Beginner needs help

Similar Questions

• Flash beginner needs help with Movie Clips/Action script

  HI -.
  
  I'm having a problem with my video clips playing simultaneously and cannot, for the life of me, know what I did wrong. I'm new to flash so I can I have created something wrong but this is what I have so far:
  
  11 layers, total: 1 layer with 10 buttons, each button with the following actionscript code:
  
  
  on (release) {}
  gotoAndPlay (85);
  }
  
  
  When the number changes with regard to keyframes, the next film is about.
  
  I have 10 films, total, but they are only video clips, mainly photo slideshow with audio, does everything in the library.
  
  The problem occurs when I click on the second or third button. Not only the movie I selected starts to play, but all previous clips are as well, he has completely blurred all the sounds. I don't know what Miss me in action script, as my Action layer has a stop command to this topic at each keyframe where there is a new clip to play.
  
  I tried to add a stopAllSounds command, but I'm afraid that does nothing because it is not an "audio file" in itself playing in the timeline panel.
  
  I'm at the end of my rope and really need help to understand this one. My project is hanging in the balance on this point, I wrote everything correctly and it works beautifully.
  
  Help, please!
  
  Thank you
  Caroline

  Start your sounds in frame 2 and place stopAllSounds() on each keyframe where begins a movieclip.

• ASA550 VPN works do not, Cisco beginner needs help!

  Hi people,

  I have to spend at Cisco Juniper, and I can't get a VPN. I tried hollow CLI and ADSM, and in both cases, I don't see any incoming ipsec packets on the other end (Juniper SSG) when I ping a remote host on the other network.

  Here is the config:

  !
  ASA Version 9.0 (1)
  !
  gw hostname
  activate 7qkORHwefwefwefwefyAiVSEQH4Q encrypted password
  7qkORHywefwefwefwefSEQH4Q encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  passive FTP mode
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  network of the SDC_Beheer object
  10.104.0.0 subnet 255.255.0.0
  access extensive list ip 172.16.1.0 outside_cryptomap allow 255.255.255.0 object SDC_Beheer
  access extensive list ip 172.16.1.0 inside_access_in allow 255.255.255.0 object SDC_Beheer
  inside_access_in of access allowed any ip an extended list
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  !
  network obj_any object
  NAT dynamic interface (indoor, outdoor)
  inside_access_in access to the interface inside group
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  Enable http server
  http 172.16.1.0 255.255.255.0 inside
  Server SNMP location Bergen op Zoom
  Server SNMP contact Joris Kemperman
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec transform-set esp - esp-sha-hmac DESSHA1 ikev1
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  peer set card crypto outside_map 1 5.200.1.5
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map interface card crypto outside
  trustpool crypto ca policy
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 172.16.0.0 255.255.0.0 inside
  SSH timeout 60
  Console timeout 0

  dhcpd dns 8.8.8.8
  dhcpd lease 3800
  dhcpd field lindebaan73.local
  dhcpd outside auto_config
  !
  dhcpd address 172.16.1.30 - 172.16.1.157 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal GroupPolicy_5.200.1.5 group strategy
  attributes of Group Policy GroupPolicy_5.200.1.5
  Ikev1 VPN-tunnel-Protocol
  joris AewHowjZEPeq.vge encrypted privilege 15 password username
  tunnel-group 5.200.1.5 type ipsec-l2l
  tunnel-group 5.200.1.5 General-attributes
  Group - default policy - GroupPolicy_5.200.1.5
  IPSec-attributes tunnel-group 5.200.1.5
  IKEv1 pre-shared-key D1nges!
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:2498ca347e17bcfa3a8a5ad9968e606c
  : end

  ______________

  I think its either a NAT problem (ASA no tunnel traffic but simply translated and passed to the next router) or access list number.

  It already took me a lot of time to spend on what goes wrong.

  Anyone here who can help me?

  Hello

  You need to do no. NAT for the subnet you want to go through the tunnel.

  Thus, to create a group of objects to destination as source allows src1 and dest 1

  NAT (inside, outside) source static/dyn src1 CBC 1 destination dest1 dest1.

  For more information:

  https://supportforums.Cisco.com/document/44566/ASA-83-NAT-exemption-exam...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• PIX 501 config probs - beginner needs help!

  Have a bit of a nightmare trying to set up external access to one of our servers through the pix. He is currently in its factory config.

  I tried assiginig an Acl to allow the remote desktop on port 4999 from outside, but it doesn't seem to work. I have attached the config in its current form - please help this is driving me crazy!

  1.) basically the NAT public IP address to a private IP address is on the right of ADSL router. Check that!

