Very strange Sample & Hold behavior on image signals

Similar Questions

• ESX4 missmatch incompatible cpu but very strange behavior of host cpu!

  Hello

  We have a very strange problem, I have 4 ESX host, each hosts have the same hardware and same configuration of BIOS (enabled on virtualization and no.-Execute Page Protection),

  but I'm not able to migrate some (my 25 vm´s 8) online to another host, offline no problem?

  do you have someone has an idea what for the problem?

  image of the error message wouled be attached.

  BR/mfg

  Andi

  Check on the CPUID mask for these virtual machines and reset it by default.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• How to acquire the signal to very high sampling frequency

  Hello world

  My name is Luke Ho. I am trying to acquire the signal with Labview (Sthelescope). The signal comes from sensor acoustics, then filters and amplifiers to adapt to ADC rank (0 - 5V). Thus, the maximum frequency of the signal is 40 kHz.

  According to the Nyquist theorem, I sampled at least 80 Khz signal.

  Is there a sampling frequency devices like that? or y at - it another way of better? I used the Arduino before, but it was about 10 kHz.

  I need your advice.
  Thank you all and have a nice day.

  holucbme wrote:

  Thanks for your recommendation

  But is it possible without USB Data Acquisition, it is quite expensive for me.

  This is the cheapest option to NEITHER. I tried to look for options to other companies, but more I found in the same price range, or not answering is not your condition of sample rate.

• My iPad WiFi Air video very slow loading same 3 full bar signal

  My iPad WiFi Air video very slow loading same 3 full bar signal... Any suggestion?

  Should I send to AppleCare or upgrade to the latest version of iOS?

  Yes, update to the latest version, 9.3.1. Also here are a few general suggestions for problems of Wi - Fi. Suggest you start at the top and down, maybe they'll help...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• Stamp tool behave very strange

  Photoshop CS5 running on an iMac with 10.8.4.

  For some time the stamp tool and the heal tool behave very strange, basically can not use them any more. When you use the stamp for example when I select the source of the past that a new image - a copy as if it created a new layer (but this is not a new layer) is created and its stuck on the mouse so when I move the mouse the whole picture gets dragged... strange. Can someone help and tell me how to solve this problem?

  Thanks Peter

  Fortunately, this is an easy solution...

  

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

  I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

  

  Here's an example, zoom level 100%.

  The forms do not look sharp at all. No idea what this can be?

  Lieselot,

  Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• Very strange problem in planning

  All,
  
  I have a very strange problem, we have two cubes recipes and Wrkforce. There is basically two forms Web - one associated with Wrkforce and other recipes.
  
  In the Webform Wrkforce, users between rates of missing data and record forms and essentially running torque of BR that aggregates the entire enterprise, centre of cost, employee the individual Q and that inturn put up-to-date "Company absenteeism".
  Inturn 'Total company absenteeism' updates "Stored absenteeism" cube recipes.
  
  Labor
  Rates of absenteeism (value of the entry level 0)
  Total company absenteeism (dynamic Calc) ('Absentee rate'-> 'Company'-> "cost Centre"-> "employee")
  
  Recipes
  Stored Absenteeism (Stored) ("absenteeism stored" = @XREF ("_WFCube_", "Total absenteeism business")
  
  Now the problem is that all of a sudden the BR have stopped working... nothing changed... everything is still however "Absenteeism Total company" is not being calculated and thus stored absenteeism is not getting updated.
  
  Please can anyone suggest what could be the problem? Or where I can look for answers.
  
  Thank you
  
  N

  Double post:- failed to create security for the following users filters

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Very strange sound problem

  Hello!
  
  Well, I have a very strange problem with my swf, I hope you can tell me why.
  
  I have 2 sounds in my library and they are referred to as 'right' and 'wrong '.
  
  I'm starting a sound variable on top of my code
  
  var novoSom:Sound = new Sound();
  
  and every time I want to use, I don't
  
  novoSom.attachSound ("certo");
  novoSom.start ();
  
  problem is that when I publish my swf is all beautiful deployment sound perfect, but every time I use the SWF in my html in the Web page don't play at all, only if you are a loadSound event that I want to. any idea?
  
  Never happened to me before and im in a very close deadline, so any help will be great!

  If you load your swf file in another swf, use:

• Values very strange when you work with dates

  Hello
  
  I'm new with oracle, and I have very strange values in a query that includes dates...
  
  This is the query...
  
  Select fechapermiso, sysdate - fechapermiso
  of permits;
  
  SYSDATE-FECHAPERMISO FECHAPERMISO
  
  JUNE 1 09 31.676
  JUNE 1 09 31.676
  10 JUNE 09 22.676
  11 JUNE 09 21.676
  6 JUNE 09 26.676
  JUNE 5 09 27.676
  JUNE 5 09 27.676
  19 JUNE 09 13.676
  10 JUNE 09 730509.676
  JUNE 11 09 730508.676
  JUNE 27 09 730492.676
  JUNE 27 09 730492.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 29 09 730490.676
  JUNE 27 09 730492.676
  JUNE 27 09 730492.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 24 09 730495.676
  JUNE 22 09 730497.676
  JUNE 24 09 730495.676
  JUNE 24 09 730495.676
  JUNE 24 09 730495.676
  
  
  Why am I getting all these huge values?
  
  Published by: user9521601 on July 2, 2009 12:19

  Hello

  Here's the dates to the first century (1-100 years).
  Appararantly, someone came in 2-digit date in an incorrect format.

  To turn them all on the corresponding date in the 21st century, add months 24000:

  UPDATE  permisos
  SET     fechapermiso = ADD_MONTHS ( fechapermiso
                               , 24000
                        )
  WHERE     fechapermiso >= DATE '0001-01-01'
  AND     fechapermiso <  DATE '0100-01-01';
  

  Published by: Frank Kulash, July 2, 2009 15:31

• Strange behavior with images

  I worked on a site with lots of images, the supplied images were all different sizes, since then they have been restocked at the same size, I dutifully updated my slide show to point to the new folder of images sizes correctly, but Muse still exported export the old images, completely ignoring the new!

  Anyone had this happen the only solution I found what to remove the slide show and do it again and then export it to a new folder!

  Hi Glen,

  Please check if the images in the slide show were sampled at the right size until you have exported the site?

  And also please check the location of these image files and try to import the business catalyst and check if it is updated slide show?

  Kind regards

  Akshay