Best actor in a drama of Crime

Similar Questions

• framework of the actor

  Hello

  Where can I get the version of the Framework of actor that I have on my PC?

  Best regards, Bjarne

  Hi Bjarne.

  If you use LabVIEW2012, the framework of the actor is located at:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\vi.lib\ActorFramework

  For LabVIEW2011, you can find user.lib.

  If you open the lvlib and go to properties, you should be able to see the version:

  

  If you have installed the framework using VI Package Manager you can see as well the version here:

  

• How to inherit from Actor.lvclass?

  Hi all

  I'm playing with the framework of the actor. After reviewing the sample cooler evaporative project, I want to make an absolute minimum example from scratch. I want to open a blank project, manually add a few classes, make them inherit from Actor.lvclass so on (for example not start since the draft framework for actor model).

  The first problem I encountered (and not yet resolved) is How to inherit from the Actor.lvclass?.

  Time evaporation cooler project (ECEP) example and the project of the actor model framework (AFPT) have some classes already inheriting from Actor.lvclass new classes will have this option of legacy. ECEP and AFPT have also vi.lib-> Framework.lvlib actor in their dependencies.

  But how actor Framework.lvlib in my dependencies? I can't just drag C:\Program NIUninstaller Instruments\LabVIEW 2012\vi.lib\ActorFramework\Actor Framework.lvlib with dependencies in my Project Explorer.

  However, I can drag C:\Program NIUninstaller Instruments\LabVIEW 2012\vi.lib\ActorFramework\Actor Framework.lvlib in my Project Explorer (like adding a VI to the project). This gives me the ability to inherit from Actor.lvclass and if I remove actor Framework.lvlib in my project again (after a class inherit) it will be listed under dependencies. But I hope that there is a way to better / cleaner to him.

  I wish it works when I move the project to another computer with a different labview installation path. My approach above will ensure that Framework.lvlib of the actor is still loaded in the subfolder vi.lib or is it now "hardcoded" aware of my installation path?

  Best regards
  Jonas CJ

  You should read some documents and tutorials on LVOOP, because it is the mechanism that is used. In this case, you must have the responsible actor in the project, so the simplest is the frame screws fall into a vacuum of VI, then go into your properties of the class, go to the legacy page and click the button change. The tree shows you the class loaded into the project, that's why you need the first step for the first class. After that, the class is already loaded, because the other your class inherits from this one, you don't need something it explicit the call.

  With respect to the path, vi.lib is a logical path, so it does not work properly when moving between computers and versions of LV.

• When I start my computer the clock speed of dram seems incorrect. Help, please.

  Original title: dram clock speed.

  When I start my computer the clock speed of dram shows at 133, but I use pc3200 which is 400.  I understand that you must double the clock speed of the dram when using dual ram, but dram clock speed should be 200?  and if so how do I ftx like it, thanks ernie,.

  following my recent posts, I tried a few other sticks of ddr400, today, I put them first into single just like sticks and the dram clock speed is 400.  as you advised the previous ram was poorly labeled so.  at the moment, I have two sticks of ddr400 and and everything seems to be fine.  I'll invest in a pair of quality ddr400 and I hope that now my problem is solved, thank you for your help and advice, and pointing me in the right direction to find the problem, I enjoyed it, best regards, ernie.

• When you draw paths, what percentage of level best to see the image?

  Hello

  When drawing paths in the PS, which is the best level increase percentage to display the image? I find that 200 to 400% is sometimes useful, but sometimes 300% is too big and the edges of my selection become indistinguishable from the background. What are the techniques of zoom percentage that others use all pulling the railways?

  Thank you.

  Patrick

  Patrick, the answer is that it all depends on what you're trying to isolate, how you plan to use and how fast you need to do. I will describe a couple of scenarios.

  If you are knocking out 25 pictures of products, you need to go fast. Some studios will order their retouchers remain with zoom at 50% only. For general color/brightness, no drama, describing changes a form on this scale will be fine. The resulting mask will not be perfect, but it will go faster than the zoom to 100% because you will be with less detail.

  If you need a little more precision, zoom and more. So the question is: where to place the path on the edge of the element you want to isolate.