  ADSL Public IP TCP 4999 to PIX outside TCP 4999

  (2.) the config on the PIX should be good, as I posted it.

  Redirect port of PIX outside IP TCP 4999 inside private IP TCP 4999

  3.) make sure that your server meets the port TCP 4999 really!

  On windows or Unix =

  netstat - year

  You should see something like this:

  TCP 10.0.0.3:4999 0.0.0.0:0 LISTENING

  4.) another way of troubleshhot might be using "capture" on the PIX. This like tcpdump UNIX a sniffer that can show packets on an interface. I do not remember what version, this command was introduced, but you will need at least an OS PIX 6.3.x to have.

  Example:

  access-list 120 permit tcp any any eq 4999

  capture of 4999 interface 120 outdoor access list

  See Access Snapshot 4999 list 120 retail

  To use remove:

  no interface access-list 120 captures 4999 out

  No capture 4999

  Change inside interface:

  capture of 4999 interface 120 of inside access list

  See Access Snapshot 4999 list 120 retail

  sincerely

  Patrick

• Flash CS5 beginner - need help with Add URL link animated banner

  I apologize if this is a very basic question, but I am a newbie in Flash design. I created a basic animation in Flash CS5 and I need to add a clickable URL link. I tried a few tutorials that seemed promising, but none of them solved my problem. I tried a number of things, including the conversion to parts or all of the simple images buttons or movies and linking them this way as well as type in the code ActionScript 2 and 3, which none was successful. The animation plays correctly in my browser, but when I click it, the link does not work. I wish that the entire banner clickable to take viewers to the website linked instead to use the text of the hyperlink. Also, when I open the Code snippets window, it is empty, any image or image I selected. Do I need to import snippets of code somewhere or just will I things the wrong way? Any help is greatly appreciated!

  go to your help section and search the reference Guide of Action Script 3.  It is the repository of all the possibilities of ActionScript with Flash and Flex.  You can consult the alphabetical index URLRequest and navigateToUrl.  There could even be code samples included.  I haven't looked right, but you'll probably get before doing so.

  Best,

  -markerline

• Beginner needs help please

  I have some trouble setting a new file in my site to come.
  I did an external css file and I want to fix it to the new file.
  The banner, footer, navigation is the same for all pages.
  So if I understand correctly, I need to set the div in the new file.
  But I'm starting from scratch and there is nothing in the file.
  Please notify.
  
  I llove to just copy and paste these objects on the pages, that's why I created an external style.
  
  Thank you

  SSI = "server-side includes. Use F1 help DW and Google learn more about
  This.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "jody25" wrote in message
  News:gignfp$4kq$1@forums. Macromedia.com...
  > I really appreciate the help.
  > I'm going to start a new topic with my next question, but even if I'm here
  > What SSI (PHP)?
  > I know that I've heard of PHP.
  > Certainly do not envy what I'm going through.
  > Thanks again
  >

• For loop - pl/sql beginner needs help

  Hello guys and girls. I'm still struggling with loops and cursors and must create one today. You are my last resort I read at length this afternoon.
  
  I need to run in sqlplus and code for each combination of my output columns of cursor that I create a csv file with the data of the declaration contained in the Forum... loop.
  
  I'm not sure why it does not work and I am sure that I have huge mistakes in my process. Maybe you can give me help on this one?
  
  Thank you very much
  
  SEB
  

  declare
  
  cursor c1 is
  
  select 
  fallennr, 
  merkmal,
  int_fallennummer, 
  schaedling
  from (
  select      to_number(b.lng_falle) lng_falle,
              to_date(b.date_datum) date_datum,
              to_number(b.int_fallennummer) int_fallennummer,
              to_char(b.kw) kw,
              to_number(b.lng_schaedling) schaedling,
              to_number(b.int_volumen) int_volumen,
              to_number(b.int_anzahl) int_anzahl,
              a.name alf,
              to_char(a.fallennr) fallennr,
              a.alf_login alf_login,
              a.merkmal
              from borki.vt_fangzahlen_tageswerte_2010 b
              inner join  borki.vt_fallenstandorte a on b.lng_falle =
              a.objectid
              where
                to_date(b.date_datum) > to_date('31.03.2010','DD.MM.YYYY'))
                 group by fallennr, merkmal, int_fallennummer, schaedling;
                 
  begin
     
     for i in c1 loop
       
  define logname = date
  column clogname new_value logname
  
  select 'c:\temp\myexport_'||c1.fallennr||c1.merkmal||c1.int_fallennummer||c1.schaedling||to_char(sysdate, 'yyyymmdd') ||'.csv' clogname from dual;          
  
  spool '&logname'
  
