Bejeweled 3 has suddenly a BEX error

Similar Questions

• Windows Media Center has suddenly stopped being able to see tuners. Error "could not find the tuner or all tuners are busy."

  Original title: Windows Media Center has suddenly stopped being able to see tuners.

  I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network.  Since a few weeks things have worked very well.  Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching.  Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.

  Hi Eviln,

  Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 driver corrupted or obsolete.
  3. wrong settings.

  Try the steps listed here:

  Method 1:
  I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.

  http://cetoncorp.com/product-support/

  Method 3:
  If the problem persists, you can see the steps in the following article and check if it helps.

  Watch TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

  See the article for more information.

  Get help for your TV tuner
  http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tuner

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• My iMac has suddenly ceased to import pictures from my Canon PowerShot

  My MacBook Pro (retina, 13 inches, end 2013) has suddenly ceased to import pictures from my Canon PowerShot.  When the transfer cable is set up and I turn on the camera I get a message on the camera briefly: "Communication error".  I use OS X version 10.10.5 Yosemite and Photos, version 1.0.1 (215.65.0).  My camera specialist said that the problem is not with the camera.

  You have a large SD card in the camera which is full?  http://thedesignspace.NET/MT2archives/000757.html#.VmnV5Ch8u5Ythis seems to be a problem that appears. When the card is full, the camera will not export them and Iphoto seems to not recognize the camera.   https://www.jmedved.com/2012/02/Canon-SX230-communication-error/ You could go into Iphoto preferences and change in general, connecting camera into Iphoto for capturing images. It change and then transfer to Iphoto.

• My screensaver that shows pictures of "My pictures" has suddenly stopped working.

  My screensaver that shows pictures of "My pictures" has suddenly stopped working giving the error message "this application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem"I use Windows Vista Home Premium with a 32-bit operating system.

  Where I go/glance to re - install this file?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  A screen saver that displays the images stops working in Windows:

  http://support.Microsoft.com/kb/2425702

  Method 2:

  Try to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Step 1:

  To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2:

  Download and install the latest package for the version of Windows Vista, you use and see if it helps.

  My PC running the 32-bit version or 64-bit Windows?

  You can check the below links to download the same.
  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 86)

  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 64)

  Method 3:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Hope the information is useful.

• My DVD/CD drive has suddenly stopped working under Windows 7

  Ive been using Windows 7 for about 6 months now with on any trouble until recently my DVD drive has suddenly stopped working. Windows detects the drive but when I double click on it in my computer it says please insert disc. I find the drive in Device Manager and windows recognises that there is an error that says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I tried to uninstall the drivers in Manager device and rebooted the computer to let auto windows find the driver and reinstall it but to start, I get a message that says:

  Device not installed driver software

  I know that the drive is fine because it works fine in Ubuntu Linux system he worked great in windows 7, so stopped. any help would be greatly appreciated. Thank you.

  Go to the Web site of the factory, download the driver appropriate for your device. Uninstall the driver that is currently installed and uninstall the device in Device Manager. Reboot... After you restart, you have 1 of 2 options depending on how the software is packed from the manufacturing. (A) put an end to the automatic Windows installation feature and use the downloaded software to take care of it for you... If that's how it is set up to operate or (b) wait for windows to auto-trouvez and try to install the device, and when he asked the pilots to open and extract files downloaded to any location you choose and point the installer of windows in this direction.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Windows Live Mail has suddenly stopped working

  My Windows Live Mail has suddenly stopped working.  I get the error message below.  I contacted Time Warner - talked to 3 different technicians, each gave different instructions, of which none has solved the problem.  I contacted Microsoft and they said that they do not support Windows Live Mail.   I am able to access my e-mail through Time Warner Webmail, but I want to get Live Mail works again.  Can anyone help?

  Can't send or receive messages on behalf of Wi.rr (jxxxxx). Windows Live Mail could not open a session secure e-mail server using password authentication. Contact your e-mail provider and verify that it supports secure password authentication. To change the connection setting, in the folder list, right-click on the account name, and then click Properties on the shortcut menu. In the Properties dialog box, click on the servers tab, and then under incoming mail server, select a logon option.

  Server error: 0x800CCC90

  Server response:-ERR an authentication mechanism MUST be entered

  Server: 'mail.twc.com '.

  Windows Live Mail error ID: 0x800CCC18

  Protocol: POP3

  Port: 110

  Secure (SSL): No.

  Windows Live Mail could not open a session using authentication Smail server fix Password has.

