Satellite A300D-11 q issue with wireless network

Hello!
My Satellite A300D-11 q has a problem with wireless communication. It has all the necessary drivers for Win XP installed and connects to the wireless router properly. However, if Windows is hibernating or going on stand by, after waking up, the computer seems connected to the router but there is actually no internet and no matter what. It gets only OK after reboot. It's bad enough.

Can anyone suggest how this can be corrected, if possible at all?

I use Satellite A300 with WXP and Win7 (dual boot) and I don t have these problems.

You can use combination of keys FN + F8 after stand-by mode to disable and enable the wireless network adapter check if the WIFI connection will be established?

Tags: Toshiba

Similar Questions

  • Can satellite M65-S9092 - I put the wireless network card?

    Hello

    Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

    So I would update my card if possible.

    Thanks in adavnce

    Concerning
    Paul

    Hello

    I think that it shouldn't be a problem to upgrade the WLan card.
    As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

    The wireless network card supports two pins for the WLan antenna cable.
    Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

    All that s

  • Re: Satellite L450-173 - unable to detect wireless networks

    I have a similar problem with my satellite L450-173.

    I bought this laptop without OS and installed win 7.
    I found and downloaded the latest drivers toshiba WLAN support and download page and my Device Manager indicates that the device is turned on and that it works correctly.

    However, I am unable to detect the networks without wire in the box (alltough there are at least three in the district).
    I have a home network with the router. When I connect to my laptop with a LAN cable, it connects automatically without problem. But I can not connect via my wireless connection.

    Windows troubleshooting is of no use.
    I downloaded the chipset drivers updated too (following the suggestion by an online forum), but which did not help at all.
    My "doctor Conectivity" reported that my wlan adapter is 'on', but when I enter the 'Radar' option, it reports that this wireless network device is disabled. I tried to disable and then enable once again, but it did not help. I also used the option reset address IP - no use. My IP address is set to auto because my network is connected by the router.
    I tried pressing FN + F8 but I have not noticed any change.

    Indicator LED for a wireless connection at the front of the laptop is always red.
    I read many forums linking similar issues to win 7, but I have not found any solution.

    Any ideas?

    Hello

    Eventually the WiFi network is disabled and so you cannot connect to the Wlan router.
    If the FN + F8 does not change the status of WLan, then it would mean that Don t FN buttons work properly have you checked if the other FN keys work?

    You must reinstall the VAP (value added package) to obtain the keys FN working again
    If you want to use the Fn + F8 then you should see (flashcard) WLan icon on the screen

    Another idea;
    You can toggle the wifi in the Device Manager-> card Wlan-> properties-> Advanced tab.
    Check this box

    PS: If the BIOS is not updated, then you need to update it too!

  • Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

    This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

    I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

    I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

    Pics:

    PCMCIA slot

    The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

    Wireless network card

    Wireless network card; It is a little damaged but it still works.

    Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

    Hi Steve

    Well, I can give t well you not answer how you can just remove the PCMCIA slot.
    There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
    Please check this specific device. Perhaps you have overlooked a few screws.

    But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

    Good luck

    Good bye

  • Satellite P300 and Win7 - cannot see wireless networks

    Hello

    I have Toshiba Satellite with Win7x64 and I bought on eBay an AR5008.

    If I boot Linux I can connect to wireless networks.
    However if I boot in win7 that I can't even see wireless networks. If I run diagnostics I get the radio is turned off.
    Even with ConfigFree I get the same message, even if the switch on the front of the laptop is on.

    What can I do? I tried all the drivers!

    Hello

    Normally, you can enable or disable the WLAN connectivity by using the equipment and the FN + F8 key combination switch.
    Did you check that?

    I guess for the FN + F8 key combination you need value-added package. You can download it on the Toshiba site.

    Last but not least, works WLAN with preinstalled OS from Toshiba?

  • Re: Satellite C660 - 29G does not detect wireless networks

    Hello.

    I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

    Once shaped my development pc, I installed Windosws 7 64-bit.

    As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

    I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

    I connect to the laptop with a cable to get access to the internet and it works properly.

    Could you please help me?
    Thank you.

    You can first test what is the status of the WLAN card in Device Manager?
    Wireless network adapter installed and registered correctly?

    If yes do not forget the wireless network card is enabled.
    Please check and post comments.

  • Satellite M40X-149 does not have wireless network

    Hi All/person

    I have a Tosh satellite M40X - 149. My problem is with the wireless operation. For about a year I used it then no problem recently the wireless from strange behavior - I would like to be connected and then she just stop and say wireless network not found then more recently the laptop has not yet locate the wireless network.

    I use a Belkin F5D7633-4 wireless router and when I update the calld their Helpline, they helped me to install the firmware for the router that has seemed to work for about 10 minutes and then the problems started to come back. They recommended that I update my card drivers - can someone tell me what it is and how I do my laptop. I am desperate to solve this, because I'm having to use the yellow cable between the router and the laptop just for surfing the net.

    Can someone help me?

    Thank you
    Mark

    Hello

    If there is no possibility try test your WLAN functionality with another network wireless (friend or maybe in your company). On this path, you should be sure if the problem occurs only with your WLAN.

    Try to install the driver for your WIRELESS Intel network card. You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1847&lang=eng

  • Satellite L500-128 - slow connection to wireless network

    I have a problem with my Toshiba Satellite L500-128.