  If you plan to break the clip from the bottom, then place the path inside the border of the element. As long as you're fairly accurate, the fact that you can cut the edge pixels will be not easy for the Viewer to the end. It's better, because you can trim off the coast, say, clothing fabric in excess and idealize shape more. When hit against a new background, the shape will be better and no one will notice that you have trimmed it anyway.

  If you plan to keep this element in their existing background environment, you have to be more specific. As you say, you could perform a current zoom 100%. I'll generally not much past plu 150% because we always need to take a view of the overall shape, the forest from the trees so to speak. In this case, you'll want to put the path in the pixel areas liminal along the edge - right between where you see the transition of the element edge pixels and the background. If you make dramatic changes hue/lightness, you will need to massage the mask edge later to reduce the edges that appear.

  And don't forget to put a small feather on the resulting mask is always the key.

  Hope that helps, check out my blog if you are interested to learn more about the techniques of cutting, I'll post some in the future.

• Best way to film this scene, stitch together plates or green screen?

  I have a call where I walk past a player with him framed on the right of the screen, ' actor A. ' then on the shoulder 'Actor A' (on the left side of the screen) another character is in sight, "actor B." at the end of shooting the camera move to stop and I want at the speed of the actor 'A' of the ramp so that it revolves around very quickly While the 'B' actor maintains a normal speed (which is him walking toward the camera as well). Is the best way to do this shoot with two plates separate and assemble them (if if, what is the best way to assemble the shots)? Or is - this green screen actor 'A' or 'B' and add them in? Remember, the camera moves to the rear while the actor 'A' heading, when moving player 'B' is also in the shot. Ramp speed of the actor 'A' occurs once it stops (it will whisk around extremely fast), how the camera will also be stopped.

  You have a few options. Usually, I start a VFX shot by the thought of the movement of the camera. If I move the camera what are the problems that will result?

  According to your description, you have a dolly with two actors. Tracks camera, the first actor as the second player enters the scene, then the unit stops and the second actor continues to his notes at normal speed while the first actor is accelerating. Two shooting plates will give control the moment where the first actor, but, in view of the camera move, requires you to simulate accurately the moment where two follow-up plans so the point of view between actors is consistent. It doesn't matter if the photos are on a green background. For the view between the two actors to match the camera moves must be identical to the camera angle and the speed of follow up.

  If, however, you shoot all the action in a single pass while you can use rotoscoping to separate into two pieces shooting where the camera stops moving and then adjust the time where the first actor. This works easily if you make sure that you don't move the camera at all once the track ends.

  If the players do not overlap so the second option is a piece of cake because your roto can be a very simple rough mask. If the players overlap in the framework then your roto work will have to be very precise when the players overlap, and you may need to perform a few background replacement to fill in the holes.

  If you decide to do with two plates, then you will probably need to track movement. stabilisation and re-synchronization of two shots to make them at the height. If the camera is moving when you accelerate the first actor, you will have to keep track of movement.

  A final option is to pull the first actor on a green screen and the second player as a bottom plate and then follow and stabilize the two shots to try to combine them. Here again, if the speed and angle of the two plans that you combine are not identical or at least nearby enough that you can easily fix them you'll be in a lot of tweaking to than the shots work.

  If it were my project, I shoot the two actors in a single plug and then divided take it there where should be the first actor have the speed change and make a few roto work. That seems to be the most straightforward approach.

• Best way to keep the battty

  My phone is iPhone 6 Grey, 64 GB with IOS 10.0.2.

  My phone battery screen was error and I have changed a new battery for two times. I want to know is the best way to protect my battery.

  Charge it as often as you can.

• What is the best way to buy an iPhone Unlocked 7?

  Hi all

  I am currently using T-Mobile and want to get the new iPhone 7. Since there is no option for a sim-free iPhone, what is the best way to buy the new iPhone? Should I get the T-Mobile one full fare? I know that he will be released version but it will come with a T-Mobile sim so what will do with the sim card? Put it away or give it to T-Mobile? Or should I wait for the version without card sim to appear, which I don't think that will come out until November, and I don't want to wait that long.

  Thank you in advance.

  If you do not want to wait to pay full price for the model from T-Mobile.  You can do whatever you want with the SIM card.

