Openfiler needs to run a web server. Then you should be able to access from a browser on other machines to which it is connected

  Perhaps the best way to go.

  Published by: bigdelboy on April 28, 2009 10:10

  NB: The RAC forum would obtain generally better supported.

• I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download

  original title: installation FIXIT

  I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download?

  Hello

  1. What operating system do you work?
  2. What Fix - it you are trying to install?
  3. What version of internet explore do you use?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  http://support.Microsoft.com/kb/555375

  You can try the following:

  Remove temporary internet files

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Also try to save the file on your computer, then run it.

• RMTTRAIL must be specified before the FILE/TABLE/SEQUENCE

  Hi Experts,

  Just trying to debug this issue. Please help me in the question of fixing.

  Currently this is my approx.

  OS - OEL 6.3

  DB - 12.1.0.1

  GRID - 12.1.0.1

  2 node RAC

  I have a Container 1 (c1) with PDB (p1, p2) 2 and trying to replicate of C1. P1. SH-> C1. P2. SH for a single table and below is my param file and I recorded extracted and added to GGSCI

  EXTRACT C1SH1_ED

  SETENV (ORACLE_SID = "c1")

  SETENV (ORACLE_HOME=/opt/oracle/rdbms/12.1.0.1)

  SETENV (NLS_LANG = 'AMERICAN_AMERICA. AL32UTF8")

  SETENV (NLS_DATE_FORMAT = DD-MON-YYYY HH: MI: SS AM)

  USERIDALIAS ggc1

  DISCARDFILE. / direrr/c1.dsc, APPEND.

  REPORTCOUNT EVERY 30 MINUTES, FARE

  STATOPTIONS REPORTFETCH

  WARNLONGTRANS 5 m, 3 m CHECKINTERVAL

  WILDCARDRESOLVE IMMEDIATE

  LOGALLSUPCOLS

  UPDATERECORDFORMAT COMPACT

  SOURCECATALOG P1

  Table SH. T_DELS;

  then I tried to run the EXTRACT and the weiredly I see this error (please let me know if I make a mistake)

  RMTTRAIL must be specified before the FILE/TABLE/SEQUENCE <-this is what I see in my ggserr.log

  2014-05-26 00:32:01 INFO OGG - 02695 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: syntax of the ANSI SQL parameter is used for the analysis of the parameter.

  2014-05-26 00:32:01 INFO OGG - 02095 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: successfully set ORACLE_SID = c1 environment variable.

  2014-05-26 00:32:01 INFO OGG - 02095 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: set successfully ORACLE_HOME=/opt/oracle/rdbms/12.1.0.1 environment variable.

  2014-05-26 00:32:01 INFO OGG - 02095 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: set NLS_LANG = AMERICAN_AMERICA successfully environment variable. AL32UTF8.

  2014-05-26 00:32:01 INFO OGG - 02095 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: variable environment successfully set NLS_DATE_FORMAT = DD-MON-YYYY hh: mi: SS AM.

  2014-05-26 00:32:04 INFO OGG - 03522 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: setting session time zone at the source of database timezone "GMT".

  2014-05-26 00:32:04 ERROR OGG - 00362 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: RMTTRAIL must be specified before/SEQUENCE/TABLE FILE.

  2014-05-26 00:32:04 ERROR OGG - 01668 Oracle GoldenGate Capture for Oracle, c1sh1_ed.prm: PROCESS ABENDING.

  2014-05-26 00:32:04 INFO OGG - 00975 Oracle GoldenGate for Oracle, Manager mgr.prm: client_start_er_prog failed.

  2014-05-26 00:32:04 WARNING OGG - 01742 Oracle GoldenGate for Oracle shell: command sent to MGR MGR returned with an error response.

  2014-05-26 00:33:29 INFO OGG - 00979 Oracle GoldenGate for Oracle, Manager mgr.prm: EXTRACT of C1SH1_ED is down (free of charge).

  2014-05-26 00:38:30 INFO OGG - 00979 Oracle GoldenGate for Oracle, Manager mgr.prm: EXTRACT of C1SH1_ED is down (free of charge).

  -extract is registered and has successfully added.  Please help me

  I still wonder why we see RMTRAIL when we check out local config

  Add this parameter to your setting

  exttrail ./dirdat/ll

  and run the following statements:

  GGSCI > remove from C1SH1_ED

  GGSCI > add from C1SH1_ED, tranlog, begin now, NET 2

  GGSCI > add exttrail. / dirdat/ll, extracted from C1SH1_ED, 100 MB

• I get a message saying that firefox has prevented the dangerous 'adobe flash' plugin of the race

  my flash player IS up-to-date, but firefox crashes and I get this error message
  Firefox prevented the dangerous 'adobe flash' plugin of the race (some im webpage on)
  Let me know how I can fix this? AS SOON AS POSSIBLE

  Hi Janetc69,

  I had the same problem, after having informed me with a few mags of PC online, I simply uninstalled Adobe flash player in my laptop.
  Since then, I got no problem with playback of videos with firefox browser. What more, it seems to work better than before.
  Anyway most of the browsers are slowly remove Adobe flash player on their systems.
  If this does not work you can always reinstall Adobe, try it.

  Good luck!

• Apple Watch freezes during the race

  I used my Apple Watch during a 21K run. I used the training software to monitor my heart rate during the race.

  After the mark at halfway, the screen dimmed, and the screen froze. (stopped adding distance, and heart rate has been replaced by '-'.)

  thinking that it was because of the excessive sweat on the sensors, I tried to wipe the back of the better watch that I have (which is not a lot considering everything that I had on me was wet). by pressing the digital Crown to return the screen to the face of the watch, but whenever I go to the app to drive he would show the same frozen screen.

  It is only after a kilometer (about 7 minutes) made the response to training app and worked normally until the end of the race.

  for the purposes of the workout on my Apple Watch concerns, I had only run 19,71 km instead of the 21 K who I actually ran.

  question: How can I prevent this happening again?

  Hello

  As a first step, if you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  It can also help to revive your watch:

  • Restart your Apple Watch - Apple Support