    After I installed Windows 7 Ultimate, my laptop is very very slow at startup. He hangs on to my wireless network connection or non - wireless (no matter whether I am connected to a cable). At this point, Windows has already started, but has not loaded al my applications yet. After 1.5 minutes or so when it is connected to my network (or has decided that he cannot connect because I'm not connected to a network), it continues and all is well.

    I already installed the latest network drivers. I have a Realtek PCIe FE Family Controller and an Intel Wifi Link 5100 AGN.

    Is there anyone who has this problem and fixed it?

    Hello

    I had a similar problem on Windows XP... The problem is that I used my router DHCP service it takes up to 1 minute I could use the laptop. I searched a bit here in the forum and I tried to use static IP addresses instead of DHCP from my router service: the problem has been resolved! :)

    Please try static IP addresses and update the firmware on your router!

  • Re: Satellite A40 - can I get a wireless network card?

    Anyone know if I can get a wireless card for the A40 Satellite?

    Thank you

    Hi calibra,

    Before you buy a wireless network card, you should check if your laptop is already equipped with WLAN antennas. The antennas are installed as part of the screen and are necessary for the wireless network adapter. If you n t have it your WLAN card will find not all networks.

    By the why: you can get a compatible WLAN card to an authorized service provider. Do you know how to contact the guys?

  • Satellite A660 - unable to connect to wireless networks

    Hello

    I recently bought a Satellite A660 and for some reason, I keep having disconnected from the wireless network when I unplug my laptop. Whenever my computer is running on battery, it keeps disconnect the router and reconnect sends me problems with the internet. When it is plugged in, it works fine.

    Does anyone know a fix for this?

    Thank you

    Hey,.

    I found some similar topics, they might be useful for you:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59322
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60773

    Check this box!

  • Re: My Satellite L500-1XC can't find wireless networks

    My computer can not find wireless networks more and that's because drivers. I downloaded one I thought was mine from this page https://aps.toshiba-tro.de/wlan/?page=downloads, but the download link is no longer active :(

    I am able to select Wireless as a connection, but he does not see anything and my wifi works entirely 100% so any help would be great guys :) Thank you

    I agree with Timox: you need WLan 802.11bgn Realtek RTL8191SE Wlan card driver.
    Download driver Toshiba WLan portal should functions since I managed to download the driver of the page package.

    Alternatively, you can download the driver directly from the Realtek page: [RTL8191SE-VA2 | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  • Satellite Pro refuses to connect to wireless networks

    Hi guys! I need your help!

    My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
    all except my home router from the sky.

    I have moved since and am not able to connect to the free public Wi - Fi.
    No error message; Just click to connect to a particular network and nothing happens.

    I've been back home since and it connects automatically.
    I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

    Any ideas?

    CAL

    > I've been since back home and it connects automatically.
    This means that you can connect to your WiFi network at home without big problems?
    This indicates that s laptop WiFi connection works correctly.

    I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

    What happens if you change the Wlan standard? (802.11 a / B / G or N)
    This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

  • Satellite M45-S265 - cannot install the wireless network

    Hi all!

    My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

    But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

    P.S. - of course, I lost the CD.

    Can someone help me?

    Thank you.

    Hey,.

    > I think that I have not installed the driver corectly.
    Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

    Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
    http://www.CSD.Toshiba.com

    If you have any other questions, please let us know! :)

  • Satellite M45-S331 - 10 on the wireless network adapter error code

    Hello

    I have problems with the installation of the card WiFi on Toshiba Satelite M45-S331. The Intel pro 2200BG card is

    After you have reinstalled windows and the drivers for this card, I get the following message: "this device cannot start. ' / Code 10 / '. Where could be the problem? I found a few guides and tips for installation and reinstallation of this card but nobody does not work.

    Any help will be appreciated.

    Thank you
    Kramer

    Hey Kramer,

    Are you sure that you have installed the right driver WLAN? As far as I know that Toshiba laptops are delivered with various wireless network cards. The Toshiba page also shows Atheros WLAN drivers then perhaps you have an Atheros card?

    In addition I would try reinstalling Windows using Toshiba recovery disc. There are all the drivers and tools pre-installed.

  • Satellite sometimes does not detect the wireless network

    Hello

    My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

    Hello

    Well, in most cases the WLan driver update could solve this problem.
    In addition its advised to check the firmware of the might of Wlan router must be updated as well.
    I recommend also to reset the settings of the WLan router and set it up again

    Another idea; Disable the save option in Win 7 the power supply WLan management

    Welcome them

Maybe you are looking for

  • Watch OS 2.2.1 workouts App display zoom

    I guess it's just a bug that will have to wait for an update from Apple (watch OS 2.2.2), but everyone having display problems with the App of workouts after the 2.2.1 update. In my case, that the display is enlarged to about 125 to 150%, which means

  • can I add a memory to a mac mini?

    can I add a memory to a mac mini?

  • F4280 all-in-one print is not in Windows 7

    Hello I have the F4280 all-in - one HP printer. This printer works with Vista or XP machine, but not any portable computer with Windows 7. I had downloaded and installed software & driver for HP several times. Nothing works. I ran the HP software doc

  • I can't get my updates. the Windows Installer does not work how to fix it

    I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  • Insert adds wasting space

    11.2.0.4Having a process that inserts only adds to a partitioned table.  partitioned on one id.   Table is updated only through these pads or a drop of partition on the code.IM moving the table to re - organize the partitions and I noticed that a tab