problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

Similar Questions

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

  HP LaserJet 200 colorMFP M276nw'm not going to sleep no matter how configure configuration.

  It ' on an Ethernet cable. WiFi and FAX are disabled. No local USB not connected. LCD Panel and web access see the that he was put to sleep after so many minutes of inactivity.

  He used to go to sleep, that is the LCD screen is off and the power LED flashed, as expected after the period button inactive specified, 15 min...

  I'm not 100% sure, but I guess it started showing this symptom as I replaced the black cartridge with a genuine HP one. Nothing has changed, and I doubt that if the issues of the cartridge. I've updated the firmware to 20150212, but no help.

  When I tried to update the firmware locallly, the LCD panel said he is not able to connect to the server even though it is perfectly on our LAN and connected to the Internet. For example I can scan documents to send to e-mail addresses.

  All attempts resulted negative. So I have a chat session with a HP tech support but it could not solve the problem. In addition, there was a much more serious problem with the printer which toners all came out with less than 100 printed pages. However, HP has launched a warranty replacement process and I'm waiting for the forthcoming replacement.

  Thank you, John, to remind me of important base of troubleshooting by isolating the problems one by one!

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

  Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

  Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

  Lists network ID as NPI138751 hostname with no domain listed.

  The wired configuration netwrok lists as connected.

  Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• HP Laserjet Pro 200 ColorMFP m276nw stopped printing

  I installed the all-in-one color HP Laserjet Pro 200 m276nw a couple of months and configure for network printing. So far, it works perfectly for everyone in my house. Whenever I try to print, nothing happens. Can print other in my house that are on the network. When I go to the print queue dialog box, I get the message: "printing - the printer is unresponsive." If I go into printers and faxes application in system preferences, it shows this printer as inactive. I tried to restart my laptop (Macbook Air), turned the printer market, turned Wi - fi market, enabled Bluetooth market, even tried to connect to the printer via the cable. What can I do else?

  Hi Robvale,

  Welcome to the HP Forums!

  From what you described, it seems that the print job do not leave the print queue. I've included the document 'cannot print? Print jobs are stuck in the print queue'. Please select your version of Mac and follow the steps listed.

  If you still have problems after that, please provide me the version of Mac OS X, you're running. I've included the document 'find your OS X version and compilation of information', if you need it.

  Impatience on your part.

• HP LaserJet 200 colorMFP M276n: printer don't wake up when the print job received

  Hello

  The all-in-one printer in my company does not work well as it does already.

  He supposed to wake up when receiving print jobs, but it doesn't. Tap the user Panel must then only it starts to print. After that the user can do another trouble-free printing. We have setup this printer on LAN and I checked the console EcoSmart that all wake up on the events are checked. (i.e. USB, LAN, contriol Panel & fax ring).

  Another thing I found is the ink cartridge 2 have low supplies, do not know if this is causing the problem, however.

  Pls advise me what will be the possible causes?

  Thank you.

  CC

  Hi Sabretooth04,

  Thanks for your sharing.

  Just to inform that my problem is resolved by changing a new ink cartridge.

  So probably because the small amount on cartridge a message pop up in the users and once this last conrol touch she will continue printing.

• Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

  Kindly help, I tried to update the firmware, but still my web services will not turn on.

  RGS

  G

  Hi GayleneC,

  Thank you for the update and additional information.  I really appreciate it.

  You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

  After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

  1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.
     
     
  2. Please click on the 'Network' tab as highlighted in the screenshot above.
     
     
  3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.
     
     
  4. Please click on the "HP Web Services" tab.
     
     
  5. Please click on the button "activate". Print the newsletter of Web Services.
     
     

• EPrint registration don't DO NOT WORK in HP Laserjet 200 M276 PCL6

  I bought this printer and its only to be able to print on the shot, but the Web ePrint service or better allow the same won't work.

  The printer is HP LaserJet 200 colorMFP M276nw PCL6, serial number is CNF8G6S398, the support of the computer is a notebook of EEE from Asus with Windows 7 Home Premium Service Pack 1.