• Best way to make my SSD works again with a single partition

  There are 2.5 years, I replaced the original on my computer with a SSD hard drive. Months after I installed the beta version of Yosemite, the latest operating system for Mac at the time. To do this, the system created a partition on my drive, in which he has installed the beta version of Yosemite.

  I have today on the same partition, I installed Yosemite, Sierra macOS running. In the other, I have all files, so I want to eliminate. However, when I try to do this by using the disk on my Mac utility, it is not possible; I get a message that says I can't delete the first volume of the disc. When I try to increase the size of the partition on which macOS Sierra operates, so reduced the size of the other, the system won't let me.

  I would like to know what is the best way to make my SSD works with only one partition.

  You cannot delete the last partition that was created, that not 1.

  You can clone the content from the 2nd to the 1st, then you can remove the 2nd.

• What is the best OS for a late 2008?

  What is the best OS for a late 2008?

  El Capitan.  He will run the latest apps and have the latest safety features.

  Do not install the maximum RAM that your model will accept (best sources RAM compatible Macs are OWC and Crucial).  If the bank account is fat, install an SSD (Crucial and OWC SSD are recommended).

  Ciao.

• Best OS for a MacbookPro, end of 2008?

  What is the best OS for a MacbookPro, end of 2008?

  It depends on your use.

  For OSX 1088 and earlier browsers are is more updated to fix security vulnerabilities

  The onver of Mavericks and later versions are still.

  You Mac can run and including El Capitan, but not of Sierra.

  Mavericks, Yosemite and El Capitan is not in the Mac App Store. If you previously download them you can always redownload them via the purchase of the Mac App Store

  You can buy codes to download for Lion and Mountain Lion

• What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  The recommended method for re-index/reconstruction is to open Spotlight preferences panel in system preferences, click on privacy. Now add the drive that you want to re - index to privacy window. Now delete this same player of the Privacy window, and it will now be indexed/rebuilt. No necessary terminal command.

• Best sites to keep disappear once history of safari is disabled

  I'm trying to put Hotmail and my work see connectivity service as my best sites, but every time I clear history in safari that they disappear. It is only on these two sites that make others seem to work well.

  Any advice? Cheers.

  Hi Aur0xx,

  Welcome to the communities of Apple Support!

  We understand that you are trying to add Hotmail and your workplace for your Safari Top Sites, but when you clear Safari history, these sites disappear.

  The first article below explains that Top Sites that are not marked as permanent will be deleted if you clear the browsing history Safari.

  Safari for Mac: delete your browsing history Safari

  This article explains how to maintain a website in Top Sites.

  Display your Top Sites - using Safari

  • Keep a site up to the Top Sites: Hold your pointer over the thumbnail of the Web site, and then click the PIN icon appears. To unlock the site Web for Web sites can be replaced, click the PIN icon again.

  Once you have Hotmail and your workplace configured to appear constantly in the Top Sites, Safari history resetting shouldn't delete these sites.

  See you soon!

• Cannot repair the photo library. The best way to restore from iCloud library?

  The photo library of the system is damaged and cannot be repaired.

  It is said "Photos has attempted to repair the library"Pictures Library 2015 ", but can not open it." .

  
  

  I first met problems with this library a week before and at the time where I could repair and open the library successfully, but lacked a month value of photos.

  Given that it was successfully in the iCloud library, I left it to re - sync - but this process suspended several times before the end, and the photo library of the system now seems to be permanently damaged.

  I have no project of marked or impression of faces in the photo library of the system, then I would be happy just to restore from iCloud.

  My plan is to put in place a new - empty - library and then that designate the library of the system.

  If I understand this right, the new (empty) system Photo library will now resynchronize with iCloud and will copy all the contents of this library of back to my Mac.

  Is this correct? It is the most effective way to restore my library?

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  Is this correct? It is the most effective way to restore my library?

  Yes, if you don't have a useful upward on your Mac.

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  How do you call a large library, I've never had a corrupt Library, I think that your problems are not the result of the size of the library, but rather something else. From my experience it is recommended to maintain a local upward, I use Time machine, but also have a second to the top using a third-party backup solution.

• white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  Computer works wonders but new applications are not supported by 10.6.8

  Unless you have a specific reason to choose one plus one, El Capitan.

  (144668)