  select 
  alf || ';' ||
  fallennr || ';' ||
  merkmal || ';' ||
  int_fallennummer || ';' ||
  schaedling || ';' ||
  kw || ';' ||
  to_char(sum(int_anzahl),'99990D99') anzahl
  from (
  select      to_number(b.lng_falle) lng_falle,
              to_date(b.date_datum) date_datum,
              to_number(b.int_fallennummer) int_fallennummer,
              to_char(b.kw) kw,
              to_number(b.lng_schaedling) schaedling,
              to_number(b.int_volumen) int_volumen,
              to_number(b.int_anzahl) int_anzahl,
              a.name alf,
              to_char(a.fallennr) fallennr,
              a.alf_login alf_login,
              a.merkmal
              from borki.vt_fangzahlen_tageswerte_2010 b
              inner join  borki.vt_fallenstandorte a on b.lng_falle =
              a.objectid
              where to_char(a.fallennr) = '28'
              and a.alf_login = 'ne'
            -- and to_date(b.date_datum,'DD.MM.YYYY') between TO_DATE(sysdate,'DD.MM.YYYY')-42 and TO_DATE(sysdate,'DD.MM.YYYY')
            -- and to_char(b.kw) between to_char(next_day((to_date(sysdate)),'Sonntag'),'iw')-6 and to_char(next_day((to_date(sysdate)),'Sonntag'),'iw')
              and to_date(b.date_datum) > to_date('31.03.2010','DD.MM.YYYY'))
                 group by alf, fallennr, merkmal, int_fallennummer, kw, schaedling
                 order by kw, schaedling;               
             
             spool off;
      end loop;
  end;
  
  exit;

  Hi, Seb,

  Yesterday, knowing very little about your needs, I said it sounded as if utl_file was the best way to get the desired results.
  Today, a little more about what you want, I can say without a doubt that this utl_file is the best way to get the desired results. You're actually disable features (such as headers and column of packaging) that could be helpful to use the COIL. Use utl_file and save a lot of time for you now, and for those who must maintain the code in the future.

  If you want to help with the approach of SQL to SQL, after a test case complete (including CREATE TABLE and INSERT statements to recreate some of the data. Simplify the problem as much as possible, so that you still get the same error, with a minimum of code.
  It would be useful to post a copy of your script generated dynamicaly, weekly_all_clients.sql, which causes the error.

  Do one of your values includes the ampersand, '& '? If so, change the character that marks the substitution variables for something that does not appear in the values of the arguments. Example of RPF

  SET  DEFINE  ~
  

  To include spaces in a value, quote the variable when it is used after the = sign in a statement to DEFINE, as you already:

  DEFINE     this_x_id     = '%1'
  

  and also when you call the script. In other words, you should do something like this:

  SELECT DISTINCT
       '@weekly_one_alf'
       , '''' || fallennr          || ''''
       , '''' || alf_login          || ''''
       , '''' || int_fallennummer     || ''''
       , '''' || schaedling          || ''''
  FROM     (SELECT ...
  

  in your main script, weekly.sql.
  You can use either single - or double - quotes. Most people use quotation marks, because they fear that the confusion in the code.
  Whatever you use, the value can contain either.

• Beginner needs help with SimpleReadWrite

  After reviewing the NI-488.2\Examples\DotNet3.5\SimpleReadWrite\vb (which works fine) in "step" mode I can not yet discover the command which

  sends information on the device string. If I declare: BoardID As String = "0" Dim, Dim PrimaryAddress As String = "13", Dim SecondaryAddress As String =

  '0', Command1 dim As String = "* IDN?" what comes after?. Is this the right approach? What else do I need to know, and where and how I can find it?

  You did not add the assemblies to your project references list, as I have indicated in my note at the end of my answer lat. This is done through the project-> add a reference... menu item. Be sure to select the assemblies that are located in the folder of VS2008, where you have installed the support for multiple versions of .NET. This is distinct from the required Imports instructions. The Imports statement allows to simply do not have to write the full name of the class. So, having a NationalInstruments.NI4882 import you can declare a variable as

  GpibDevice private as a device

  instead of the full name

  Private GpibDevice As NationalInstruments.NI4882.Device

  What about the ReplaceCommonEscapeSequences error, well, you actually have this function in your form. This copy of the SimpleReadWrite example function.

  You should check that your device is expected for the command. Require a carriage return after the order? Require a line break? If so, you must change the definition of Cmd1 to include these characters, as is done in the SimpleReadWrite example.

  TesTech wrote:

  I will surely find a tutorial or take a book to learn more about VB.NET, as soon as I can get this thing going.