  Update the firmware to version 20140521 (version 20140718 does NOT work) to see if it was a problem of firmware, the problem remains the same, it does not via the Server Web integrated in my browser, either from the control panel of the printer, this code, you may not have.

  The printer works regularly in the local network, here in this link all the configuration parameters (the firmware has been updated as shown in the link is old, but the rest of the configuration is the same).

  https://drive.Google.com/file/d/0Bx7PIMyN30XKenQ5YnJSbkFLQzA/view?USP=sharing

  I'm really frustrated, three days of work without being able to allow that the only feature I really needed.

  Problem solved by Jerebko (very thanks) to this thread

   

  http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Eprint-amp-LaserJet-Pro-276nw/m-p/4738076/highlight/false#M115390
  

  

• HP LaserJet 400 colorMFP M475dw scan to E-mail problems

  Hi all!

  I would appreciate a solution to my agony.

  We recently purchased a printer HP LaserJet 400 colorMFP M475dw. Now, I'm putting in place (browser-> Scan--> the outgoing message profile administration) to send scanworks by e-mail but face the following problems:

  1. when it is correctly typed all the credentials, even the "Test & Save" option takes forever. After cople attempts I got it successfully tested.

  2. with the help of my personal gmail accout as the sender, sweeping work takes a lot of time. It stops in the phase connection smtp server for quite a long time before even starting the actual analysis.

  3 using the company newly created accounts of e-mail as a sender, it takes even more time. I timed it just 6 minutes and 23 seconds before the actual analysis.

  4. now, it seems to send the scan ok, but with some first attempts it failed with some general error message asking to try again.

  In my opinion, the time it takes is completely unacceptable. Is this a known problem and is there a workaround?

  Our company emails run on MS Office 365 and I use smtp.office365.com as server smtp port 587 and SSL/TLS ticked (tried also unchecked). As I said with Gmail, it would also slow but still very very very slow.

  Help, please?

  I know this is an old thread, but just in case anyone is still having problems with this - I managed to fix it by disabling IPv6 in network-> advanced in the web server administrator. Connect to smtp.gmail.com from 3 minutes + seconds.

• HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem

  Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen

  Hi @U-Talents.

  Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.

  I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.

  Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.

• Given to zero cold/reset HP LaserJet 500 colorMFP M570dw

  Hello

  I clicked on the wrong country on the first installation of the printer.

  Now, I would like to correct the country, but the only way to change the country seems to bee if a cold reset/reset of the printer.

  How can you do a cold reset/reset with the printer HP LaserJet 500 colorMFP M570dw? I couldn't find the answer in the manual...

  Thanks for your replies

  GeHoGo

  P.S. This thread has been moved from Laserjet MFP and all-in-one - HP's Forums moderator

  What you need is a NVRAM or a Super NVRAM. Both will do the job for the same problem: initialization of memory NVRAM ATTENTION: all HP Jetdirect settings are also reset. Don't forget to print a Setup page before you perform initialization of the NVRAM. Make a note of the IP address that is listed on the Jetdirect configuration page. You must restore the IP address after a the NVRAM initialization. A the NVRAM initialization erases all data stored in the sections not protected from NVRAM. Perform initialization of the NVRAM resets the settings and the following information: ● all menu settings are reset to the factory default values. ● all location settings, such as language and national and regional, are reset to zero. After a the NVRAM initialization, reconfigure all computers that print to this product so that the computer can recognize the product. 1. turn off the product. 2 models of touch control panel: press and hold the lower quadrant right of the touch screen. Keep the depressed quadrant that you turn on the product. 3. when the Permanent storage Init. message appears on the screen, release the buttons. 4. when the product has completed the NVRAM initialization, it returns to the ready state. Super super initializing NVRAM NONVOLATILE initialization A restores the product for "generic" mode, in which you get at the factory. This means that you need to reset the language settings and country, when the product starts after initialization. A super NVRAM initialization erases all the data stored in the NVRAM protected and unprotected sections. 1. turn off the product. 2. press and hold the lower left quadrant of the touch screen. Keep the depressed quadrant that you turn on the product. 3. when the Permanent storage Init. message appears on the screen, release the buttons. 4 the super NVRAM initialization is completed, the product is in generic product mode.