  I don't think it's something that 'suddenly' happened. Does not support the server you connect to SPA, so if you have this option, you will be not be been able to connect to this server. You may have changed the setting to try to solve another problem?

  Right-click on the account name in the folders pane, and then select Properties. On the servers tab, select connect with authentication in clear text. Then try send/receive for this account. If you see an error message, please copy and paste into your answer.

• device cd/DVD problem has suddenly stopped working?

  the dvd/cd device on my hp g62 has suddenly stopped working I tried to fix, but no swallows someone can help?

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working.

  I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working. Error message says. "licensing for this product no longer works."  Inside the box he is also says, "you can no longer use this program at this time.  You must fix to uninstall and reinstall the program or call technical support. However, whenever I install it I get a message that is INSTALLED successfully.  Can anyone help me, please.

  Thanks John.  I did all this and still nothing worked. I finally got help from a stranger (not in the USA) tech of cat. I guess she got hold of me and sent me a link to download this file. Eureka! It worked...  Posting it here in case anyone else has this problem. She told me that there is NO SUPPORT for Pro 9 except the forums. I'm happy you're here. Keep up the good work.  Here is the page to download the file.

  Download Adobe Acrobat products. 9, 8

  Here is the file that I used that worked for Pro 9 on Windows. Oops, it won't let me attach the file. If anyone knows how I can do make me know.

  Thanks again.

• What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  I clicked on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Hello

  I'm a bit confused. Your title says
  

  What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  Yet your said OP
  

  Click on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Your problem is resolved or not?

  Right-click on an empty space in the toolbar, then click Customize, then click restore default value

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Why Twitter has suddenly stoped working in Firefox?

  Twitter has suddenly stopped working on Firefox. I have not noticed any action on my calendar for 10 minutes and now all I get message "the connection was reset" and refuses to load. It works fine on IE. Anyone else does?

  Yay! Fixed a problem. Thank you guys!

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• Hotmail has suddenly changed appearance and now present on the top of the page blue with lines. I have a screenshot...

  Run Firefox 15.0. Hotmail has suddenly changed appearance and my page is not at the bottom of the screen. The top 5/6 of the page is a series of horizontal blue stripes. Text in the blue section is the Windows Live titles such as ' home, Mobile devices, etc. When I try to compose a new message, text in the blue box partially covers the 'To' button, so I need to position the slider at the bottom of the button to enter an address. I have tried Hotmail in IE and it seems fine, so it must be a problem of compatibility between Hotmail & Firefox. Hotmail has not responded to my questions by e-mail. I could understand that if this happened at the beginning of a session, just after I have lights, but this happened after, I had been active in Hotmail and other sites. Other sites are not affected, just Hotmail and only in Firefox.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Already tried safe mode?

  • https://support.Mozilla.org/KB/safe+mode

• Portege A100 has suddenly started to freeze

  My Portege A100 has suddenly started to freeze without valid reason.

  It has also hurt to turn sometimes blue light appears on the disc hard turns, but not much happening and the screen remains empty.
  Sometimes he'll get into windows and I want to use it then suddenly stop responding completely.
  It does this in SafeMode as well ad from a cold start.

  The strange thing is that it seems to be triggered physically sometimes but I couldn't swear to it and maybe it's just a coincidence.

  any ideas?

  Hello

  Description seems you very strange because the question what you described happens sometimes. Eventually it s only a software malfunction?
  How the operating system is running on the laptop?

  What do you think of the resettlement using the recovery CD?
  This relocation and new OS can sometimes solve problems of frizzing.

  But if the portable feed then you should try another suggestion.
  You must remove the power supply and adapter of the laptop. Then wait several times (10-15 min). Put the power supply in the laptop and connect the power adapter.

  Then, launch Notepad.

• iBooks has suddenly stopped sync between my iPhone and iPad

  iBooks has suddenly stopped syncing between my 6s iPhone and iPad Mini.  Both are running iOS 9.3, and the sync was working well for several days after I updated the two devices.  The two options of synchronization (bookmarks/notes and collections) are enabled for both devices.  And no matter on which device I add a bookmark or a note. It will not synchronize with the other device.

  I rebooted both devices and enabled the synchronization options, and then on again, but I was not able to run.

  Any ideas as to what is happening?

  Thank you.

  I'm having the same problem. I have iBooks on my iPhone, iPad and Mac and I cannot get any of them to Favorites sync. However, purchases are synchronized.