  It's just to make life 100 x harder for you. The above errors would have been clear, if you knew how to program in VB.NET.

• Beginner needs help with Aironet 1131 G Wireless Access Point

  I have a new Cisco Aironet 1131 G wireless access point.  It takes an IP address and I can ping this address.  However, I can't access it via the graphical user interface based on the web or the CLI.  I preformed reset.  Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  I can't access that means? you are not able to go to the CONFIG T of the CLI prompt? and if you are in the same subnet as the AP, are you not able to open to the top of the GUI? If you are not able to then, with the command 'show version' on the AP CLI and see if your image is "RCVKW8". If so you will need to convert the same IOS using the method below.

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1038660

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Premiere Pro beginner needs help

  Hello-

  I'm new to first Pro CC.  I am looking for tutorials, but I don't know what terms to search for.  I want to see the video on the façade of a building.  The building will be a still image.  I know that I have to cut out the building and make a layer (I think) and probably reverse.  Help, please!

  Thank you

  -SPLITTERS

  Have a look here:

  Photo in the photo tutorials

• Beginner needs help loading Quick Books

  I'm to assess using VMware Fusion as a way to bring QuickBooks (on the Dell at work) to the House and continue my accounts on my Macbook, then take the data date back to Dell and load the data updates back in the Dell and so on.  Is this really possible?  So far, I have a Virgin copy of Windows XP, downloaded on the merger, how QuickBooks in there, and how do I get my current data in there?

  Yes it works and basically make you the same way you would on a physical computer, or between two physical machines.  You insert the QuickBooks CD and install QuickBooks in the Virtual Machine Windows and then you can use a USB Flash drive to transfer a copy of QuickBooks company data file and or file to backup QuickBooks company from one computer to the other.  It's as simple as that.

• Beginner, need help with ActionScript 3.0

  Hi all
  I am a newbie to flash and have little experience with OBJECT oriented programming (and therefore of action script), so I apologize in advance for my lack of knowledge. I think it is easy enough to fix, just don't know the syntax or if there is a better way to do it. Here's my problem:
  
  I created a flash file which has a card (like a layer of the base image) with 4 quadrants, I created separate layer (converted to a button) which corresponds to the limit of 1 of the 4 quadrants, and added a simple script, I copied and modified since a tutorial Adobe (see syntax). Instead of a new webpage to appear and the text output "I clicked" I want a new window appears with the plan of each quadrant (which is another image, jpg).
  
  I don't know what is the syntax to call this new image upward once your mouse over individual quadrant.
  
  Thank you
  

  Try this code. It should simplify what you want to do. Just replace the real names of new html documents that you want to open.

• have downloaded adobe flash player and ran it, but I still cant play you tube videos and tells me I need Adobe flash player.beginner. Help!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • I have problems to get adobe flash player to work. I was in safari and wanted to watch you tube
  • I got a message from fall I need adobe flash player. I downloaded and executed. a message from drop to close safari. I closed safari and tried many times to run the program and have it done, but I still can't play video on you tube. Im a complete newbie and need help!

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Jheadstart beginner

  Hello

  I'm new on JHeadstart. I need to migrate forms to ADF using JHeadstart oracle and need help. I have the suite version of JDeveloper

  

  According to the guidelines of this version compatibility matrix:http://www.oracle.com/technetwork/developer-tools/jheadstart/jhs-jdev-supportmatrix-084434.html

  I should be using JHeadstart 11.1.1.4 or 11.1.1.5 version

  I had actually installed JHeadstart via Jdeveloper using Hekp-> check for updates navigation and it seems that it has installed Version 11.1.1.3.33 (I don't know. it's what appears in the Index of the JHeadstart Documentation), which is not compatible with my version Jdev

  For this reason, according to the after screen shot, I'm not able to see "JHeadstart Forms2ADF" generator option during the creation of ADF BC.
  

  
  

  
  

  How can I get an older version of JHeadstart, which is compatible to my JDeveloper?

  Help, please!

  
  

  Thank you

  Amit
  

  You need a license to download a full version. The evaluation version includes no Forms2ADF

  http://www.Oracle.com/technetwork/developer-tools/jheadstart/jheadstart-FAQ-085254.html#BM4a

• Need help with loops

  Hi all

  I am a beginner in Labview. If need help in loops. Please check the attached vi and suggest me the procedure I followed is effective or not. If this is not the case, correct me.

  Waiting for answer

  According to the commentary of diagram, table sizes are all 16, then here is everything you need:

  

  (Hmm, clips chiseled Booleans in the constant diagram, just ignore that)

  "Elements of an array AND" checks if all a real (upper thread)

  'The GOLD table elements' check if at least one is true. (all others)